Providing & Supplying Furniture at the Administration office Building & Rest House of N.P.Colony at Chanasma

BILL OF QUANTITIES

(A)Percentage Rate Tender (Up to INR 50 Cr. )

Name of work:-Providing & Supplying Furniture at the Administration office Building & Rest House of N.P.Colony at Chanasma

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

Wall Hanging Polished Brass Hand-Crafted Indian National Emblem wall hanging with brass color

4.00 1 inches width and 18inches height Finish Polished pembarthy metal handicrafts Nos 21 046.00 84

STORE WELL(Almirah)

Supplying and Placing in position store well. M2 Steel Almirah. This shall have an overall size of

mm(W) x 486 mm(D) x 1980 mm(H) with construction.

(1) It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high

yield strength) and all other components shall have a thickness of 0.9mm. These components shall be

made of CRCA ‘D’ grade high yield strength as per IS:513.

(2) The Store well should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It

should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load

Capacity of max 40 Kg.

(3) It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy

powder coated to the thickness of 50 microns (+/- 10).

The quoting price should be inclusive of all types of taxes & duties(Excluding GST) ,packing, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical specifications and As per the

direction of the Engineer In charge.

(Strictly Supply Make :-Ib By Reliable Hubs /By Decostyle Fuurniture Almirah/Godrej & Similar make)

STORAGE WITH LAMINATE FINISH

Providing,fixing, installation at site.

(1) Provide Storage with laminate finish having size of (0.9m.(L) * 1.8m.(H)), Side and back storage

unit 450 deep made out of 19 mm thick plywood IS 710 grade and back of the side unit is of 12 mm

BWP ply IS 710 is provided with vertical and horizontal devisions as per design with drawers and

shutters, lockable with all handware like auto hinges, tower bolt, magnetics catcher, handle and lock

of approved quality.

(2) The cabinet should be raised 75/100mm above floor. Inside 1 MM thickness balancing laminate.

Exposed outside surface finished with 1MM thickness standard grade laminate. All exposed edges

finished with first quality Teakwood beadings to be finished in hard high gloss PU coating.

The quoting price should be inclusive of all types of taxes & duties (Excluding GST), packing,

forwarding, loading, unloading, installaion. As per choice of users department and Concern officers in

charge as directed by the Engineer in Charge.

Providing COFFEE TABLE of Standard size, Supply & Placing coffee table and placing in position .

The table is made of Glass top with SS understructure. 10 mm tampered glass top, 8 mm tampered

bottom glass for storage option. Chrome plated understructure, Passed 48 hours salt spray test.

Glass attached to the understructure via UV disc, Load bearing capacity : 20 Kg. The quoting price

should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading,

unloading, installaion. Supplied strictly as per our technical specifications and make. As per the

direction of the Engineer In charge.

(Strictly Supply Make :-Krijen Lodgy,Flipkart Perfect Home,Nilkamal Luna & Similar make )

CENTER TABLE(Size: L-1m. B- 0.6m.)

Providing and supplying Centre Table/Tipoi with Glass top made with 19mm Thk. Plywood finished

with 1.0 mm Thk. decorative laminate sheet specified and approved by architect & fixed with

necessary fixtures and fastening (Hardware) inclusive of approved melamine polishing work. Top part

of center Table covered with 8 mm Thk. toughened Glass with Polished Edges. Complete as per

instruction of Engineer in charge.

Providing and supplying SS dustbin made with SS 304 Grade sheet which has very good material

strength, and it is also Sturdy and Light weight, with volumemetric capacity Ranging from 7 to 10 Kg

( 8 to 11 Ltr) , with/without paddle and without lid. Easy to clean , corrosion free and also matt

finished buffing process. The quoting price should be inclusive of all types of packing, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical specifications and make. As per

the direction of the Engineer In charge.

(Strictly Supply Make :-Parasnath,JAINFAM,OPR & Similar Make)

HIGH BACK CHAIR

Providing and supplying Revolving ,Tilting High back chair with M.S frame work. Finished with

leather/Synthetic Leather/Fabric as per selected make and model provided by company.The chair

7.00 7 should have 3 years warranty. As per choice of users department and as directed by the Engineer in Nos 22 045.00 1 54

Charge. The quoting Price Including Cost of packing, forwarding, loading, unloading, installaion (For

Executive Engineer & Conference Room).

(Strictly Supply Make :-HOF, Durian Alpha,REDOAK ROVAIO & Similar Make)

HIGH BACK CHAIR

Providing and supplying Revolving ,Tilting High back chair with M.S frame work. Finished with

leather/Synthetic Leather/Fabric as per selected make and model provided by company.The chair

10.00 8 should have 3 years warranty. As per choice of users department and as directed by the Engineer in Nos 14 998.00 1 49

Charge. The quoting Price Including Cost of packing, forwarding, loading, unloading, installaion. (For

Deputy Executive Engineer & Meeting Hall)

(Strictly Supply Make :HOF, Durian President ,Nilkamal Valentina & Similar Make)

HIGH BACK CHAIR

Providing and supplying Revolving ,Tilting High back chair with M.S frame work. Finished with

leather/Synthetic Leather/Fabric as per selected make and model provided by company.The chair

60.00 9 should have 3 years warranty. As per choice of users department and as directed by the Engineer. Nos 14 985.00 8 99

The quoting Price Including Cost of packing, forwarding, loading, unloading, installaion. (For

Assistant Engineer & Conference Room)

(Strictly Supply Make :HOF,Nilkamal Trenvi,Goderej Prime & Similar Make)

MEDIUM BACK CHAIR

Providing and supplying revolving & Tilting Medium back chair for conference with M.S frame work.

Finished with leather/Synthetic Leather/Fabric as per selected make and model provided by

22.00 10 company.The chair should have 3 years warranty. As per choice of users department and as Nos 8 103.00 1 78

directed by the Engineer in Charge. The quoting Price Including Cost of packing, forwarding,

loading, unloading, installaion.

(Strictly Supply Make :- HOF,Durian Marshal,Goderej Marvel & Similar Make)

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

Providing and supplying Visitor chair for staff visitors with M.S frame work. Finished with

leather/Synthetic Leather/Fabric as per selected make and model provided by company .The chair

should have 3 years warranty.As per choice of users department and Concern officers in charge as

directed by the Architect/Engineer. The quoting Price Including Cost of packing, forwarding, loading,

unloading, installaion. As per choice of users department and as directed by the Engineer in

Charge. (Strictly Supply Make :-HOF, Durian Dell, Nilkamal & Similar Make)

VISITORS GROUP SEATING

Providing & Supplying Approve Make and Model Visitors Group Seating As per choice of users

department and Concern officers in charge as directed by the Architect/Engineer. The quoting Price

Including Cost of packing, forwarding, loading, unloading, installaion.As per choice of users

department and as directed by the Engineer in Charge.

(Strictly Supply Make :Nilkamal, Restomatt Metal, IB Basics & Similar Make)

Providing & Supplying Super delux chairs having size :- 540 mm (W) x 867 mm (H) x 605 mm (D)

with minimum 4 Kg. weight & along with hand rest arms made from high quality material. The

quoting price should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding,

loading, unloading, installaion. Supplied strictly as per our technical specifications and make. As per

choice of users department and as directed by the Engineer in Charge.

(Strictly Supply Make :- Nilkamal, Cello Triangle, Anmol Mistique Keya & Similar Make)

THREE SEATER SOFA

Providing & Supplying Approve Make and Model 3 Seater Sofa As per choice of users department

5.00 14 and as directed by the Engineer in Charge. The quoting Price Including Cost of packing, forwarding, Nos 31 635.00 1 58

loading, unloading, installaion.

Approved Make :-Godrej Bibbin,Nilkamal Novelty ,Durian Fiona & Similar Make

TWO SEATER SOFA

Providing & Supplying Approve Make and Model 2 Seater Sofa As per choice of users department

and as directed by the Engineer in Charge. The quoting Price Including Cost of packing, forwarding,

loading, unloading, installaion.

(Strictly Supply Make :- Godrej, Robert Letherette by Evok ,Durian Berry Letherette & Similar Make)

Providing & Fixing S. S. Plate Signages of required size(14" * 5") and 1.2 mm thick name plates with

matt finish buffing process of 304 grade mentioning officers names/designations etc. The quoting

price should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading,

unloading, installaion. As per choice of users department and as directed by the Engineer in Charge.

Providing & Supplying Approve Make and Model Writing Board As per choice of users department

11.00 17 and as directed by the Engineer in Charge. The quoting Price Including Cost of packing, forwarding, Nos 2 775.00 30

loading, unloading, installaion.

Providing & Supplying Notice Board - Soft Board with decorative alluminium border with 2-way

hanging options having size of 1600 (L) X 1200 (W) with all necessary fixtures, pins & accessories

7.00 18 etc. The quoting price should be inclusive of all types of taxes & duties (Excluding GST) ,packing, Nos 3 104.00 21

forwarding, loading, unloading, installaion. (Make :- Title Display / Scholar & Similar Make) As per

choice of users department and as directed by Engineer in Charge.

NOTICE BOARD WITH GLASS DOOR

Providing & Supplying Notice Board of required size. structure should be made of 18/19 mm thick

plywood , finished with 1.00 mm thick laminate on all exposed edges and front shall be covered with

4.00 19 5 mm thick sliding glass with 100 to 150 mm plywood framing on periphery including the cost of all Nos 11 322.00 45

required materials and labour. The quoting price should be inclusive of packing, forwarding loading,

unloading, installaion As per choice of users department and as directed by the Engineer in Charge.

Providing and fixing roller blinds of the following specifications:

(1) The drive unit shall be made up of moulded plastic with steel spring support & inserted into the

tube and it shall be driven by a ball chain pulley with ball chain and can be positioned at right side or

left side of the shade. The shade when lowering and rising, shall be automatically locked in position

upon release of the ball chain by means of a buildup in friction lock.

(2) The end plug shall be moulded of plastic with a steel location pin. The plug shall be inserted into

the tube end. (Opposite to the driver unit) the support brackets shall be of coated steel & provided

with covers and used in right hand positions deffirentiated by the acceptance of the rectangular drive

unit support or round ldler plug pin.

(3) The roller tube shall be of extruded aluminimum with 38MM internal diameter & skin thickness of

1MM & shall incorporate a key way integral with the tube to accommodate the spline. The outside

diameter shall be 40MM,the bottom rail shall be stiffening inserted into bottom rod pocket.

(4) The material may be timber, PVC Covered steel tube or VB bottomrail.

(5) The ball chain should be of 2MM diameter cord with 4.5 MM diamater acetal balls moulded co-

axially to it on 6MM pitch to form an endless ballchain, which is used for raising or lowering action of

the shades. etc, complete as per manufacturers specifications, detailed technical specification and as

per EIC/Architect.

The Fabric shall be as per selection from approved make vista / Neon. The quoting price should

be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading,

installaion. As per choice of users department and as directed by the Engineer in Charge.

Providing & applying of decorative canvas base PVC wall paper (plain textured) storical or natural,

fixed with anti bacterial adhesive bartoline. it comes in roll from 21" or 42". The quoting price should

be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading,

installaion. As per choice of users department and as directed by the Engineer in Charge.

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

HYDRAULIC DOOR CLOSER

Providing & Fixing Heavy Duty hydraulic Door closer surface mounted type (grade 3) of standard

make made of cast aluminium body, 105'degree openable fixed to the door with all necessary fixtures

& fasteners etc. The quoting price should be inclusive of all types of taxes & duties (Excluding GST)

,packing, forwarding, loading, unloading, installation. As per choice of users department and as

directed by the Engineer in Charge.

Providing and Supplying Photo concept with unique design, shape & decorative wooden frame with

polishing having size of 950 x 650 and posters are historical and decorative artwork on the canvas

14.00 23 materials. The photo shall be supplied as per the choice of the user department. The quoting price Nos 9 812.00 1 37

should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading,

unloading, installaion. As directed by the engineer in charge.

Providing and supplying Ceramic, FRP, PVC, S.S Flower Pot having size 450 mm Ø & 300 mm To

900 mm(H). The cost shall include artifical flowers, decorative gravels etc. The quoting price should

be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading,

installaion. As per choice of users department and as directed by the Engineer in charge.

WOODEN STAFF TABLE (Size : 1800 x1110 x 760)

STAFF TABLE WITH SIDE UNIT & REAR UNIT (TABLE SIZE = 1800 X 1110 X 760 MM HEIGHT)

(1) Providing and supplying Table made with 19mm Thk. Plywood(M1) IS 710 structure as per

architect drawing finished with 1.0 mm Thk. decorative laminate on outside portion & 0.8 mm Thk.

liner Laminate inside as specified & approved by architect with fixed with necessary fixtures and

fastening (Hardware) as per architect drawing. The top/side shall be of 36 mm thickness plywood +

1 mm thickness Laminate. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole

Cover 60mm, Key-board trey, S.S legs, Drawers with telescopic roller channels , Handle and locking

arrangements with all necessary fixtures and fastening.Provide Shutters as per drawing fixed with

handle , hinges , magnet , complete with bidding patties and all required hardware.Provide 75MM x

40MM teak wood leg rest. All exposed edges shall be covered with required Teak wood beading

Patti finished with approved melamine polishing work. Complete as per architect's drawing and as

per instruction of architect & engineer in charge.

(2) DRAWER UNIT: (Size : 600 x 400 x 500 mm)

5.99 25 The basic structure of the drawer unit shall be made out of 18 mm ply. It will have series of drawers Sqm 17 105.00 1 02

(1 small at top & 3 of equal height below the same), made out of 12 mm thickness plywood sides,

mm thickness plywood at bottom & 18 mm ply front facia & side supports with sliding telescopic

channels. And covered with all exposed are of the drawer using with indian teak wood bidding , as

per required size shall be fixed between each drawers.

(3) SIDE UNIT (900 X 600 X 760 MM)

The basic structure of the side unit shall be made out of 19 mm thickness plywood sheet. and

covered with 1.00 mm thickness laminate on out side and 0.8mm thick balancing laminate inside. It

will have series of drawers and cup board as shown in architecture drawing. (3 cup boards and

drawers) Provide S.S legs, Drawers with telescopic roller channels , Handle and locking

arrangements with all necessary fixtures and fastening .Provide Shutters as per drawing fixed with

handle, hinges, magnet, complete with bidding patties and all required hardware.

The quoting price should be inclusive of all types of taxes & duties (Excluding GST) packing,

forwarding, loading, unloading, installaion. As per choice of users department and as directed by

the Engineer in Charge.

WOODEN STAFF TABLE (Size : 1500 x 915 x 760)

STAFF TABLE WITH SIDE UNIT & REAR UNIT (TABLE SIZE = 1500 X 915 X 760 MM HEIGHT)

(1) Providing and supplying Table made with 19mm Thk. Plywood IS 710 structure as per architect

drawing finished with 1.0 mm Thk. decorative laminate on outside portion & 0.8 mm Thk. liner

Laminate inside as specified & approved by architect with fixed with necessary fixtures and fastening

(Hardware) as per architect drawing. The top/side shall be of 36 mm thickness plywood + 1 mm

thickness Laminate. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover

60mm, Key-board trey, S.S legs, Drawers with telescopic roller channels, Handle and locking

arrangements with all necessary fixtures and fastening.Provide Shutters as per drawing fixed with

handle, hinges, magnet, complete with bidding patties and all required hardware.Provide 75MM x

40MM teak wood leg rest. All exposed edges shall be covered with required Teak wood beading

Patti finished with approved melamine polishing work. Complete as per architect's drawing and as

per instruction of architect & engineer in charge.

(2) DRAWER UNIT: (Size : 600 x 400 x 500 mm)

8.37 26 The basic structure of the drawer unit shall be made out of 18 mm ply. It will have series of drawers Sqm 16 151.00 1 35

(1 small at top & 3 of equal height below the same), made out of 12 mm thickness plywood sides,

mm thickness plywood at bottom & 18 mm ply front facia & side supports with sliding telescopic

channels. And covered with all exposed are of the drawer using with indian teak wood bidding , as

per required size shall be fixed between each drawers.

(3) SIDE UNIT (900 X 600 X 760 MM)

The basic structure of the side unit shall be made out of 19 mm thickness plywood sheet. and

covered with 1.00 mm thickness laminate on out side and 0.8mm thick balancing laminate inside. It

will have series of drawers and cup board as shown in architecture drawing. (3 cup boards and

drawers) Provide S.S legs, Drawers with telescopic roller channels, Handle and locking arrangements

with all necessary fixtures and fastening.Provide Shutters as per drawing fixed with handle, hinges,

magnet , complete with bidding patties and all required hardware.

The quoting price should be inclusive of all types of taxes & duties (Excluding GST)packing,

forwarding, loading, unloading, installaion. As per choice of users department and as directed by

the Engineer in Charge.

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

STAFF TABLE WITH SIDE UNIT (TABLE SIZE = 1350 X 750 X 760 MM HEIGHT)

(1) Providing and supplying Table made with 19mm Thk. Plywood structure as per architect drawing

finished with 1.0 mm Thk. decorative laminate on outside portion &0.8 mm Thk. liner Laminate inside

as specified & approved by architect with fixed with necessary fixtures and fastening (Hardware) as

per architect drawing. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover

60mm, Key-board trey, S.S legs, Drawers with telescopic roller channels, Handle and locking

arrangements with all necessary fixtures and fastening .Provide Shutters as per drawing fixed with

handle, hinges, magnet, complete with bidding patties and all required hardware.Provide footrest as

per drawing. All exposed edges shall be covered with required Teak wood beading Patti finished with

approved melamine polishing work. Complete as per architect's drawing and as per instruction of

architect & engineer in charge.

(Refer drawing)

The basic structure of the side unit shall be made out of 19 mm thickness plywood sheet. and

covered with 1.00 mm thickness laminate on out side and 0.8mm thick balancing laminate inside. It

will have series of drawers and cup board as shown in architecture drawing. (3 cup boards and

drawers) Provide S.S legs, Drawers with telescopic roller channels, Handle and locking

arrangements with all necessary fixtures and fastening.Provide Shutters as per drawing fixed with

handle , hinges, magnet, complete with bidding patties and all required hardware.

The quoting price should be inclusive of all types of taxes & duties (Excluding GST) packing,

forwarding, loading, unloading, installaion. As per choice of users department and as directed by

the Engineer in Charge.

WOODEN STAFF TABLE (Size : 1200 x 750 x 760)

(1) Providing and supplying staff wooden table having size of 1200 MM x 750 MM x 760 MM Height.

BASIC STRUCTURE: The basic structure of the table shall be made out of 18 mm thickness plywood

IS 710 with all open edges covered with indian teak wood bidding. The top/side shall be of 36 mm

thickness plywood + 4 mm thickness teak veneer.

(2) DRAWER UNIT: (Size : 600 x 350 x 500 mm)

The basic structure of the drawer unit shall be made out of 18 mm ply. It will have series of drawers

(1 small at top & 3 of equal height below the same), made out of 12 mm thickness plywood sides,

mm thickness plywood at bottom & 18 mm ply front facia & side supports with sliding telescopic

channels. And covered with all exposed are of the drawer using with indian teak wood bidding , as

per required size shall be fixed between each drawers.

GENERAL: The table. should have 75MM x 40MM teak wood leg rest .There should be provision for

20.70 28 cable manager system with necessary cutouts in top surface. There will be a 18 mm ply shelf for Sqm 15 152.00 3 13

FINISHES: The entire table shall be in 1 mm thickness laminate finish on horizontal & vertical

surfaces on all open external sides. It will be in 1MM thickness balancing laminate on internal

surfaces , including drawers, below the top of table and back side and side rack also. All the visible

teakwood bidding shall be finished with melamine polishing. The table shall have all required

hardwares, fixture and fastening & shall be installed in positon. And work shall be done as per

drawing and directed by architect engineer in charge. The quoting price should be inclusive of all

types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading, installaion. As per

choice of users department and as directed by the Engineer in Charge.

CONFERANCE TABLE

Providing and supplying wooden conferance table having size of 10000MM x 600MM x 750MM

BASIC STRUCTURE:

The basic structure of the table shall be made out of 18 mm plywood IS 710 with all open edges

covered with wooden beading of required size. The top shall be of 36 mm thickness. plywood IS

+ 18 mm additional ply patta with teakwood moulding of required size on external sides & 100mm

box made out of plywood on internal sides can be made opnable to operate from the bottom for

cabelling purpose. The middle verticle support shall be 18mm ply with 1 mm thickness balancing

laminate on both side & teakwood beading. The front will have goove in veneer.

The Conference Table Shall include speaker and mike as directed by the Engineer in Charge.

The table should have 75MM x 40MM teak wood leg rest .There should be provision for cable

manager system with necessary cutouts in top surface.

The entire table shall be in 4 mm thickness teak veneer finish on horizontal & vertical surfaces on all

open external sides. It will be 1MM thickness balancing laminate (matching to veneer) on internal

surfaces. All the expose area and wooden beading / members shall be in 2 mm thickness hard

High gloss P.U. COATING. The table shall have required hardwares ,fixtures and fastening & it shall

be installed in position as per layout. And work shall be done as per drawing or directed by architect

engineer in charge. The quoting price should be inclusive of all types of taxes & duties (Excluding

GST), packing, forwarding, loading, unloading, installaion. As per choice of users department and as

directed by the Engineer in Charge.

Providing and Supplying Lecture Table/Wooden Teachers Podium having size - 700 (L) X 500 (D) X

1505/1380(H) mm the entire structure should be made up of using 18 mm plywood IS 710 and

mm thickness laminate with one drawer & necessary wooden support framing with PU Polishing,

2.00 30 fixture and fastening. The quoting price should be inclusive of all types of taxes & duties (Excluding Nos 17 012.00 34

GST), packing, forwarding, loading, unloading, installaion. As per choice of users department and as

directed by the Engineer in Charge.

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

Providing and supplying seminar hall stage made with using 19mm Thk plywood 0.600 center to

center horizontal & Vertcal support beetween frame and good quality wood frame structure with

required necessary legs support fixed with necessary fixtures and fastening ( hardware) having depth

10.00 31 of plateform should be 0.45 mt height All exposed edges shall be covered with required teak wood Sqm 702.00 7

beading Patti. The whole Dias Top & open Sides must be finished wooden flooring. DIAS Shall

include speaker and mike as directed by the Engineer in Charge. Complete as per instruction of

engineer in charge.

Supply, Installation Testing & Commissioning of 2000-4000 Lumens; Portable LCD Projector Feature

WUXGA (1024 x 768 pixel) Resolution; Contrast Ratio 10,000:1 (all white/all black); Keystone

Correction Range Vertical: maximum ±25° (auto/manual, input: WUXGA), Horizontal: maximum ±30°

(manual, input: WUXGA); including cost of ceiling mount kit, HDMI cable etc. As directed by engineer

(Make :- Sony, Hitachi)

Providing & Supplying Screen for projector with motorized screen of 5' X 7' with standard pure white

fiberglass reinforced vinyl including quite motor & roller system wireless handle remote built in - RF (

Radio frequency ) receiver with necessary attachment etc. complete as directed by Engineer in

Providing & supplying of Dining table with top size 1830 x 1000 x 760 (H) mm the entire structure

made out by S.S 304 grade Square pipe, 50 mm Ø with 2 mm wall thickness and table top made

from 19mm thickness BWP IS 710 ply with 1mm thick laminate on both the side. Top to be rest on

1.00 34 50 mm Ø all visible part of S.S, with brush finish buffing process, totally rust and moisture proof. Nos. 13 831.00 13

Applying wooden bidding on all exposed area and shall be finished with monocoat polishing. The

quoting price should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding,

loading, unloading, installation. And as per the choice of user and as directed by engineer in charge.

SS DINING CHAIR

Providing & Supplying SS Dining Chair, As Per Standard Size, The entire structure should be made

with (S.S 304 Grade Tube i.e 25 MM Ø & 1.2 MM Wall Thickness. With S.S brush finish buffing

12.00 35 process, totally rust and moisture proof, with cushion seat & back. The quoting price should be Nos. 3 069.00 36

inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading,

installation. And as per the choice of user and as directed by engineer in charge.

ALUMINIUM PARTITION

Providing and fixing aluminum partitions partly glaze and partly fixed with extruded built up standard

tubular sections/ appropriate section size :- 63.50 MM x38.10 MM wall thickness 1.95MM (of jindal

section code - 20773 and other sections of approved make conforming to IS: 733 and IS:

fixing with dash fasteners of required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum

sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminum snap beading for glazing / paneling and dash fasteners to be paid for

separately) : 1.95 mm thick aluminum section with followings:

• Color Anodised aluminum (anodised transparent or dyed to required shade according to IS:

120.30 36 Minimum anodic coating of grade AC 15) Sqm 5 128.00 6 16

• Providing and fixing 12 mm thick prelaminated particle board, extrior grade. flat pressed three layer

or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum

doors and partition frames with C.P. brass / stainless steel hinges , handel, lock screws etc. Pre-

laminated particle board with decorative lamination on both sides Or • With float glass 5.5 mm

thickness & PLB panels of 12 mm thickness for above. The cost inclusive of the partition and doors

also as per the site situation. Strictly made with jindal make section only. The quoting price should be

inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading,

installaion. As per choice of users department and as directed by the Engineer in charge.

Plastic Garbage Bin

Providing and supplying Plastic dustbin with sheet which has very good material strength, and it is

also Sturdy and Light weight, with volumemetric capacity Ranging from 60 ltr, Easy to clean

corrosion free and also matt finished buffing process. The quoting price should be inclusive of all

types of taxes & duties (Excluding GST) ,packing, forwarding, loading, unloading, installaion.

Supplied strictly as per our technical specifications and make. As per the direction of the Engineer In

(Strictly Supply Make :-AIR O Matic,Nilkamal,Aristo & Similar Make)

OFFICER TABLE TOP GLASS

Providing & Supplying 8 mm thick Glass of approved brand for officers table top as directed by

Concern officers in charge as directed by the Architect/Engineer. the all four Edges of glass should

be moulded / chamfered as per choice of user department.

Providing & Supplying Acrelic writting deck adjustable height acrilic table top alivator inclined eassy

reading deck office tabl top as directed by engineer incharge. (24 x 18 inches)

Providing & Supplying having size 30 x 30 cm Wall clock as directed by engineer incharge.

Providing & Supplying Digital Red LED rectangle wall clock having size 39.60 x 29.60 x 3.50 cms

as directed by engineer incharge.

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

P & F PLAIN FALSE CEILING INCLUDING VERTICAL DROPS P & F suspended gypsum (Saint

Gobin) plain false ceiling by using standard company sections (GYPSTEEL ULTRA), which includes

providing and fixing g.i. perimeter channels of size 0.55 mm thick having one flange of 20 mm. and

another flange of nylon sleeves and screws, at 610 mm centers. then suspending g.i. intermediate

channels of size 45 mm, 0.9 mm th with two flanges of 15 mm each from the soffits at 1220 mm

centers with ceiling angle of width 25 mm x 10 mm x 0.55 mm thick fixed to soffits with g.i. cleat and

steel expansion fasteners. ceiling section of 0.55 mm. thickness having knurled web of 51.5 mm. and

two flanges of 26 mm each with lips of 10.5 mm. area thenfixed to the intermediate channel with the

help of connecting clips and in direction perpendiclar to the intermediate channel at 457 mm. centers.

12.5 mm tapered edge gyp board (conforming to is - 2095-1982) is then screw fixed to ceiling section

with 25 mm drywall screws at 230 mm centers.screws fixing is done mechanically either with

screwdriver or drilling machine with suitable attachment. Standard company manufactured sections

(GYPSTEEL ULTRA) should be used for the entire framework. Finally the board of size 6’ x 4’ are to

226.29 42 be jointed and finished so as to have a flush look which includes filling and finishing the tapered and Sqm 1 265.00 2 86

square edges of the boards with jointing compound, paper tape only and two coats of lapi suitable for

gyp-board (as per recommended practices of india gypsum / Saint Gobin). General notes for the item

rate include: The job includes applying two or more coats of acrylic emulsion paint in the standard

procedure of the painting job as per shade and finish suggested by the architect. The cut outs for

variety of light fixtures and other equipments etc. and the same have to be made with the frame of

perimeter channels of size: 20 mm. x 27 mm. x 30 mm. x 0.55 mm. thick, supported suitably. no

extra will be paid for this. edge beed has to be used to protect the exposed gypsum core i.e. cut

edges of opening for light fixtures. "v" grooves should be cut at every square edge joints and filled

with jointing compound and paper tape. additional g.i. or c.p. teakwood supports shall be provided for

fixing of variety of light fixtures, a.c. continues grill, diffusers etc. The contractor must co.ordinate

with electrical & AC contractor for working out various levels for the false ceiling & make the marking

on the walls / columns before starting the false ceiling work. All sections visible from the ac grill shall

be painted in black color. The final visible plan and elevation area will be considered for the

measurement purpose. The work shall be executed through authorized applicator of gypsum india

Providing and fixing cloth curtains of cotton or semi-cottton fabric with three plated or ring type

curtain pattern .with the basic rate of fabric 450 per sq.mt. The fabric with backing cloth {black out}

and 25MM OD 1.2MM thickness-304 grade mate finsih SS rods & SS.clamps , with necessary other

fixture and fastening etc. The quoting price should be inclusive of all types of taxes & duties

(Excluding GST) ,packing, forwarding, loading, unloading, installaion. As per choice of users

department and Concern officers in charge as directed by the engineer in charge.

Double Bed (King Size)

Providing & Supplying Approve Make and Model Double Bed(King Size) with mattress and Pilo with

2.00 44 Covers. As per choice of users department and as directed by the Engineer in charge. The quoting Nos. 56 999.00 1 13

price should be inclusive of all types of taxes & duties (Excluding GST) ,packing, forwarding, loading,

unloading, installaion etc.

Providing & Supplying synthetic door mats size not less than 1200 x 600 mm. The cost including

loading,unloading and Transportation Charges etc. As per choice of users department and Concern

officers in charge as directed by the engineer incharge.

Providing & Supplying Notice Board with Convenient way for storing keys with door lock,Door Cover

with locking method for security purpose As per choice of users department and Concern officers in

charge as directed by the Architect/Engineer.

PERSONAL LOCKER

Providing & Supplying Approve Make and Model Personal Locker As per choice of users department

and Concern officers in charge as directed by the Architect/Engineer. The quoting Price Including

Cost of packing, forwarding, loading, unloading, installaion.

Approved Make to be used as below.

PANTRY CUP BOARD

Providing & fixing box type compartment below Pantry of required size and as per detailed drawing

constructed the compartment / box /doors by 19 MM plywood , inside the compartment / box / doors

applying 0.8 MM balancing laminate & outside the box / compartment / doors, drawers applying 1MM

thickness laminate of approved shade and make. Framing should be made of 40 mm X 60 mm

Framing pattis. Including cost of all materials as S.S. handles and other required hardwares. The

cost Inclusive of cost of all necessary hardware, fittings & fixtures, fastenings, etc., also inclusive of

the carpentary labour,packing forwarding, transportation & cost of malamine polishing. work shall be

done as directed by engineer in charge.

Qty. Item No. Description of Item Unit Rate in Rs. Amount in Rs.

Providing and Fixing Knauf Ceiling Solutions Channeled Woodworks G13 (LV1004) CHANNELED

WOODWORKS WALL PANELLING perforated panels of width 192mm, thickness of 15mm and

length 2400 mm or as required by the Architect/ approving engineer, made of a Moisture Resistant

fibre board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved

shade & finish and a melamine balancing layer on the reverse side. The Board shall have Fire

Classification of Class 2 as per BS 476: Part 7: 1997.The boards shall have a special perforation

pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 13mm of

visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for

installation. The back of the perforated panel shall have sound absorbing non-woven acoustical

fleece having NRC of 0.50. The panels shall be mounted on special aluminium splines (keel) using

clips provided by Knauf Ceiling Solutions and approved by the Architect/ Engineer-in-Charge. The

panels to have edge cap at corners and inside transition profile for expansion and contraction joint,

Inside profile for inside and Outside AL Extrusion Profile with Wood Profile for Outisde corner.

Accessories to be painted or polished by the installer at site as per engineer’s or architect’s approval.

115.96 49 for creating cavity Install GI floor channer 0.55x50mm vertical and horizantal periffery and placed GI Sqm 20 535.00 23 81

stud 0.55x48 at every 600mm center to center, cavity filled by Density of the Glasswool used for

testing was 50mm thick and 48 kgs/m3. Screw the aluminium extruded keel for channelled

woodworks provided by over the lowest and second wooden batten at an on-centre distance of

600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/

Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the

groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue

installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and

progressively installing inside clips into the next keel till the actual height is achieved. Finish off the

edges using wooden moulding of matching colour (provided by others). Installation to be carried out

by Knauf Ceiling Solutions Trained Installation team & Installation should be carried out as per Knauf

Ceiling Solutions recommended procedure.

Providing and fixing 6 mm overall thick PET yarn carpet 500 x 500 mm tile with PVC backing, 3 mm

pile thick, 5200 density fix with existing sub-floors - vitrified tiles, ceramic tiles, natural stone and

epoxy by gloove in line and level, require sub floor levelling should included, shade approve by

incharge architect. (ARMSTRONG / WELSPUN / PERGO)

2.00 51 Providing and Suppying Electric geyser for capacity of 3 Litre in Rest House of Colony. Nos. 2 886.00 5

Total Rs. 1 34 98

I/We am/are willing to carry out the work at……….% above/below percent (Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words