REPAIRS TO BED HARD STEEL CHARPOY IP HARD TOP BIN LINEN MULTI PURPOSE SIDE BOARD MAP ALMIRAH LARGE STEEL 1 2H 1 2 S MAP CHAIR WRITING MAP CHAIR COMPUTER MAP CHAIR VERANDAH OFFICERS JCOS MAP TV TROLLEY TABLE COMPUTER CHAIR SCHOOL WITH HAND BOARD AT

Amount

Bed Hard steel w/o MNF Set ( FD/E6/MAP/08 & FD/E6/MAP/08( R) M & L for welding with 20 x 45 x 3 mm MS Angle Iron cleat with holes to fix screws to support 18mm thick Particle Board including screws complete for Bed hard steel complete all as specified and as directed.

M & L for removing unserviceable 18 mm thick prelaminated particle board with PVC edging from Head Board of Bed Hard Steel and S&F new 18 mm thick prelaminated particle board with PVC edging with suitable nut & bolt plete all as specified and as directed.

M & L for removing unserviceable 18 mm thick prelaminated particle board with PVC edging from Foot Board of Bed Hard Steel and S&F new 18 mm thick prelaminated particle board with PVC edging with suitable nut & bolt plete all as specified and as directed.

Supply and fix new long tube frame 25mmx65mm, 16 Gauge and removing the existing unserviceable broken long tube frame and applying two coats of synthetic enamel paint Black colour by machine spray including necessary gas welding wherever required complete all as specified as shown on drawing and complete all as specified and as directed

Material and Labour for preparing the short tube frame from broken long tube frame obtained from item No.4 above duly cutting and fixing to charpoy including removing the existing unserviceable short tube frame complete all as specified as shown on drawing and as directed.

Labour for removing the existing Unserviceable or wornout plywood top of Bed Hard Steel and S&F new plywood top of suitable size 12 mm thick BWR Grade plete all as specified and as directed.

Supply & Fix 3mm thick PVC shoes to the legs of Bed Hard Steel plete all as specified and as directed.

M & L for providing MS flat strip of size 70mm x 40mm x3mm with a bore of 10mm for nut and bolt (to be fixed in such a way that 20mm will be welded to headrest/footrest and 50mm will be welded to long rail of bed hard steel) to bind long rail and foot board/head board of bed hard steel duly welded and supported with suitable nut, bolt & washer and plete all as specified and as directed.

Material and labour for preparing the old steel surfaces and painting with two coats of Black synthetic enamel paint with machine spray and welding as required to be broken frames complete all as specified,as shown on drawing and plete all as specified and as directed.

Charpoy IP Hard top FD/MAP-II/01 Material and Labour for carry out repairs like existing tube frame removing the broken unserviceable legs, long tube frame, short tube frame, and fixing new reassembling the charpoy and welding as required to be broken and applying two coats of synthetic enamel paint Black colour by machine spray including necessary gas welding wherever required complete all as specified and as directed by Engineer-In-Charge. Note: Long tube frame, short tube frame and legs shall be measured, paid separately as supply & fix only.

Supply and fix new long tube frame 25mmx65mmx1980mm, 16 Gauge complete all as specified as shown on drawing and as directed.

Material and Labour for preparing the short tube frame from broken long tube frame obtained from item No. 10 above duly cutting and fixing to charpoy complete all as specified as shown on drawing and as directed.

Supply and fix new MS tube leg of size 32mmx32mmx440mm, 16 Gauge complete all as specified as shown on drawing and as directed.

Supply and fix new MS tube for stiffeners to support ply and stiffeners to support legs of size 25mmx25mmx850mm, 16 Gauge and removing the existing unserviceable broken MS stiffeners complete all as specified as shown on drawing and as directed.

Supply & Fix 1930x850mm x12mm thick BWR Grade plywood conforming to IS303 all edges of plywood top be filled with putty to prevent observation moisturer and fixed with suitable nut & bolt complete as specified and directed.

ALMIRAH LARGE STEEL 1/2H 1/2S FD/E6/MAP/18 Supply and fix chromium plated cast iron handle of 125mm long and including removing the existing unserviceable handle complete all as specified and as directed.

Supply and fix 6 levers lock with brass levers and stainless steel keys in duplicate suitable and including removing the existing unserviceable lock complete all as specified and as directed.

Supply & Fix slimline almirah lock G type model with three way locking device (existing size) to the front shutter and duly providing locks made of brass of approved make best quality including removing the existing unserviceable lock complete all as specified and as directed.

Cutting and removing the existing damaged leg and supply and fix new leg made out of 18 gauge thick mild steel sheet duly welded, cutting, bend to required shape including painting with two coats of olive green synthetic enamel paint over one coat of red oxide primer by machine spray and providing 3mm thick hard rubber pad to the bottom of leg complete all as specified and as directed.

Removing the existing unserviceable/damaged shelf and supply and fix shelf made with mild steel sheet CRC of 1mm thick bent to shape and applying two coats of synthetic enamel paint over one coat of red oxide primer by machine spray including welding complete all as specified and as directed.

Material and labour for preparation of surfaces internally and externally and applying two coats of synthetic enamel paint of Olive Green colour by machine spray including necessary spot welding whereever required to fix the broken/loose parts complete all as specified and as directed.

CHAIR WRITING FD/E6/MAP/12 Repairs to chair writing by repairing and replacing unserviceable/broken parts with suitable sizes and shapes as for the following items with necessary gas/arc welding to all broken steel frames parts of the chairs where ever required and painting the chairs, frames with two coats of synthetic enamel paint with machine spray all as existing model/pattern plete all as specified and as directed. Note : Necessary spares required for replacement shall be measured and paid separately.

Supply and fix Arm rest of size 280mm x 220mm made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert, it shall be scratch and weather resistant hand rest sectio to have slope towards front complete all as specified and as directed.

Supply and fix 50mm new foam cushion for seat of size 480mm x 470mm and shall be moulded with density 50-55 Kg per cubic metre thick duly making to required shape as per existing cushion complete all as specified and as directed.

Supply and fix 12mm thick commercial machine hot pressed plywood for seat of size 480mmx470mm and removing the existing unserviceable/broken plywood seat complete all as specified and as directed.

Supply and fix 50mm new foam cushion for back of size 540mm x 460mm and shall be moulded with density 50-55 Kg per cubic metre thick duly making to required shape as per existing cushion complete all as specified and as directed.

Supply and fix 12mm thick commercial machine hot pressed plywood for back of size 540mmx460mm and removing the existing unserviceable/broken plywood seat complete all as specified and as directed.

Supply and fix new tapestry cloth of cost not less than 250.00 Rupees per metre duly making required shape to suit the existing sample for seat of size 480mm x 470mm and back of size 540mm x 460mm as per existing model and removing the existing tapestry cloth complete all as specified and as directed.

Supply and fix 2mm thick, 20mm wide, 400mm long mild steel flat iron support frame of chair writing MAP with necessary welding including applying two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as specified and as directed.

Table Computer FD/E6/MAP/03 Removing the unserviceable table top supply and fix new top made out of pre-laminated particel board with exterior grade of size 1070 x 750mm duly poviding 4mm wooden beading duly polished and complete all as specified and shown on drawing and as directed.

Removing the unserviceable telescopic channels of pull out tray/drawer & supply and fix new telescopic channel as per existing size and complete all as specified and shown on drawing and as directed.

Removing the unserviceable key board supply and fix new key board made out of pre-laminated particel board of size 450 x 480mm duly poviding PVC beading and complete all as specified and shown on drawing and as directed.

Removing the unserviceable Rectangular PVC cover and supply and fix new Rectangular PVC cover of size 25x50mm and complete all as specified and shown on drawing and as directed.

Removing the unserviceable side Verticle board of table computer and supply and fix new side verticle board of size 230x450mm made out of pre-laminated particle board 18mm thick and complete all as specified and shown on drawing and as directed.

CHAIR VERANDAH (FD/MAP-II/15) Supply and fix PVC seat 4mm thick of size 455x455mm with weight not less than 1.85 KG and grooves 90x10mm 10 No. on seat to chair verandah and supply & fix 2mm thick, 20mm wide, 420 long mild steel flat iron support to PVC seat with necessary welding including removing the existing unserviceable PVC seat complete all as specified, as shown on drawing and as directed.

Supply and fix PVC back 4mm thick of size 455x455mm with weight not less than 1.85 KG and grooves 90x10mm 10 No. on back to chair verandah including removing the existing unserviceable PVC seat & back complete all as specified, as shown on drawing and as directed.

Material and labour for preparing the old steel surfaces and painting with two coats of white synthetic enamel paint with machine spray and providing 4 No’s new PVC inner shoes including taking down the broken shoes and welding as required to be broken frames complete all as specified, as shown on drawing and as directed.

CHAIR SCHOOL WITH HAND BOARD FD/E6/MAP/05 Supply and fix PVC back & seat and including removing the existing unserviceable PVC back & seat complete all as specified, as shown on drawing and as directed.

Supply and fix Hand Board of size 585mm x 300mm Pre-laminted particle board 18mm thick top openable with PVC edging (Hinged on RHS) and including removing the existing unserviceable Hand Board complete all as specified, as shown on drawing and as directed.

Material and labour for preparing the old steel surfaces and painting with two coats of black synthetic enamel paint with machine spray and providing 4 No’s new PVC shoes including welding as required to be broken frames complete all as specified, as shown on drawing and as directed.

Chair Dining FD/MAP-II/05 (JCO/ORs) Supply and fix teak wood rear leg 55mm x 30mm and removing the existing unserviceable/broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg of size 55x30mm and removing the existing unserviceable/broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood stiffener of size 25x 20mm and removing the existing unserviceable/broken stiffener complete all as specified and shown on drawing and as directed.

Supply and fix teak wood back rest of size 45x 15 mm to the back frame and removing the existing unserviceable/broken back rest frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood side rail of size 65x30mm of seat frame and removing the existing unserviceable/broken side rail of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood Corner brackets of size 65x65x25 mm complete all as specified and shown on drawing and as directed.

Supply and fix new PVC seat and Removing existing unserviceable PVC seat complete all as specified and shown on drawing and as directed.

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces complete all as specified and shown drawing and as directed.

Rack shoe steel (FD/MAP-II/02( R) ) M&L for scraping down old painted surface and two coats of synthetic enamel paint Black shade to the frame complete all as specified and as directed.

M&L for Spot welding to bind the broken component of rack shoe steel complete all as specified and as directed.

Chair Easy cushioned ( FD-358) Supply and fix teak wood rear leg and providing hard rubber ring screwed to bottom of leg and removing the existing unserviceable/broken rear leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood front leg and providing hard rubber ring screwed to botom of leg and removing the existing unserviceable/broken front leg complete all as specified and shown on drawing and as directed.

Supply and fix teak wood long side rail of seat frame and removing the existing unserviceable/broken long side of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood Front & back rail of seat frame and removing the existing unserviceable/broken Front & back rail of seat frame complete all as specified and shown on drawing and as directed.

Supply and fix teak wood arm rest and removing the existing unserviceable/broken arm rest complete all as specified and shown on drawing and as directed.

Labour for removing the existing worn-out/ unserviceable tapestry cloth/rexin, foam, etc from seat and back including cushioning on arms of chair easy cushioned and S & F new tapestry cloth (Tapestry cloth not less than Rs.250/- per mtr) of approved quality and shade) and synthetic foam of appropriate size all as specified and directed

Material and labour for polishing to repaired chairs duly preparing the old and new surfaces complete all as specified and shown on drawing and as directed.

A.K. MARKETING ASSOCIATES

M/S DIVIJA BUILDERS

BALAJISTEELINDUSTRIES

sandhya enterprises

SN POWER TECH