STDD 2017-18-Water supply to Koolippara ST Colony in West Eleri Panchayath

Amount

Supply of Materials

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 100mm.

Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

Supply of uPVC Pipe, IS 4985: 2000 , 10kg/cm2, 32mm Dia including specials

Supply of PVC Pipe, 6kg/cm2, 90mm Dia S/E including specials

Supply of PVC Pipe, 10kg/cm2, 90mm Dia. including cost of specials

Supply of PVC Pipe, 10kg/cm2, 110mm Dia. including cost of specials

Supply and installation of lightning protection system as per IE standards

KWA Water connection charges up tp 30m length of sevice main

Supply of pump set at GL tank cum pump house

Supply, erection, testing and commissioning of suitable rating (Fully Automatic starter with air break contact for less than 100 HP and for above 100 HP FCMA starters to be used.) starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. complete.

Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor. considering energy conservation.

Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards.

Supply, erection, testing and commissioning of heavy duty capacitor for the above motors to get a power factor above 0.95 or as desired by the officer in charge. The capacitor shall confirm to IS 2834

Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valves and Non return valves with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump set sluice valve should be in suction as well as delivery sides for easy repair works.- for both the pump connections

Suction and delivery pipe connections - Supply and fitting of suitable size best quality GI/MS pipe of thickness not less than 8mm for a total length of 10 m. suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts IR sheet etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main.- for both the pumps

Bidder Name

Amount

JOSHI(GSTN-NA)

NR RAJEEV(GSTN-NA)

NR RAJEEV

NR RAJEEV

Bidder Name

JOSHI

NR RAJEEV