PROVN OF GUARD ROOM WITH TOILET AND URINAL POINT NR BLDG P264 AND BR WORKS FOR DG SET MH AND SPL REPAIRS TO BLDG P42-44 BC LATRINE AT AHMEDABAD

Amount

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete .

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete.

Excavating in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan & n exc 1.5 m in depth & getting out getting out in soft/loose soil complete

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm in hard /dense soil.

Excavation in post holes (or similar holes) each n exc 0.5 cum eah getting out, returning filling in and ramming earth or broken rubble mixed with each around, in layers n exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete.

Surface dressing n.exe (not exceeding) 15cm deep & getting out in hard /dense soil complete

M&L for Sand filling under floors or in foundations including watering and consolidation complete

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable complete.

Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point complete

Removing excavation material exe. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point complete

M&L for hardcore of guage n. exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with back fill to be measured) complete

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface complete

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete

M&L for plain Cement concrete1:4:8 type D2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete complete

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes complete.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded aggregate) in foundation filling & mass concrete as in post complete.

M&L for PCC 1:3:6 type B 1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete

M&L for Precast cement concrte type B1 1:2:4 using 20mm graded stone agg set in CM (1:6) in cover slabs for manhole and similar articles etc. complete.

M&L for precast cement concrete kerb stones macine pressed factory made PCC 1:3:6 type Co set in CM 1:6 including all necessary earthworks complete. finished fair, jointed complete.

M&L for RCC M-25 (design mix.)Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns; etc; basement slabs; under-reamed piles and mass concrete complete

M&L for RCC M-25 (design Mix) Beams, cantilevers, bressummers; lintels over 1.5m span including chajjas complete

M&L for RCC M-25 (design mix.) as in colomn, pillars, piers, post and struts etc complete

Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds materials/stoppage and complete

Supply only integral water proofing compound ISI Marked complete.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

M&L for brick work with FLY ASH bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

M&L for brick work with FLY ASH bricks built in CM (1:4) straight or curved on plan to any radius in half brick thick walls with old size bricks complete.

M&L for Sub Class 'B' bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required as in protection of cable complete.

M&L for 100x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes ‘per upright’, erected in position and bedded and pointed in lime mortar 1:3 or cement mortar 1:6 (Bolts measured separately) complete

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

M&L for formwork of plywood, timber with steel sheet lining or steel plate stiffened with steel angles, steel pipe scaffolding etc. to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work for Rough finished surfaces of concrete complete.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete.

M&L for Formwork to sides of pillars, posts, structs, piers, columns and stanchions for Rough finished surface of concrete Square, rectangular or polygonal complete.

M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.

S&F for Flush shutters 35mm solid core construction with block board core and plywood face panels, commercial type on both sides complete

S&F for 35 mm thick flush shutter Solid core construction with particle board core and plywood face panels commercial type on both sides complete.

S&F for factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required complete.

S&F for solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884) complete

M&L for Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete

S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

S&F for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

M&L for 125mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete

S&F for Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete

S&F for Butt hinges, Medium weight stainless steel, and fixed 100mm size complete

S&F for 200mm size aluminium anodised, barel tower bolt of extruded section complete.

S&F for 150mm size aluminium anodised, barel tower bolt of extruded section complete.

M&L for 150mm Brass handles, cast type, polished bright complete

S&F for 150mm aluminium alloy handles, fabricated type anodised complete

S&F for four lever Mortice lock of brass, vertical type, size 100 mm complete

S&F in repair tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete.

S&F in repair Towel rail of 600mm long & similar to cat Part No F5011103FG of Cera complete

S&F for SS towel rail & similar to Cat part No BA-40 of Make Prayag complete.

S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all lenth of cover plate 150mm complete.

S&F for Door closer hydraulically of aluminium(extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete

S&F for MS framed brackets of angles or Tees with web and flanges cut to shape, drilled and counter sunk for scre, including bending and welding angles, as necessary, gusset plates, riveting etc n,exc 10 kg each brackets, conforming Fe- 290. Gde -E-165 (brackets over 10 kg each to be measured under structural steel complete.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, exc 22.5 & n.exc 30 cm long and 16 to 20 mm dia complete.

S&F for high strength deformed TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binder, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

S&F for mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250) quality A complete.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; flats fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete

S&F for mild steel rolled sections as in framing for fixing AC boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-W (Gde-E-2500 quality-A complete.

S&F for mild steel angle iron work as in doors or gates of angle guard bar or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) complete

S&F for mild steel tubular rectangular or angle sections as in coloums, posts, purlins rafters beams gasset plate and struts including embedding in concrete, and screwing etc complete Fe-410-W Gde-E-250 quality A complete.

S&F for powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, rubber packing, joining cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.

S&F for aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete.

S&F for pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete.

S&F for pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings cut to length & bent to shape required, fixed using hot dip galvanised, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete.

M&L for 6mm thick AC plain building boards fixed to MS frame as in ceiling complete.

M&L for 1.5mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.

M&L machine cut Kota stone slab 40 mm thick as in partition incl half round moulding over including cutting, rubbing and polishing complete.

S&F for 20 mm thick granite ( of any type) tiles machine cut in vertical at partition of urinal embeded in wall, jointed with CM 1:4 ans pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & rounding to edges of stone slabe complete.

M&L 75 mm thick cement concrete type C2 1:3:6 (40mm grade aggregate) as in plinth protection complete sealing with bitumenous compund complete.

M&L 75 mm thick Cement concrete type D2, 1:4:8 (40mm grade aggregate) as in sub base complete

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6.

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete

M&L for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry & pointed in white or colour cement to match including 10mm thk rendering in CM 1:4 complete.

M&L providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick (M-35 grade) with grey cement and pigment of approved design complete

M&L for Rendering in two layers on other than fair faces of brick work or concrete surfaces 5 mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement over 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete. (WPC measured and paid separately) complete

M&L for Rendering in two layers on fair faces of brick work or concrete surfaces 5 mm thick in CM 1:4 over 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete. .

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of Ceiling concrete surfaces, finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint on over one coat of alkali resistance primer on walls complete

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over a coat of 1 to 2mm (1.5mm average) thick wall care putty and one coat of alkali resistant primer complete.

M&L for preparation of new surfaces of AC sheet and applying three coat of white wash as in ceiling complete

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete.

M&L for Distempering Two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour as per manufacturer's specification complete

M&L preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and apply two coat of synthetic enamel paint over one coat pink primer complete

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.

Taking up or down of 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.

S&F for 15mm bore steel tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.

S&F for Galvanised Steel water tubing 20mm dia bore medium grade, galvanised with & including all tube fitting & Fixed / concealed in walls and ceiling or laid in floors including testing complete

M&L for Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 1000 litres hoisted and placed in posiition on PCC platform & as shown on drawings complete

M&L for Bib tap cast copper alloy with crutch or butterfly handle screwed down, fancy type chromium plated screwed for 15 MM bore iron pipe or brass, ferrule & fixed complete.

M&L for Stop valve, cast copper alloy, chromium plated fancy type handle, screwed down, high pressure with push type handle screwed for 15 mm bore iron pipe and fixed complete.

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete. .

S&F in repairs PTMT square grating 150mm size for trap complete

S&F in repairs PVC connection 600mm long of dia 15mm complete.

S&F in repair PVC connection 600mm long of dia 15mm complete complete.

S&F for cast (Spun cast) iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls/floor etc. dia of pipe 75mm,(Height of Bldg up to 10m) complete

S&F for cast (Spun cast) iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls/ floos etc. dia of pipe 100mm complete.

S&F for cast iron Bends (any radius), diminishing piecs or tapers (larger bore measured) dia 75mm bore of pipe with oval acess door complete.

S&F for Cast iron branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches, dia 75mm complete.

S&F for cast iron branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches, dia 100mm complete.

S&F for cast iron cowls 100mm dia complete

S&F for PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete.

S&F in repairs 75 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete

S&F in repairs 110 mm bore PVC (SWR ) PIPE in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete

M&L in repairs for 100mm dia Cast iron Nahani trap long necked, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete

M&L for concrete cement 1:3:6 type C-2 to drain pipes including packing under and haunching agaainst the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete

M&L for RCC Class NP-2 pipe laid in trenches, jointed 150 mm internal dia of pipes complete.

Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including lime concrete bedding complete.

S&F in repairs Vitreous china urinals, half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with & including 60 mm long brass screw, fixing flush pipe, brass CP grating and union for discharge pipe, PVC telescopic waste pipe of suitable length etc complete.

S&F in repairs PVC valveless 10lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle including brackets and 32 mm dia polyethylene waste pipe complete

S&F for brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe

S&F for Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, pillar taps, PVC connection of suitable length, brackets and cutting for & pinning in ends of brackets etc complete.

S&F for 5.5 mm thick looking mirror size 600 x 450 mm with PVC frame of approved quality & make fixed in position with rawl plug and screws of appropriate size complete.

S&F for chromium plated soap dish & similar to Cat BA-45 of make Prayag complete.

S&F in repairs one-piece EWC (with flushing cistern) floor mounted with dual flushing system & similar to Make Cera Cat Part No S1013108 CAPSTAN complete.

S&F in repair health faucet with one meter tube and hook & similar to Cat BEA-86 of Make Prayag complete

S&F in repair CP toilet paper holder & similar to Cat BA-88 of Make Prayag complete

S&F in repairs table top wash hand basin of min size 500x420x120 rectangular shape & simiar to cat C891M, Imperial 500 of Make Parryware complete

S&F in repairs flat back urinal with integrated wash basin and sensor tap & similar to Cera Cat S4025101 complete

S&F in repairs liquid soap dispenser & similar to Cat F5012111FG complete

S&F in repairs Mirror of size 700x700mm & similar to Cat C897R46 of Parryware complete

S&F in repairs corner glass shelf 300mm & similar to Cat BEA-44 of make Prayag complete

S&F in repair pillar cock with aerator & similar to Cat F1018101FG of Cera complete

S&F in repair 15 mm bore angle cock with flage & similar to Cat 8310 of Make Prayag complete.

S&F in repair 15mm dia brass CP wall mixer with L bend for mixing hot and cold water screwed down for iron pipe and similar to Cat- 8775 of prayag complete

S&F in repairs chromium plated soap dish & similar to Cat BA-05 of make Prayag complete

S&F in repairs chrome comfort flow shower of 230mm dia & similar to Cat T9840A1 of Parryware complete

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sq. mmX 2 Core

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red/Yellow/Blue Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators for One light point controlled by one switch complete

All as described in Item No 141 above but for One Ceiling/Ex/Venti fan point controlled by one switch.

All as described in Item No 141 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as described in Item No 141 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.

All as described as per item No 141 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

S&F for switch piano flush button single pole one way 6 amp complete.

S&F for switch piano flush button single pole one way 16 amp complete.

S&F for socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F for socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F for MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.

S&F for ceiling rose 6 amp, 3 plates polycarbonate body complete.

M&L for earthing with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate and shown in EP-3 of SSR Part-I complete

S&F for hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting up complete.

S&F in replacement LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED 20W building security light/streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection with fixing arrangement and connections & similar to cat LST 20 CDL of make Crompton type complete

S&F for air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete.

S&F for ceiling fans complete with blades,down rods,electronic regulator and accessories, , 230 volts, 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE,five star rated with brushless direct current motor (BLDC) complete

S&F for MCBs Single pole 6 to 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete

S&F for MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete

DMA PROJECTS

TECH SERVE SOLUTIONS