Construction of (R and B)Section office at Brahmagiri in the district of Puri. (Building Work)

Earth work excavation in ordinary soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of engineer-in-charge. up to 1.5m depth

Supplying and filling in foundation and plinth with sand including watering and ramming, poking and compacting including cost, conveyance, royalties, taxes of the materials and cost of all labour, labour cess, T&P etc. required for the work complete as directed by the engineer-in-charge. Ground Floor

Providing and laying Plain Cement Concrete of proportion (1:3:6) using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including the cost of all materials, cost of labour, conveyance, taxes, royalties, loading, unloading, shuttering, centering, curing, labour cess, T&P, etc. all complete as per the direction of engineer-in-charge. Ground Floor

Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated Design Mix Cement Concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement. R.C.C. Foundation and Footing Bases of Columns Mass Concrete Pre-Cast Slab etc. Ground Floor

R.C.C. Grade Beams Ground Floor

RCC Columns & Beams, Roof Beam Ground Floor

RCC Floor and Roof Slab, Landing, Balconie, Projecting Sun shades and Chajja up to 4.3 Mtr Height Ground Floor

Stair Case Ground Floor

Lintel Ground Floor

RCC Columns & Beams, Roof Beam First Floor

RCC Floor and Roof Slab, Landing, Balconie, Projecting Sun shades and Chajja up to 4.3 Mtr Height First Floor

Stair Case First Floor

Lintel First Floor

RCC Columns & Beams, Roof Beam Terrace Floor

RCC Lintel Terrace Floor

Cutting, Straightening coiled or bent up M.S. rods or Tor steel welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). Ground Floor

First Floor

Terrace Floor

Providing Fly-Ash Brick masonry work in F&P using Fly-Ash Bricks of size 250mm x 120mm x80mm having crushing strength not less than 75Kg/Sqcm in cement mortar (1:6) including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, labour cess, scaffolding, curing for required period, T&P, etc. all complete as per the direction of the engineer-in-charge. Ground Floor

Providing 1st class Fly Ash Brick Masonry Work Using (250mmx120mmx80mm) Size Fly-Ash in Superstructure having crushing strength not less than 75Kg/Sqcm in Cement Mortar (1:6) after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, coFBelling etc as per drawings. including cost, conveyance, all taxes, royalties, loading and unloading of all materials, including cost of all labour, scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. (Ground Floor)

First Floor

Terrace Floor

Providing and laying Brick masonry work in Superstructure using Fly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. Ground Floor)

First Floor

Terrace Floor

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. Ground Floor

First Floor

Terrace Floor

Providing 12mm thick Cement Plaster in Cement Mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. Ground Floor

First Floor

Providing 6mm thick Cement Plaster(1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment with ordinary Portland cement (OPC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor

First Floor

Terrace Floor

Providing G.I.Pipe in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer all complete. Terrace floor

Supplying, fitting & fixing of 0.4mm thick pre-painted Al-Zn colour coated iron profile sheet of approved make (Tata blue scope / JSW coloron / Bhusan / Equivalent) in roof with drilling hole in wind ties including fixing of ridges, valleys, etc. including cost of hardware fittings, cost of all materials, labour, conveyance, taxes, loading, unloading, lapping, T&P, etc. all complete. Terrace Floor

Provinding and fixing of WPC Door Frames having the density 1000kg/M3 ,Walnut or any type of surface colour treatment ,100% water proof, termite proof & environment friendly including fire Retardent ,UV Resistant with Rebate cuts and Finished cross section size 75mm X 45mm or 90mm x 50mm ,including cost of all materials,one coat primer,all labour, conveyance, taxes, loading, unloading, scaffolding, staging, T&P, etc.Complete as per the direction of the Engineer-in-charge. Ground Floor

First Floor

Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors, windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. Ground Floor

First Floor

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per the direction of Engineer-in-charge. Ground Floor

First Floor

Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA Ltd) Sliding Windows -60 Series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer outer frames and window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thgickness of 1.5mm prefabricated and wellded through fusion welding and the window frame shall be fitted with 6mm thick clear toughened glass of saint gobain make duly fiuxed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. Ground Floor

First Floor

Supplying, fitting and fixing of G.I. Grills in windows made out of G.I. square bars, angles, flats, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. Ground Floor

First Floor

Supplying, fitting and fixing of G.I. Grills in Gate made out of G.I. square bars, angles, flats, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. Ground Floor

Terrace Floor

Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. Ground Floor

First Floor

Terrace Floor

Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. Ground Floor

First Floor

Terrace Floor

Providing and applying 2 Coats Plastic Emulsion Paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance,royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) Ground Floor

First Floor

Terrace Floor

Painting Two Coats of Synthetic Enamel Paint over Iron Works as per approved shade of approved quality over a coat of primer, sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use). Ground Floor

First Floor

Terrace Floor

Supplying, fitting and fixing industrial vitrified tile in floors of size 600mm x 600mm (Plain/ivory) of approved make confirming to IS:13755 laid on 20mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use. Ground Floor

First Floor

Supplying, fitting and fixing Industrial Vitrified tile in Dado/Skirting and risers of steps on 12mm thick cement mortar (1:3) (1 Cement : 3 Coarse sand) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. Ground Floor

First Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc.as per the direction of engineer-in-charge.Ground Floor

First Floor

Internal Electrical Work Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia Non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire- Finolex/ L&T/Anchor/Polycab/Havells/Great white/RR/V-gurad/HPL 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia

2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-

2 X 4 sq.mm +1 X 1.5 sq.mm -do-

2 X 6 sq.mm + 1 X 2.5 sq.mm 25 mm dia

Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required. 1 X 1.5sqmm

S/F of Ding dong bell (Make - Cona/ Anchor/ Greatwhite)

S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .

S/F of 32A Flash type DP switch (Make - Cona/ Anchor)

S/F of Clamp & S.hook

Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light.

Supply and fixing of following Almunium Service wire including G.I. Stay wire ISI Marked( make-Polycab/v-Guard/ Mahavir/ or equivalent) 10 Sq mm

Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 20 Watt 4' LED tube lights

Supply and fixing of LED round / square recess mounted panel Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 18 Watt (210 mm x 210 mm)

Supply and fixing of LED flood light (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) 60watt

Supply and fixing 10 Watt LED B.H fittings (Make-Havells/ Cona/ Panasonic)

Supply and fixing of Different type fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent) 48" Ceilling fan

S/F of 400 mm Wall mounted fan (Make - Havells - plantina/ Usha - Colossus, Mist air/ Crompton - Window flo)

S/F of Exhaust fan12" (Make - Havells/ Usha/ Crompton/ Almonard)

MCB Enclosour (Make-Legrand/Simens/Hager/Schinder DP

Supply and fixing of following different DD DB BOX .(Make-Legrand/ Hager/ Simens/ schneider) 16way spn Double door DB BOX.

Supply and fixing of 6Amp to 32A rating 240 V/415 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand/ Hager/ Simens/ schneider) 6 to 32 SP MCB

6 to 32 DP MCB

63 A DP MCB

Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required.

Providing and fixing 8 SWG (4mm) dia copper wire on surface or recess for loop earthing along with existing surface/recesed conduit as required

Providing and fixing of extra down rod of 20 cm length G.I pipe 20 mm dia heavy gauge including painting etc as required.

Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch(Legrand mylinc/ Schneider clipsal/Hager insysta) ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL) Group-A -L.P- 8 F.P- C.B.P-

Group-B L.P- 12 F.P- 3 C.B.P-

Group-C L.P- 24 F.P-10 C.B.P-1

Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Hager insysta)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta /or equivalent)

Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)

S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

S/F of Multipurpose board consisting 3nos. 6Amp plug and switch Modular on metal box and Modular cover with all connections ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

Supply and fixing of Modular switch ,Socket , ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent) 16Amp socket.(Modular type )( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)

32 A DP modular switch with indicator, ISI marked

Supply and fixing Modular base & cover 1/2 module

Supply and fixing Modular G.I. Box 1/2/3 module

Supply & Fixing of Different Ac Machine (Fixed model STAR RATED) (O GENERAL / DIAKIN/ Mitsubishi) 1.5 Ton

S/F of Stabilizer (Make - V-Guard/ Microtec/Leotonics/ Alfa/ L. Power) 130 to 280 volt 4KVA

Copper cooling Piping With Insulation and Power Cable for 1.5Ton Split AC

S/F of Nylon Netted Drain Pipe with C clamp

S/F. of Powder coated Wall Stand for outdoor unit with Anchor Fastener (For 1.5 Ton/2 Ton)

Lightening Arrester Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Roof conductor holder - Stainless steel Conductor holder: With Bottom section and conductor holder stainless steel (V2A)Bottom section with Ø 8.5 mm slot. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .

Supply , Installation, Testing & commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised.Tested as per IEC 62561.(2nos/expansion piece ).(Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. (Make:OBO/Stromking/ Satalite-3/Indilac)

DOWN CONDUCTOR Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor. Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. (Make:OBO/Stromking/ Satalite-3/Indilac)

Ring & vertical earthing system Supply , Installation, Testing & commissioning of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current.

Supply , Installation, Testing & commissioning of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot- dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of universal clamp made of SS to connect rod with flat conductor(Make:OBO/Stromking/ Satalite-3/Indilac) .

Supply , Installation, Testing & commissioning of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested (Make:OBO/Stromking/ Satalite-3/Indilac)

Supply , Installation, Testing & commissioning of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system(Make:OBO/Stromking/ Satalite-3/Indilac).

Fire fighting system Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)

Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)

Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.

Supply, Installation, Testing & Comissioning of 1550 VA/ 12V IGBT based .(Make: MICROTEK - Heavy duty UPS 1550 SW / LUMINOUS /Eq as per directio of E.I.C).

Supply and fixing of 12 v , 200AH battery make -EXIDE- 6EL200 / EQ As per direction of E.I.C

Supply and fixing of Battery rack for Battery / EQ As per direction of E.I.C

PH WORK Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/upvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast) 20mm dia CPVC pipe Ground Floor

25mm dia CPVC pipe

25mm dia UPVC ASTM-D Pipes

32mm dia UPVC ASTM-D Pipes

20mm dia CPVC pipe First Floor

25mm dia CPVC pipe First Floor

25mm dia UPVC ASTM-D Pipes First Floor

32mm dia UPVC ASTM-D Pipes Second Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. Ground floor

First Floor

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge Fixing 2000Ltr Roto-moulded water storage tanks-In 2nd floor

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. G.F.--250mm thick wall

F.F.--250mm thick wall

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15 mm dia CP long body Bib cock (Plaza/ Aquatic/ Amber/Kerovit/Somany Cera/ HGydro)

15 mm dia CP two way Bib cock(Plaza/Aquatic/Amber/Kerovit/Somany Cera/ Hydro)

15mm dia CP angle stop cock(Plaza/Aquatic/Amber/Kerovit/Somany Cera/ Hydro)

25mm dia CPVC Ball valve(Supreme/Ashirvad)

32mm dia CPVC Ball valve(Supreme/Ashirvad)

15mm dia CP flange

15mm dia CP extension piece

15mm dia CP Health Faucet (Hindware Health Faucet-Cat No-F160002CP

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia U-PVC SWR pipe(Supreme/Ashirvad/Oriplast)

110mm U-PVC door Tee

110mm dia U-PVC Plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC plain shoe bend

110mm dia U-PVC offset without ear

110mm dia. U-PVC socket plain

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

125mm dia CP grating

PVC clamp suitable for 50mm to 110mm dia pipe

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge European water closet with S trap plain with seat cover (Parryware/ Hindware/Kerovit/Somay)

Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci P or S trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 580mm O.W.C. (Kerovit/ Parryware /Hindware/ Neycer/Rak)

Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge 10 Liters capacity PVC cistern with 32mm dia flush bend (SLIMLINE WHITE (Parryware/Hindware/Kerovit/Somay)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Wash hand basin with full pedestal (Parryware/ Hindware/Kerovit/Somay/Cera)

Under counter wash hand Basin((Parryware/Hindware/Kerovit/Somay)

Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half Stall urinal (Hindware make -60002)

15mm dia urinal spreader

32mm dia C.P. dome waste

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge B.E.Mirror

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail (Plaza/ Aquatic/ Amber/Kerovit/Somany)

CP Towel Ring(Plaza/Aquatic/Amber/Kerovit/Somany)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge 600mmx125mm size glass shelf with C.P guard rail

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor

First Floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor

First Floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/ Somany/ Johnson/Orient Bell to be pre-approved by the Engineer in charge) Ground floor

First Floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Glazed tile of size 45cmx30cm Kajaria/ Somany/ Johnson/Orient Bellto be pre-approved by the Engineer in charge) Ground Floor

First Floor

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm. (Fiber space/ Darwaja/Tarini doors/Trinayan composits/SM doors) Ground floor & 1st Floor

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mmx760mmx460mm

R.C.P.C Cover(18" round man hole cover)

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.40m dia x 2.00m deep

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia alround concrete

Construction of 20 users Brick septic tank- 1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials,labour, T&P and providing Ist class K.B.Brick work in C.M (1:3) in foundation and plinth including watering, curring, conveyance of all materials to site.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.

Supplying all materials,labour,T&P and providing vent base in cement concrete(1:2:4) using 12mm size HG chips all complete including watering,curing,conveyance of all materials to worksite,payment of royalty texes etc. all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Filling in foundation and plinth with excavated materials, including watering and ramming as directed by the Engineer in charge

Please Enable Macros to View BoQ information