Providing Godavari Raw Water to Lord Shiva Statue via Havelock Bridge at Pushkar ghat in RMC.

Supply, installation, testing and commissioning of 30 HP, 3-Phase submersible motor pump set, of approved make, suitable for continuous duty operation, complete with submersible motor, pump, starter/control panel, required cables, accessories, foundation/mounting arrangements, and all labour and materials, including testing for satisfactory performance, as directed by the departmental authorities.

Supply, installation, testing and commissioning of 30 HP, 3-Phase Panel Board, of approved make, suitable for continuous duty operation, complete with main isolator/MCCB, contactor, thermal overload relay, control MCBs, indication lamps, necessary protection and control accessories, incoming and outgoing cable terminations, enclosure with mounting arrangements, and all labour and materials, including testing for satisfactory performance, as directed by the departmental authorities.

Manufacture, supply and delivery of 110mm dia HDPE pipes confirming to IS: 4984-2016 including transportation to any where in A.P., excluding all taxes (Supply upto 90mm dia in Coil & above 90mm dia Straight length ) as per SSR 2025-26 SL. No.16 of Public Health items. (PE-100 Grade)

Laying and jointing of 110mm dia HDPE pipe by joint stictly as per 7634-part-II /1975 as amended from time to time to the absent testing of pipe line to the resumed pressure as per the alignment on ready made trench inclusive of conveyance of pipe from departmental stores etc., complete as per SS.

Supply Delivery and fixing of 110mm HDPE long neck collars confirming to IS standerds including cost and conveyence of all meterials and cost with all taxes and conveyence to work spot etc.complete as per S.S and as directed by the site engineer

Supply Delivery and fixing of 160mm HDPE long neck collars confirming to IS standerds including cost and conveyence of all meterials and cost with all taxes and conveyence to work spot etc.complete as per S.S and as directed by the site engineer

Supply and delivery of 150mm dia Flanges 15mm M.S. Flanges including cost of Bolts, Nuts, Rubber packing ec. Complete and flange thickness confirming to IS:7322-1985 and flange dimensions confirming to IS: 1538-1993 excluding cost of MS specials including cost and conveyance to site etc. complete as per instructions of the Departmental Authorities.

Manufacture ,Supply and delivery of 150mm dia PN 1.6 Mps DI/D/F Gate valves (Soft seated) Resilient seated soft sealing gate valves (siuice valves) with body bonnet of ductile cast iron of grade GGG40/SG400/12 or equivalent grade as per I.S. 3896-Part-2-1985 and sub sequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as per BS5163-89/ISI14846-2000/Din3202 F 4. Allthe valves should be with electrostatic powder coating both in side and out side pocket less bodypassage, Drilled as per IS:1538 as per SSR.

Supply delivery of 150mm dia 1.0 Mpa Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. For 150mm dia 1.0 Mpa

Labour charges for 150mm dia & NRV lowering and keepingin position of CL sluice vales etc. complete as per S.S. and as directed by the site engineer.

Jointing the CL pipes fitting and valves with flanged ends excluding cost of jointing meterials such as Bolts, Nuts, Rubber insertion, white led and including filling with water with a water upto 500 Mtrs ect. Complete as per S.S. For 150mm dia & NRV

Supply and delivery of Rubber packing including conveyance etc. complete, but excluding taxes 6Nos thick etc. complete as directed by the Departmental Authorities.

Supply and delivery of Bolts and Nuts with Double washers including conveyance etc. complete, but excluding taxes (1/2" to 1") etc. complete as directed by the Departmental Authorities.

Erection of motor including fixing, grouting, alignment, insulation, boat swimmers, and all associated labour charges, complete in all respects, as directed by the departmental authorities.

Supply, erection, testing and commissioning of panel board, including all required accessories, incoming and outgoing cable terminations, and provision of skilled electrician for installation, connection, wiring, and testing, along with all labour charges, complete in all respects, as directed by the departmental authorities.

Supply, laying, jointing, testing, and commissioning of 175 mm HDPE slotted pipe of approved make, suitable for drainage/ irrigation/ subsurface applications, including necessary fittings, accessories, excavation, backfilling, and all labour charges, complete in all respects, as directed by the departmental authorities.

Supply and delivery of 16.0 Sqmm 3 core copper Flat Cable Wire of approved standard make including cost and conveyance of all materiais to work spot etc, complete as directed by the site engineer(MAT-05475)

Supply, fabrication, and installation of stainless steel (SS) clamps and supports for motor, piping, and finishing works, including all necessary accessories, fasteners, alignment, and labour charges, complete in all respects, as directed by the departmental authorities.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%

Supply, installation, testing and commissioning of 30 HP, 3-Phase submersible motor pump set, of approved make, suitable for continuous duty operation, complete with submersible motor, pump, starter/control panel, required cables, accessories, foundation/mounting arrangements, and all labour and materials, including testing for satisfactory performance, as directed by the departmental authorities.

Supply, installation, testing and commissioning of 30 HP, 3-Phase Panel Board, of approved make, suitable for continuous duty operation, complete with main isolator/MCCB, contactor, thermal overload relay, control MCBs, indication lamps, necessary protection and control accessories, incoming and outgoing cable terminations, enclosure with mounting arrangements, and all labour and materials, including testing for satisfactory performance, as directed by the departmental authorities.

Manufacture, supply and delivery of 110mm dia HDPE pipes confirming to IS: 4984-2016 including transportation to any where in A.P., excluding all taxes (Supply upto 90mm dia in Coil & above 90mm dia Straight length ) as per SSR 2025-26 SL. No.16 of Public Health items. (PE-100 Grade)

Laying and jointing of 110mm dia HDPE pipe by joint stictly as per 7634-part-II /1975 as amended from time to time to the absent testing of pipe line to the resumed pressure as per the alignment on ready made trench inclusive of conveyance of pipe from departmental stores etc., complete as per SS.

Supply Delivery and fixing of 110mm HDPE long neck collars confirming to IS standerds including cost and conveyence of all meterials and cost with all taxes and conveyence to work spot etc.complete as per S.S and as directed by the site engineer

Supply Delivery and fixing of 160mm HDPE long neck collars confirming to IS standerds including cost and conveyence of all meterials and cost with all taxes and conveyence to work spot etc.complete as per S.S and as directed by the site engineer

Supply and delivery of 150mm dia Flanges 15mm M.S. Flanges including cost of Bolts, Nuts, Rubber packing ec. Complete and flange thickness confirming to IS:7322-1985 and flange dimensions confirming to IS: 1538-1993 excluding cost of MS specials including cost and conveyance to site etc. complete as per instructions of the Departmental Authorities.

Manufacture ,Supply and delivery of 150mm dia PN 1.6 Mps DI/D/F Gate valves (Soft seated) Resilient seated soft sealing gate valves (siuice valves) with body bonnet of ductile cast iron of grade GGG40/SG400/12 or equivalent grade as per I.S. 3896-Part-2-1985 and sub sequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as per BS5163-89/ISI14846-2000/Din3202 F 4. Allthe valves should be with electrostatic powder coating both in side and out side pocket less bodypassage, Drilled as per IS:1538 as per SSR.

Supply delivery of 150mm dia 1.0 Mpa Double Flanged Slant seat Swing Check Valve (NRV) with body and Disc of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with fully encapsulated in Vulcanized EPDM rubber & Fusion bonded Electro Static epoxy powder coating inside and outside color Blue RAL 5005 with Min. Coating thickness of 250 microns. The EPDM rubber & Epoxy rubber & Epoxy powder should conform to W 270 standards (Drinking water application) and face to face dimensions as per EN 558-1 / DIN 3202-F6 / IS 5312 & Flange connections as per IS:1538 excluding all duties, taxes and transportation. For 150mm dia 1.0 Mpa

Labour charges for 150mm dia & NRV lowering and keepingin position of CL sluice vales etc. complete as per S.S. and as directed by the site engineer.

Jointing the CL pipes fitting and valves with flanged ends excluding cost of jointing meterials such as Bolts, Nuts, Rubber insertion, white led and including filling with water with a water upto 500 Mtrs ect. Complete as per S.S. For 150mm dia & NRV

Supply and delivery of Rubber packing including conveyance etc. complete, but excluding taxes 6Nos thick etc. complete as directed by the Departmental Authorities.

Supply and delivery of Bolts and Nuts with Double washers including conveyance etc. complete, but excluding taxes (1/2" to 1") etc. complete as directed by the Departmental Authorities.

Erection of motor including fixing, grouting, alignment, insulation, boat swimmers, and all associated labour charges, complete in all respects, as directed by the departmental authorities.

Supply, erection, testing and commissioning of panel board, including all required accessories, incoming and outgoing cable terminations, and provision of skilled electrician for installation, connection, wiring, and testing, along with all labour charges, complete in all respects, as directed by the departmental authorities.

Supply, laying, jointing, testing, and commissioning of 175 mm HDPE slotted pipe of approved make, suitable for drainage/ irrigation/ subsurface applications, including necessary fittings, accessories, excavation, backfilling, and all labour charges, complete in all respects, as directed by the departmental authorities.

Supply and delivery of 16.0 Sqmm 3 core copper Flat Cable Wire of approved standard make including cost and conveyance of all materiais to work spot etc, complete as directed by the site engineer(MAT-05475)

Supply, fabrication, and installation of stainless steel (SS) clamps and supports for motor, piping, and finishing works, including all necessary accessories, fasteners, alignment, and labour charges, complete in all respects, as directed by the departmental authorities.