Civil Work

Name of Work :- Construction of Colour & Repairing Of Taluka

Panchayat Bhavan At. Padra Village Ta. Padra Dist. Vadodara

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Civil works items

1 Demolition of Brick work and stone masonry including stacking of 0.83 Cum 549.49

serviceable materilas and disposal of unserviceable materials with all

2 Dismentaling tiled of stone floors laid in mortar including stacking of 239.71 Cum 47.94

serviceable materilas and disposal of unserviceable materials with all

3 Removing dry oil bound distemper by a washing and scraping and 3494.78 Cum 11.26

sand papering the wall surface smooth including necessary repair to

4 Scraping oil paint from steel and other metal surface and making 108.00 Cum 50.55

thesurface even (with Hand Scraping.)

5 Anti-Termite System : Providing and laying of permanent piping 230.95 Sq.m. 134.33

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in

the tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at

the entire periphery of the building and at internal network of building

at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout) & ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum

mm ID leading into junction box and the loops shall terminate in

junction boxes & test every junction during injecting chemicals for

termite control treatment.

The anti termite chemical Imidacloprid 30.5% SC mix as per IS-6313

(part III) shall be injected by the pressure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The

contractor shall submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-Charge with bond of

year warranty.(i)Anti Termite chemical injected area (Chemical

injecting incl. labour cost)

6 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm(average) 250.59 Sq.m. 1451.16

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on newsurface

or fixing on existing flooring by adhesive material

includingdismentaling of existing flooring and jointed with color cement

slurryincluding finised with flush pointing & cleaning the surface

7 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , 24'' x 24'' 40.99 Sq.m. 1169.98

in skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3 coarse sand) and jointed with white cement slurry.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

8 Providing & fixing 40 mm thick Single shutter flush door solid core 10.71 Sq.m. 7425.52

finished with both side 1 mm thick lamination both side like

'NOVAPAN 'or equivalent of natural wood grain shade as approved by

this office having telephone black granite 18 mm thick frame with

double stone as per the instruction of Engineer in charge with

necessary SS hinges and fixtures etc. complete.

9 Providing & fixing 35 mm thick Single shutter flush door solid core 45.36 Sq.m. 7015.46

finished with both side 1 mm thick laminationboth side like 'NOVAPAN

'or equivalent, of natural wood grain shade as approved by this office

having telephone black granite 18 mm thick frame with double stone

including fixed ventilation above lintel level as per drawing and as per

the instruction of Engineer in charge with necessary SS hinges and

fixtures etc. complete.

10 Labour Work For Entry Door Repairing (Cutting & 2.00 No. 773.66

Fixing Teak wood Beading patti).

11 Providing and fixing window having extruded aluminum colour 16.20 Sq.m. 4129.89

anodized section frame main outer size 95mm x 24mm x 1.17mm (@

Wt. 0.738 Kg/mt), horizontal three track member size 92mm x

31.75mm x 1.30mm (@ Wt. 1.07 Kg/mt), vertical member of size

92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (@ Wt. of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt. of

0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing including granite frame as per

details etc. complete.

12 Providing and fixing louvered type ventilators with powder coated 0.36 Sq.m. 13733.98

aluminum fittings and fixtures and Blur glass fixing to adjustable

louvers and black granite frame as per details and executed as per

directed by Engineer in charge.

13 Brick work using common burnt clay building bricks having 39.61 Cum. 4396.56

crushingstrength not less than 35 kg./Sq.Cm. in superstructure above mt

plinth level upto floor two level in CementMortar 1:6 (1- Cement : 6 -

fine sand)(B) Conventional

14 20mm thick sand faced cement plaster on walls upto height 10 250.42 Sq.m. 397.05

metresabove ground level consisting of 12mm thick backing coat of

C.M. 1:3(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1-sand) etc. Including two coat waterproof cement paint

15 Applying two coats of Birla or Asian acrylic lappy (R & B SOR 2023- 2450.60 Sq.m. 40.59

24, Item No.) and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. For wall

16 Applying two coats of Birla or Asian acrylic lappy (R & B SOR 2023- 1188.01 Sq.m. 42.72

24, Item No.) and two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. For ceiling

17 Wall painting two coats with plastic emulsion paint of approved brand 3638.61 Sq.m. 80.87

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

18 Finishing wall with weather proof exterior emulsionpaint on wall 250.42 Sq.m. 117.40

surface (two coats) to give an requiredshape even shade after

thoroughly brushing the surfaceto remove all dirt, and remains of

loose powderedmaterials.etc complete

19 Providing All Wall Surface with water proofing cement paint of 1351.35 Sq.m. 32.29

approved brand and specification as per manufacture.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

20 Painting one coats (excluding priming coat) on previously painted 129.60 Sq.m. 56.59

steeland other metal surface with enamel paint, brushing to give an

including cleaning the surface of all dirt, dust and other foreign matter.

21 Painting two coats (excluding priming coat) on new steel and 129.60 Sq.m. 90.00

othermetal surface with enamel paint, brushing, interior to give an

including cleaning the surface an even shade including cleanicnthe

surface of all dirt, dust and other foreign matter.

22 Providing laying and jointing in true line and level 50mm dia.U.P.V.C. 15.00 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings asapproved by

Engineer In Charge. Pipe shall be fixed on the wallwith the help of

23 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 20.00 Sq.m. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

24 Providing and fixing concealed center point to wall ceiling & floor 10.00 Sq.m. 253.82

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and floor etc. complete.

25 Providing, laying and jointing in true line and level I.S.I. mark 110mm 8.00 Rmt. 856.03

diameter U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992

with one end plain and other end socketed with rubbering & fitting

confirming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the size 110mm

diameter x 149mm length x 145mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary

fitting such as bends, shoes etc. including testing of pipe and joints

and jointed with adhesive solvent cement including cost of all

26 Providing and fixing screw down bib taps of following size (A) Brass 4.00 No. 186.83

chromium plated screw down bib tap (i) 15mm dia. as approved by

Engineer in charge for all floors.

27 Providing and fixing screw down bib taps of following size (A) Brass 2.00 No. 214.81

screw down bib tap polished bright (ii) 20mm dia. as approved by

Engineer in charge for all floors.

28 Providing and fixing pillar tap, capstan head screw down high 1.00 No. 354.69

pressure with screw, shanks and back nuts (B) 20mm dia. as directed

by Engineer in charge.

29 Providing and fixing chromium plated brass half turn flush cock of 2.00 No. 263.77

approved quality including fixing in pipe line etc. complete. (ii) 25mm

dia. as directed by Engineer in charge.

30 Providing and fixing Gun metal check or non return full way wheel 2.00 No. 663.43

valve. 40 mm dia.

31 Providing and fixing Gun metal check or non return full way wheel 2.00 No. 420.63

valve. (C) 25 mm dia.

32 Providing and fixing wash basin with single hole for pillar tap with C.I. 1.00 No. 5909.51

or M.S. brackets painted white including cutting holes and making

good the same but excluding fittings. (A) Vitreous china (ii) Flat Back

washbasin 550 mm x 400mm size. (i) In white colour.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

33 Providing and fixing C.P. brass towel rail complete with C.P. brass 2.00 No. 616.42

brackets fixed to wooden plugs with C.P. brass screws.(B) 600 mm x

34 Providing and fixing C.P. brass shower rose with 15mm or 20mm 1.00 No. 282.16

inlet.(A) 100mm dia. each

35 Providing and fixing 600mm x 450mm bevelled edge mirror of superior 1.00 No. 854.58

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden plug with C.P. brass screws and washers.

36 Providing and laying wash down water closet (European type Wall 1.00 No. 10261.60

hung W.C. pan) Florentine series FLS-WHT 0111B including

providing and fixing metropole flush cock seat cover, jet wash etc.

complete unit of jaquar branch (or equivalent) including installing and

fitting as per manufacturers standards by skilled trained plumber

including testing etc. complete quality and brand as approved by

Engineer in charge.

37 Providing, laying and jointing in true line and level I.S.I. mark 160mm 15.00 Rmt. 834.38

diameter U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end

plain and other end socketed with rubbering & fitting confirming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160mm diameter x

210mm length x 196mm high at every 2000mm center to center or

shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed

with adhesive solvent cement including cost of all materials.

38 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jail 6.00 No. 572.32

of the following nominal diameter of self cleansing design with C.I.

screwed down of hinged grating including the cost of cutting and

making good the walls. (i) 100mm dia.

39 Providing erecting and fixing double coated Syntex or equivalent PVC 1000.00 Litre 3.95

(I.S.I.) mark water tank of required capacity each with all necessary

fittings & connection etc. comp on terrace.

40 Providing and fixing ball cock of approved quality as directed. (A) 1.00 No. 132.89

Copper metal (i) 25 mm dia.

41 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse 3.28 Cu.mt 3993.11

sand : 6- crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping

42 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work 410.00 Kg. 77.29

including bending, binding and placing in position complete upto floor

43 Providing sock pit of 5.00 Cu.M. Volume including excavating 1.00 No. 3427.65

andfilling brickbats with dry masonry work at top for 45cm.

heightincluding covering the

top with stone including providing vatas in C.M.1:3 with finishing

curing etc. complete as directed.

44 Excavation for foundation upto 1.5 m depth including sorting out and 47.40 Cum. 268.28

stacking of useful materials and disposing off the excavated stuff upto mt

50 Meter lead.(B) Dense or Hard soil

45 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 36.24 Cum. 4086.46

Coarse sand : 4- graded stone aggregates 20 mm nominal size) and mt

curing complete Including cost of formwork But Excluding The Cost Of

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and Mass concrete .

46 Providing and fixing sheet glass, selected quality (Type-C) bedded inR 9.00 Sq.m. 1217.56

& B SOR 2023-24, Item No. and fixed with wooden beading including

of woodenbeadings of first class teakwood and necessary cutting of

glass. (2) 6mm thick.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

47 Providing and Fixing 6 mm thick Lexan Polycarbonate multi 10.00 Sq.m. 1441.90

wallroofing sheet fixed with hilti screw and rubber silicon sealer

andalluminium strip of size 50 x 3 mm etc complete as directed

byEngineer in charge.

48 Structural steel work ( Confirming to IS 4923-1997) riveted,bolted or 40.00 Kg. 131.15

welded in builtup for all type sections, in framedwork, including cutting,

hoisting, fixing in position andapplying a priming coat of approved

steel primer allcomplete as per the structural designs and directions

ofEngineer in charge.Column ( 122 x 61 x 3.6mm )

i.e. Rs. Twenty Lakh Seventy Six Thousand Eight Hundred Thirty Seven Rupya And Seventeen paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Executive Engineer

Panchayat (R & B) Sub Division, Officer Panchayat (R & B) Division,

Padra Panchayat (R & B) Division, Vadodara