Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.2 LAdmitted-Fee/PreQual/Technical/Finance | -10.10% | ₹3.2 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹4.6 L+₹1.4 L (44.4%)Admitted-Fee/PreQual/Technical/Finance | +10.00% | ₹4.6 L+₹1.4 L (44.4%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹4.7 L+₹1.6 L (49.6%)Admitted-Fee/PreQual/Technical/Finance AT KHAS KAJORA COLLIERY P O KAJORA GRAM DIST PASCHIM BARDHAMAN WEST BENGAL 713338 | PASCHIM BARDHAMAN | WEST BENGAL | 713338 | +14.00% | ₹4.7 L+₹1.6 L (49.6%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹4.8 L+₹1.7 L (52.3%)Admitted-Fee/PreQual/Technical/Finance | +16.00% | ₹4.8 L+₹1.7 L (52.3%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.2 L
EMD Value
₹5,200
Closing Date
20 Aug 2026, 9:00 amClosed
ACE Govindpur area
GM office, bilbera sonardih
Water proofing of roof and repairing pump house and Bijli Ghar of KM section under Govindpur Area
2026_BCCL_363401_1
BCCL/AR III/GM/ACE/E-NIT/26-27/ 56/2476-2501
Open Tender
Civil Works - Others
Percentage
28 days
Govindpur area
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,200
22 Aug 2026
11 Aug 2026
22 Aug 2026
11 Aug 2026
20 Aug 2026
11 Aug 2026
11 Aug 2026 - 20 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Civil work | - | - | - | - |
| 3 | Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) | 9.48 | m3 | - | - |
| 4 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per
manufacturer's specifications including appropriate priming coat, preparation of surface,
etc. complete.On concrete work | 194.22 | m3 | - | - |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of s | 5.1 | m3 | - | - |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone
aggregate 40 mm nominal size derived from natural sources). | 1.61 | m3 | 1 | ₹1.61 |
| 7 | Demolishing brick work manually/ by mechanical means including stacking of serviceable
material and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge.In cement mortar | 7.68 | m3 | 1 | ₹7.67 |
| 8 | Brick work with clay flyash FPS Non modular brick of class designation 7.5 in foundation | 16.53 | m3 | - | - |
| 9 | 12 mm cement plaster of mix :
1:6 (1 cement: 6 fine sand) | 195.24 | m2 | - | - |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7
microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.
Sheet should have protective guard film of 25 microns minimum to avoid scratches during
transportation and should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size
(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved
surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and
shape wherever required. | 44.24 | m2 | - | - |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed
work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete | 143.66 | kg | - | - |
stage.html
html • 0.02 MB
finance_376320.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.60 MB
BOQ_376320.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .