GER-15/2021-22 Rewiring to certain bldgs at Keri Galuthi Gambhir Dalogra Sarol and Zone B at Rajouri

Amount

Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid PVC casing & caping of 20mm width (Medium grage double locking system) complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit)

Description all as per srl item No. 2 above but for socket outlet 5 Amps on independent board complete all as specified and directed.

Description all as per srl item No. 2 above but for socket out 5 Amps on same board complete all as specified and directed.

Description all as per Serial item No 2 above but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.

S&F for switch piano flush type single pole one way 5 amps 240 volts complete all as specified and directed.

S&F for switch socket combination 2 in 1, 5 pin, 6 amp flush type complete all as specified and directed.

S&F for bell push flush type single pole one way 5 amps 240 volts complete all as specified and directed.

S&F for socket 5 amps 5 pin, 2 in 1, flush type, 230 volts complete all as specified and directed.

S&F for switch socket combination 2 in 1, 5 pin, 15 amp flush type complete all as specified and directed.

S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals complete all as specified and directed.

S&F for fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

Taking down ceiling fan of any sweep of any make from its existing position, after disconnectioning electric conection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pin, cater pins, coupling bolt, capacitor holder, terminal adopto, screws nuts and washers etc and replacement of spare parts/accessories such as ball bearings gun metal bushes capacitor canopy top and bottom, shakle clip assembly, rewinding of fan motor, painting and including hanging fixing back in existing location and making cable connection and testing for its satisfactory performance complete including wirting of fan number with white paint all as specified and directed.

Taking down exhaust fan of any sweep of any make from its existing position, after disconnectioning electric conection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pin, cater pins, coupling bolt, capacitor holder, terminal adopto, screws nuts and washers etc and replacement of spare parts/accessories such as ball bearings gun metal bushes capacitor canopy top and bottom, shakle clip assembly, rewinding of fan motor, painting and including hanging fixing back in existing location and making cable connection and testing for its satisfactory performance complete including wirting of fan number with white paint all as specified and directed.

S&F in repairs High efficacy 2'x2' recess LED flat panel light 36W LED 6000K edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size (Make :-Havells, Cat part VENUSNEOHE2X2R36WLED840PI or equivalant of Crompton Greaves /Philips

S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electricaly using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed. (Make :- Havells Cat part No HEXAFT10WLED857SSYMBOPC or equivalant of Crompton Greaves /Philips)

M&L for LED Tube light fitting, complete with 1x 20 watts, 4 feet. Decorative LED lighting fixture with Ultra bright, glass shell or PVC, glare free, wide angle, double side connection retofit LED tube with G13 lamp holders, environmental friendly, energy efficient including 20W LED tube with double side connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete as in repair all as specified and directed. (Make :- Havells cat No CRYSTAL1213T8DSTL20WLED865SGL for LED tube light and for fittings REGALBATTENT8UPTO2X22WDSBSWH (Universal batten or equivalent in Crompton/Philips

M&L for LED Tube light fitting, 1x 9 watts, complete with 2 feet Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete as in repair all as required at site or directed. (Make :- Havells, Cat part No LUMILINEBS9WLED865SPCWH or equivalent of Crompton/Philips.

M&L for buzzer Ding Dong AC, 230 Volts, single pole complete as in repair all as specified and directed.

M&L for sheet metal enclosure MCB distribution board (double door), triple pole and neutral 415 volts with IP-66 protection single phase 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

S&F for sheet metal enclosure with socket plug top and MCBs single pole with one MCB 240 volts 20 amps complete all as specified and directed.

M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

M&L for MCB single pole & neutral 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

M&L for MCB single pole and neutral 240 volts any rating from 40 to 63 amps, with rupturing capacity 10 KA,including providing thimble for out going cablescomplete all as specified and directed.

M&L for MCB triple pole and neutral 415 volts any rating from 63 Amp with ruptring capacity 25 KA, including providing thimble for out going cables complete all as specified and directed.

Supply, Laying, connecting and testing in replacement submain wiring wire with two single core PVC insulated unsheathed, FRLS flexible copper conductor multi strand cable of size 4 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor multi strand cable green colour of size 4 Sqmm as earth lead in & including PVC non metallic rigid conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site or directed after taking down old unserviceable sub main wiring including earth conductor etc and removing from the site. Note:- Two runs of copper conductor of required size and one run of PVC conduit and accessories are measured as one unit.

Supply, Laying, connecting and testing in replacement submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor multi strand cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor multi strand cable green colour of size 6.0 Sqmm as earth lead in & including PVC non metallic rigid conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. after taking down old unserviceable sub main wiring including earth conductor etc and removing from the site. Note:- Two runs of copper conductor of required size and one run of PVC conduit and accessories are measured as one unit.

Supply, Laying, connecting and testing in replacement of service cable of size 16 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular complete all as specified and directed.

Supply, Laying, connecting and testing in replacement of service cable of size 10 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular complete all as specified and directed.

Supply and fixing in replacement Lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 9 watt complete all as specified and directed.

Supply and fixing in replacement energy saving and environmental friendly long life LED Bldg security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 and electronic driver of 30W LED 5700K and making necessary connections including street light bracket made out of 25 mm dia GI tubing medium grade made to shape 1.2 mtr long duly painted with synthetic aluminium paint over a coat of primer incl MS clamps and back plates fabricated from steel section including nuts, bolts, washers 02 set complete as in repairs all as specified and directed. (Make:- Havells, Cat Part No. ENDURAPEARLSL30WLED757SASYTOPCMP or equivlaent of crompton greaves/Philips

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

MAMTA ENTERPRISES

M/S NARAYAN CONSTRUCTION

M/s K K CONSTRUCTION

M/S Chib Engineers

BINDRA ENGINEERS AND CO

M/S PARSHOTAM KUMAR GUPTA