PROVISION OF DEFICIENT PARKING SHED HARD STANDING AND BOUNDARY WALL WITH FENCING ALONG WITH ALLIED WORK AT COMMAND RECRUITMENT OFFICE AND SPECIAL REPAIRS TO REPLACEMENT OF OLD ALUMINIUM WIRING WITH COPPER WIRING AT SEAMANSHIP SCHOOL AT NAVAL BASE KOC

Amount

M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering in two coats with 8mm thick in cement mortar 1:4 using WPC over 12mm thick in CM 1:6 on fair faces of block masonry / brick surfaces/concrete surfaces finished even and fair without using extra cement complete all as specified. (WPC will be paid seperately).

M&L for coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25cm thick for well ramming including watering as required complete all as specified and directed

Supply only Integral Liquid Water Proofing Compound

M & L for preparation of newly plastered external wall surfaces and applying two or more coats of weather proof paint over and including priming coat of exterior primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil bound distemper over a coat of primer over and including provision of 1.5mm thick wall care putty complete all as specified and as directed.

M& L for Damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0, applying evenly a tack coat of bitumen 85/25 at the rate of 1.2kg/sqm including cleaning surfaces and applying polythene film 150 micron laid over bitumen coating complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, welded to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

S&F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed.

M & L for Cement concrete Type C2 1:3:6 (40 mm graded stone aggregate) in foundation, filling, mass concrete, posts (including caps and bases) complete all as specified and directed.

M & L for roof trusses (framed or tubular sections) trussed, purlins, crane gantries,pillars, posts, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular pipes or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde-E-165 complete all as specified and directed

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 200mm dia half round or 220mm width rectangular UPVC heavy duty eaves gutter of pressure rating 6 kg/cm2 of approved make including necessary fitting like bend WC/MS clips etc complete all as specified and directed.

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing to walls etc complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soilcomplete all as specified and directed.

M&L for Hardcore(broken stone or boulders) of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size as approved confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement with grey cement and no pigments in floors over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes. Note: Quoted rate shall be inclusive of the screed bed

M&L for cement concrete 1:2:4 type B0, using 12.5mm graded stone aggregate as in kerbs or copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material exc. 250m and not exceeding 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

M&L for cement concrete in foundation type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L for TMT bars (CRS/HCRM/CRM) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for RCC 1:1.5:3 nominal mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

S&F MS Hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., similar work conforming to Fe 290-0 Gde E 165 complete all as specified and directed.

S&F MS galvanised chain link fencing with grid of size 80mm x 80mm with 4mm dia wire (Weight not less than 3.25 Kg/Sqm) including straining bolts, etc. and provision of binding wire fixing to fencing post complete all as specified and directed

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick/concrete/block masonary surfaces complete all specified & directed

M&L for preparing surfaces of new plastered surfaces and applying three coats of white wash including preparation of surfaces complete all specified & directed

Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for cement concrete in foundation type B 2, 1:2:4 (using 40 mm graded stone aggregate) as in filling and mass concrete complete all as specified and directed.

M&L for cement concrete in foundation type B 1, 1:2:4 (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Taking down carefully existig copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, ceiling roses, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed

All as per item No. 42 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.

All as per item No. 42 here-in-before One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item no 42 here in before but One light point controlled by two way switches

All as per item no 42 here in before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size

All as per item No. 42 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable.

All as per item No. 42 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, unsheated FRLSH copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable.

S&F for Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F for Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F for Socket outlet modular type 6A - 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed.

S&F for Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed.

S&F for Bell push modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed.

S&F Switch modular type 6 amps, 1 module single pole two way duly ISI marked, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed

Supply and fixing in replacement of LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F in repair Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed..

S&F of factory made three phase and neutral sheet steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 4 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming MCBs and outgoing MCB the second for protection of MCBs fitted with colour AL bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 415V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified

S&F of Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCCB TP, 125 Amps, 415 volts,rated service short circuit breaking capacity Ics= Icu at 415V ,27 KA duly ISI marked, in DB, complete with connection testing and commissioning all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB TP, 40Amps, 415 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-40 Amps, 240 volts, "C" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

M&L for Sub main wiring with four single core 4x10 Sqmm FRLSH insulated and unsheathed stranded copper conductor alongwith earth wire 10 Sqmm drawn in FRLSH rigid conduit connected to main board complete all as specified and directed (Four runs of cable and one number earth wire and suitable FRLSH conduit shall measured together as unit length).

M&L for Sub main wiring with two single core 2x6 sqmm FRLSH insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLSH rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLSH conduit shall measured together as unit length).

S&F in replacement of ceiling fans, complete with blades, down rods, accessories 230V, 1200mm sweep, with min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current (BLDC) including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to fan of suitable length for giving connection complete all as specified. Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard. Make Atomberg Cat part No. AMEZA/ Havells Cat part No Efficiencia Neo/ Orient Cat part No. Hector 500 BLDC or equivalent model from the list of manufacturers

S&F fixing in repair exhaust fan plastic body heavy duty with louvers complete of sweep size 250mm, 1200 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including suitable size of cutting/opening the wall for fixing and provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust of suitable length for giving connection complete all as specified.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. Provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. Excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

Taking down unserviceable ceiling fan of 1200/1400 mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking/heating up the motor to achieve the proper insulation resistance and re-hanging /refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified and as directed.

S&F in replacement of Factory made three phase and neutral sheet steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 6 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming MCCBs and outgoing MCB the second for protection of MCBs fitted with colour Cu bus bar of capacity 250 Amps, neutral link, earth bar and din rail. suitable for use on 415V, 50Hz supply, partly immersed in wall and making good distrubed surfaces with matching colour, complete all as specified.

Supply and fixing of MCB 4P 40-100 A, 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning

S&F in repairs, SPN Enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, complete all as specified and directed.

Supply & fix in repair surface mounted LED down lighter 2'x2', 36/40 W, 120 Lumen/Watt, 240 Volt all as per specified and directed. Make Philips Cat Part No. RC380B LED 30S-6500 G4 L60 W60 PSD OD or equivalent its equivalent from the approved list of manufacturers

Supply & fixing of air termination vertical type Single pointed aluminium rod made of 12 mm dia and 300 mm long with base plate welded at bottom complete all as specified and directed.

Supply & fixing aluminium strip 25 mm x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

Supply & fixing GI strip 32x6mm buried directly in ground or fixed to walls complete all as specified and directed.

Supply and fixing in replacement of test point terminal block made of gun metal or phosphorus bronze of size 75mm x 75mm x 25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw for fixing the same on wall, including suitable size of coverd MS box of 1.5mm thick complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground level with top edge of the earth plate at a depth not less than 2.25mtr below ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcol dust and common salt filling in alternate layers all around top and bottom and electrode connection by using galvanised iron earth lead strip of size 32 x 6mm flat iron by means of bolts, nuts, check nut and washers made of galvanised iron pipe 20mm bore medium grade for watering with funnel and wire mesh including galvanised iron pipe 40mm bore protection pipe light grade for protection strip upto 3m above ground level (Up to the test points) PCC chambeer in cement concrete (1:3:6) type C-2 and RCC pit cover in M-25 (design mix) complete all as shown in electric plate No-3 of the MES standard schedule of rates (Part-I) of 2009 complete all as specified and testing on completion:- (a) The unit rate shall include for protection pipe, GI water pipe, funnel, wire mesh excavation, RCC pit cover, test point, 32x6mm galvanised strip from top of earth plate upto 5mtr above GL anf if GI protection is less than 5m, no price adjustment shall be made. (b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc. shall be deemed to be included in the unit rate. (c) If the testing result of earth Wk is not been found satisfactory then the contractor shall do other earthing work at his own cost and nothing shall be permissible on the account. (d) Earthing work will be carried out in presence of MES representative.

Taking down carefully existig Aluminium strip / GI strip with saddles and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour removing materials to store for keeping in safe custody for taking credit complete all as specified and directed.

Taking down old Air termination rod complete all as specified and as directed

Taking down old test point complete all as specified and as directed

Bell Builders (BID ID -3358737)

LAKSHMI BUILDERS (BID ID -3361217)

M.J.JOY AND COMPANY (BID ID -3360440)

Kuriako Mathai and company (BID ID -3360393)

Anaswara Constructions (BID ID -3361262)

Vidya constructions (BID ID -3360308)

MS BUILDERS (BID ID -3358415)

K THOMAS AND COMPANY (BID ID -3360587)

SUKU CONSTRUCTIONS (BID ID -3358922)

M/s ANTONY THOMAS AND CO (BID ID -3360786)