Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.7 L+₹2,476.13 (0.68%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹3.7 L+₹4,277.09 (1.17%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹3.7 L+₹5,367.81 (1.47%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹3.8 L+₹10,378.68 (2.84%)Rejected-Finance | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | SalimVM L2 | CUBIQ ENGINEERING L7 | SP CONSTRUCTIONS L3 | Sreekumar C S L6 | JAYAKRISHNAN P K L1 | Devadut S P L5 | Muhammed Saheed L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00LIBRARY MAINTAINANCE | ||||||||||
| 1.00 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 105 | sqm | 80 ₹8,400 | 75 ₹7,875 Lowest | 99 ₹10,395 | 201.72 ₹21,180.6 | 187.82 ₹19,721.1 | 80 ₹8,400 | 200 ₹21,000 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 201.6 | sqm | 800 ₹1,61,280 | 899 ₹1,81,238.4 | 819 ₹1,65,110.4 | 782.34 ₹1,57,719.74 | 728.45 ₹1,46,855.52 Lowest | 774.5 ₹1,56,139.2 | 760 ₹1,53,216 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 866.52 | kg | 150 ₹1,29,978 Lowest | 159 ₹1,37,776.68 | 183 ₹1,58,573.16 | 173.76 ₹1,50,566.52 | 161.79 ₹1,40,194.27 | 174.87 ₹1,51,528.35 | 170 ₹1,47,308.4 |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 172.8 | kg | 170 ₹29,376 | 155 ₹26,784 | 163 ₹28,166.4 | 165.75 ₹28,641.6 | 154.33 ₹26,668.22 | 170 ₹29,376 | 74 ₹12,787.2 Lowest |
| 1.00 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 40.8 | kg | 800 ₹32,640 | 550 ₹22,440 | 100 ₹4,080 Lowest | 785.87 ₹32,063.5 | 702.13 ₹28,646.9 | 650 ₹26,520 | 800 ₹32,640 |
| 1.01 | OD439413/2025-2026:Providing & fixing M S sheets of 2 mm thickness including fixing by welding or riveting, | 1.5 | sqm | 3,000 ₹4,500 | 2,100 ₹3,150 | 1,500 ₹2,250 | 1,514.93 ₹2,272.4 | 1,410.57 ₹2,115.86 Lowest | 1,630 ₹2,445 | 1,630.72 ₹2,446.08 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 200 | per Letter per cm height | 8 ₹1,600 | 100 ₹20,000 | 5 ₹1,000 Lowest | 5.8 ₹1,160 | 5.48 ₹1,096 | 6.34 ₹1,268 | 6.34 ₹1,268 |
Tender Value
₹4.2 L
EMD Value
₹10,593
Closing Date
3 Jul 2026, 4:00 pmClosed
Assistant engineer
office of the Assistant Executive engineer
Annual Plan-EBP 231/26-KUDAMALOOR SETHUPARVATHY LIBRARY BASIC FACILITIES-General Civil Work
2026_LSGD_857628_1
LSGD/CELSGD/6922/2026-2027
Open Tender
Civil Works - Others
Item Rate
240 days
Ettumanoor
Please refer Tender documents.
8 documents required · 8 mandatory
₹935
Yes
₹10,593
Yes
30 Sept 2026
25 Jun 2026
4 Jul 2026
25 Jun 2026
3 Jul 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1LIBRARY MAINTAINANCE | |||||
| 1.001 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | - | sqm | - | - |
| 1.002 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.004 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.005 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 1 | kg | - | - |
| 1.006 | OD439413/2025-2026:Providing & fixing M S sheets of 2 mm thickness including fixing by welding or riveting, | - | sqm | - | - |
| 1.007 | 13.71:Lettering with black Japan pint of approved brand and manufacture | - | per Letter per cm height | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1449737.xls
BOQ • 0.30 MB
viewnit.pdf
Tender Documents • 0.02 MB
viewsbd.pdf
Tender Documents • 2.27 MB
viewsbd-aff.pdf
Tender Documents • 0.01 MB
viewsbdepay.pdf
Tender Documents • 0.01 MB
viewsbd-fot.pdf
Tender Documents • 0.01 MB
viewsbdip.pdf
Tender Documents • 0.01 MB
viewsbd-pa.pdf
Tender Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .