Prepainted C.G.I. Sheet Roof at Mela Ground Stage at Bhunter JOB NO 2

Amount

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete0.80 mm thick with zinc coating not less than275 gm/m²0.30 cm Projection Both sdies

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.30 cm Projection Both sdies 30+0.30+0.30 = 30.60 & 12.50+0.30+0.30= 13.10/2= 6.55 , 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size

Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per specification. 100 mm spread thickness

VIKAS SAVEL

Oma devi

Abhishek Parwari

Yogesh Sharma

M/s Shivom Engineering and Services/Prop. Abhilash Sharma

rumal singh