Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC 23 8 SANJAY COLONY AKHNOOR 181201 JAMMU KASHMIR | AKHNOOR | JAMMU | JAMMU KASHMIR | 181201 | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹32.9 L+₹2.4 L (7.80%)Rejected-Finance | L2 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 61977.00 | |
| 3 | L3₹35.0 L+₹4.5 L (14.8%)Rejected-Finance | L3 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 61977.00 | |
| 4 | L4₹36.4 L+₹5.9 L (19.2%)Rejected-Finance R O NAUSHERA DISTT RAJOURI J K 185151 | NAUSHERA | RAJOURI | JAMMU AND KASHMIR | 185151 | L4 | Rejected-Finance Other than L1 After deducting schedule of credit Rs 61977.00 | |
| 5 | Rejected-Technical 00 KAMALWAGANJA ROAD NEAR HANUMAN MANDIR HARINAGAR SHIV PURAM PHASE 1 HALDWANI NAINITAL UTTARAKHAND 263139 | NAINITAL | UTTARAKHAND | 263139 | - | Rejected-Technical Not Meeting eligible criteria |
Tender Value
₹40.9 L
EMD Value
₹81,700
Closing Date
27 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH AKHNOOR
GE NORTH AKHNOOR PIN 181201 CO 56 APO
SPL REPAIR TO BLDG NO P23 P24 OF INF BN BLDG NO P8 P21 P27 OF INF BDE SIG COY BLDG NO T25 OF 4 DOGRA T27 OF 61 RR BN BLDG NO T5 T11 OF MES INCLUDING PROVN OF DRAINAGE NEAR BLDG NO T96 AT SUNDERBANI UNDER GE N AKHNOOR
2022_MES_554893_1
GE(N)/AKH-61/2022-23
Open Tender
Civil Works
Item Rate
180 days
SUNDERBANI
Class D Cat a i b i
8 documents required · 8 mandatory
₹500
Yes
GE NORTH AKHNOOR
₹81,700
Yes
28 Feb 2023
29 Sept 2022
29 Oct 2022
29 Sept 2022
27 Oct 2022
13 Oct 2022
Amount
Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.
M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement with using water proofing compound.(WPC shall be measured and paid seperately).
M&L for rendering 15mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.
Supply only Integral waterproofing compound.
M&L 5mm thick cement plaster in cm 1:4 on ceiling other than fair face, finish over all as spdf and directed.
Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0kg of cement per sq. metre
M&L for 40mm thick PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in roof padding of roof slab in slope finished surface even and smooth without using extra cement complete all as specified and directed.
Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.50 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membrane. (c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. Note : (i) Roof treatment work shall be carried out through approved manufacturers only. (ii) If Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions. (iii) Covered fillet in PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate of required radius shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6).
Preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified.
M&L for preparation of new/old treated surfaces and applyTwo coat of oil bound distemper to walls over one coat of chalk whiting. all as spd & directed.
M&L for preparation of newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Dismantling brick work or stone boulder masonry built in CM including all quoins arches etc., but excluding ashlar masonry all as specified.
M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete.
M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 but except stones.
Brick work with Sub Class ‘B’ burnt bricks (Old size bricks) straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6.all as sped & directed.
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) ,removing serviceable tiles to store and rubbish off the premises as spedf directed.
M&L for Glazed ceramic colour tiles in vertical surface 300x200x7 mm thick set and joined in neat cement slurry and pointed in white or colour to match the surfcee, including 10mm thick cement plaster in CM 1:4 as backing to recive tile all as spd & directed.
Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 all as spd & directed.
Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings. all as spd & directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed.
S&F 150mm aluminium handle cast type anodised fixed complete all as specified and directed.
S&F 200 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F PVC(SWR) pipes double socketed,in any length with rubber rings joints,laid in trenches or in floors of 75mm bore
S&/F butt hinge medium weight 100 mm long all as spd and directed.
S&F in repair Vitreous china, urinal, half stall type, white (back or corner wall type), complete including waste pipe,coupling and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe all as spd and directed.
PVC connections 15mm size with PTMT nuts of length 300/450mm.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).
S&F in repair Vitreous china, squatting pan, Orissa pattern, size 580x440mm white with integral foot rests with fixing components like P/S trap,seat cover,flushing cistern etc all as spd & directed.
S&F in repair Wash down water closet (Pedestal pattern) with seat cover, complete fixed in repair and making good to floor all as spd & directed.
S&F Vitreous china, wash hand basin (WHB) flat back size 630x450mm including fancy type chromium plated 15mm pillar tap,brass chromium plated waste fittings , brackets all as spd & directed.
S&F in repairs PVC 10 ltr valveless, syphonic action type, flushing cistern, low level white with inlet ball valve, float and handle including brackets pvc conn 450 mm all as spd & direted.
S&F CI Traps ‘P’ or ‘S’ of 100mm
Concrete bed as in cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to 150mm pipes incl packing under and haunching against the sides of pipes after they are laid and tested for following description
S&F 150 mm dia Salt glazed stoneware drain pipes grade A. all as spd & directed.
S&F 100mm cast iron sanitary connection socket to fit WC out-let
100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls
S&F 100 mm Cast iron cowls
100mm CI (Cast Iron) Bends (any radius),diminishing pieces or tapers (larger bore measured) fitted with oval access door
S&F Angle/stop cock valve of CP any colour high pressure screwed for iron pipe of dia 15 mm all as spd and directed.
S&F in replacement; steel chromium plated round grating 100mm dia, fixed in position in cement mortar (1:3) complete all as specified.
M&L for Dismantling water tanks exc 250 lt and n. exc 500 ltr and removing to store
S&F Rotational moulded polyethylene water storage tanks 1000ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F in repair 15mm bore bib tap cast copper alloy fancy type chromium plated with long body crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
S&F Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repair 15mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 20mm bore float valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.
S&F water tubing 15mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls(including cutting chases in existing stone masonry walls), ceiling or laid in floors including taking down old complete all as spd & directed.
S & F for 20 mm bore galvanised steel tubing, medium grade with all fittings, fixed to walls and ceiling or laid in floors including taking down old complete all as spfd & directed.
M&L for providing Cement concrete in foundations, filling and mass concrete type D2 1:4:8 with 40 mm graded aggregate all as spd and directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and red/yellow colour pigment all as spd and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation as sand cushioning 25mm thick all as spd and directed.
Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete
Providing cement concrete type C-2, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick , 75cm wide as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).
M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required
Forming letters, figures etc. by cutting 'V grooves in new lime, cement-lime or cement plaster (per cm of height)
Rein forced cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate ) as in slabs supported on walls,beams and columns in Floor, roofs,landings,balconies,canopies,shelves,in landings, cover slabs (for man holes etc. deck slabs and in similar works all as specified.
TMT Bars , 10mm dia and over cut to length , bent to shape reqd including cranking bending and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.
TMT Bars , 6 to 8mm dia over cut to length , bent to shape reqd including cranking bending and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .
M&L for washing, rubbing down and stopping of old distempered surfaces and applying two coat of distemper oil emulsion to walls complete all as specified and directed.
M&L for preparing plastered surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coas of cement based paint.
Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified.
25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub floor under tiles, all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement
Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes
M&L for marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white
M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.
Dismantling plain or corrugated steel sheeting, any guage, thickness, roof covering all as specified and directed.
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge all as specified and directed by Engr-In-Charge.
ditto as per item Sr No 79 above here but plain sheets for ridge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F Rolled mild steel section as in main and cross beams, hip and jack,rafters, purlins, where connected to common, rafters and running rails and guiders for sliding doors: fixed with angle cleats or other connecting plates conforming to grade Fe410-W (Gde E-250) quality 'A' all as specified
S&F Mild steel flat iron for wind ties for roof including securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to Fe-210 Gde E-165.
S&F for gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes, without any attachement.
S&F mild steel joist channel angle or tee sections fixed independently without connected plates etc of grade fe-410-0 or fe-310-0.
S & F for M S screw bolts (machine made ) with hexagonal or square head at one end and other screwed the other , each screwed end to be fitted with washers and nut,n. exc 5cm long & dia 5 to 10mm.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.incl one coat of priming complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as spd.
M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
All as per item srl No 89 above but glazed and skeleton shutter with sash bar for glass/wire gauge.
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coat of synthetic enamel paint complete all as specified.
M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.
Steel windows or ventilators,fixed type(box type) factory made with double shutter(wire gaugeed shutter and glass/glazzed shutter,wire cloth and glass pane shall be measured and paid separately of size 79mmx39mm,16 gauge rectangular tubular frame with side hung.)with glazing bars,including a shop coat red oxide of zinc chrome primer, all as specified making good.
All as per srl item No 93 above but without glazing bar.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0
M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.
M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.
S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .
S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.
M&L for Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc fixed in repairs all as spd and directed.
Surface dressing n exc 15 cm deep in any type of soil all as spd and directed.
M&L for 50mm sand filling under floors or in foundation including watering and consolidation all as spd and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade any shape and size with grey cement and pigment confirming to IS 15658-2006. all as spd & directed.
M&L Providing Cement concrete Type B1 1:2:4 (20mm graded aggregate) as in,bed block, copings and levelling concrete slightly rounded or chamfered angles and throating all as spd and directed.
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
Dismatling timber scantling under 40 Sq cm in section , fillets, rails, post, rafter, purlin, etc
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match all as spd & directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as spd.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for .
M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade any shape and size with grey cement and pigment confirming to IS 15658-2006. all as spd & directed.
M&L for dismatling timber scantling 40 Sq cm and over in section Unframed work, in any position
M&L Dismantling Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete.
Extra over stone walling for hammer dressing to face stones and dressing of facebeds and joints as specified of random rubble walling, for lime or sand stone, and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm.
Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete painted one shop coat of zinc chromate primer paint(including preparation ofsurface) at Contractor’s workshop before fabrication
S&F mild steel, plain, black sheet in hearths;covering to door shut ters; covering to door chowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required
S&F 100mm aluminium handle cast type anodised fixed complete all as specified and directed.
S&F 150 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil
M&L for 600mm dia, reinforeced concrete pipes, class NP2, laid and jointed complete with collars
M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 150 mm thick watered and well rammed to true surface
M&L 100mm thick cement concrete 1:2:4, type B2 (using 40 mm graded agg) as in path etc finished even and smooth w/o using extra cement
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.
M&L for brickwork with subclass'b' old size bricks,straight or curved on plan exc 6m mean radius built in cement sand mortar 1:4 complete all as spd
M&L rendering 15 mm thick in cement and sand mortar 1;4 on fair faces of brick or cement concrete surfaces incl finishing the surface even and smooth without using extra cement complete all as specified
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Casing Caping 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (a) One light point/fan /bell point controlled by one switch. Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
All as per item no 132 above but One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
All as per item no 132 above butOne 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Casing Caping/Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (a) One 15 amps power socket outlet point controlled by one 16 amps switch on independent board.Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
S & F modular type switch 6 Amps , single pole, 1 way, 1 module, 240V, ISI Marked Complete all as specified and directed. Make Indoasian Glint, Crabtree, Anchor
S & F modular type switch 16 Amps , single pole, 1 way, 1 module, 240V, ISI Marked Complete all as specified and directed. Make Indoasian Glint, Crabtree, Anchor
Supply & fixing modular type socket 6 Amps -2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed Make Indoasian Glint, Crabtree, Anchor
Supply & fixing modular type socket 6 A/16 Amps -2/3 Pin combined shuttered socket 2 module 240V AC ISI Marked Complete all as specified and directed Make Indoasian Glint, Crabtree, Anchor
S&F in replacement Lamp holder, insulated body, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified & directed.
S&F Energy saving LED lamps 7 Watts, 230 volts, 50 HZ, 0.95 PF. complete all as specified and directed. Make: Havells Cat Part No. LHLDERHEMD8X007 or equivalent in Philips/ Crompton/ Bajaj
S&F Energy saving 1x9W/ 1x10W LED bulk head luminaires, IP-65, oval shape, surface mounted with all other accessories prewired and making connections with copper flexible twisted twin cord of appropriate gauge and length, 230v, 50Hz complete all as specified & directed. Make. Havells, Cat Part No. RUGBYNEONFT10WLED760SSYMBOPC or equivalent in Philips/ Crompton/ Bajaj
S&F ceiling rose surface bakelite 65x50mm, two or three terminal complete all as specified & directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet 10W 220 Volt AC decorative type with driver, Holder & LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F LED light fitting 1x20W, 220V, AC decorative box type with driver, Holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fix exhaust fan single phase metal body, AC 230 Volt, 50 Hz of size 300mm sweep with louvers shouter complete with all accessories including connecting up from ceiling rose to motor all as specified and directed. Make- HAVELLS/BAJAJ/ORIENT
Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 6 way 240 V with 200 Amp bus bar including blanking plates where required . Make : Indoasian, Legrand, Schiender, Havells etc.
M & L for of sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with existing surface including taking down of old existing submain cable complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Make of Cable Havells, KEI, Anchor.
Supply & fix MCB SPN 50 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed Make - Legrand, Schiender, Havells etc.
Supply & fix MCB SP 5 to 32 Amps 10 KA,"C" series,AC,240 Volts,50Hz , ISI marked complete all as specified and directed (In accordance with IS/IEC 60898-1) 240 V/, 50 Hz, 10 kA Suitable) complete all as specified and directed. Make : Legrand, Schiender, Havells etc.
S&F water heater storage type electric capacity 25 Ltrs BEE 5 Star rated all as specified and directed by Engr-in-Charge.
S&F of PVC connection Heavy duty 18'' long 15mm dia with 02 Nos brass check nuts suitable for Hot Water complete all as specified and directed.
S&F stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15mm, complete all as specified and directed by Engineer-in-Charge
S&F 15mm bore steel water tubing "medium grade" galvanised with all fitting and fixed complete to walls and ceiling or laid in floor etc complete as specified and directed by Engineer-in-Charge
Supply, laying and fixing or passing XLPE insulated electric cable (heavy duty) with stranded aluminium conductor, 1100 volts grade, heavy duty cable, cross-sectional area 16 Sqmm x 4 core connected with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipes including taking down old existing unserviceable cable complete all as specified and directed. (Earth work, brick protection and sand cushioning shall be measured and paid for separately) Make POLYCAB, GLOSTER, GRANDLAY
S&F Earthing of galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth not less than 1.5 metre below normal ground level, surrounded on all sides by 150mm thick charcoal & common salt starting from ground below earth plate upto 150mm above GI plate in alternate layers connected to and including earth lead wire 4.0mm (8SWG) by means of steel bolts, nuts, check nuts and washers, test point made of GI strip 40x8mm, 10cm long PCC 1:2:4, type B-1 in pit with precast RCC 1:2:4 type B-1 in cover reinforced with XPM not less than 4 Kg per Sqm with 15mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal, dust, salt, all as shown in electrical plate No 5 of SSR Part-I (2009) including taking down old existing earthing complete with necessary earth work in any type of soil, removal to a distance not exceeding 50 mtr, including testing on completion, complete all as specified & directed. Note : (a) The cost of earth work, PCC pit of size shown in electrical plate No.3, funnel, watering pipe, wire mesh, charcoal, dust, common salt, 20mm bore medium grade watering pipe & 15mm bore light grade GI pipe as protection to earth lead wire etc shall be deemed included in the unit rate for earthing. (b) After completion, during testing, if the earth resistance equal or less 2 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained.
Supply & fix fan regulator modular type electronic, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed. Make Indoasian Glint, Crabtree, Anchor
Supply and fixing ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) incl taking down existing and deposit with MES all as specified and directed.
S&F inverter based LED tube light fitting, 22/24 watt, indoor decorative high lumen batten and connecting up with twin core twisted flexible copper wire complete all as specified and directed.
M&L for LED street light/ fitting of capacity 24 watt with LED bulb having high pressure die cast aluminium housing with sealed toughened glass cover suitable for pole mounting, light source SMD LED array with lens of efficiency >120lm/w, operating voltage range 120-280 volt, power factor >0.95 weather protection IP66 including suitable size copper cable three core for connection all as specified and directed.
Supply and fixing LED luminaire 600 mm X 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F street light bracket for street light fittings made to shape as directed out of GI Pipe light grade 32mm bore 1.5 mtr long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size complete all as specified and directed.
S&F LED light fitting 1x18W, 220V, AC decorative box type with driver, Holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply & fix and in repair MCB SPN 40 Amps 10 KA,"C" series,AC, 240Volts, 50Hz, ISI marked complete all as specified and directed Make : Legrand, Schiender, Havells etc.
M/s Mool Raj Romesh Chander
BALVINDER SINGH AND SONS
vijay kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .