Loading…
Loading…
Tender Value
₹5.9 L
EMD Value
₹14,900
Closing Date
2 Jul 2026, 11:00 pmClosed
Karnataka Power Transmission Corporation Limited
SRINIVAS T
08212455770
9448999951
Replacement of 11 Nos of age old Sluggish 18.3 kA Power gear make switchgears (MCVCB) by 11kV, 31.5kA MEI Make Switchgears ( MCVCB) and providing additional 02 Nos of Capacitor Bank Breaker at 66/11 KV K.R.Nagara Substation, Mysuru on-PTK basis-Others - CALL5
KPTCL/2026-27/SS/WORK_INDENT3865
KPTCL/2026-27/SS/WORK_INDENT3865
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
12 documents required · 12 mandatory
The Bidder shall be registered firm as Sole Proprietorship/Partnership/Pvt Ltd Company etc
Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx2.5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Minimum Average Annual Turnover (MAAT) of the bidder for best two(02) year out of preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
For other than proprietorship, the Bidder shall furnish the registered partnership deed and Power of Attorney
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that scanned copies of Letter of Undertaking to abide by and fulfil all the terms & conditions provisioned in the Tender document
Bidder shall ensure that scanned copies of No Deviation CERTIFICATE
Land Border - Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides
ESI certificate
EPF Certificate
PAN copy
Tender shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Govt. of Karnataka
The Tenderer shall not be under any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL.
Tenderer/bidder should not have been Blacklisted / disqualified for non-performance in any of the Government utilities in the past five years as on date of Bid opening.
No notice issued in respect of ongoing works in the last 6 months as on date of bid submission invoking Risk & Cost clause and where the work is not completed/charged.
₹500
₹14,900
18 Jun 2026
18 Jun 2026
4 Jul 2026
25 Jun 2026
22 Jun 2026
Replacement of 11 Nos of age old Sluggish 18.3 kA Power gear make switchgears (MCVCB) by 11kV, 31.5kA MEI Make Switchgears ( MCVCB) and providing additional 02 Nos of Capacitor Bank Breaker at 66/11 KV K.R.Nagara Substation, Mysuru on-PTK basis-Others - CALL5
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
4core x 6sqmm Copper Control cable (New Cable)
19 core x 2.5sqmm Copper Control cable (New Cable)
Replacement of 11 Nos of age old Sluggish 18.3 kA Power gear make switchgears (MCVCB) by 11kV, 31.5kA MEI Make Switchgears ( MCVCB) and providing additional 02 Nos of Capacitor Bank Breaker at 66/11 KV K.R.Nagara Substation, Mysuru on-PTK basis-Others - CALL5
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying to required line and slope roofing with semicorrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and...
Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, includin...
Replacement of 11 Nos of age old Sluggish 18.3 kA Power gear make switchgears (MCVCB) by 11kV, 31.5kA MEI Make Switchgears ( MCVCB) and providing additional 02 Nos of Capacitor Bank Breaker at 66/11 KV K.R.Nagara Substation, Mysuru on-PTK basis-Others - CALL5
11 kV MCVCB, 500 MVA, 31.5 kA (Scada Compatible) -Incomer / Feeder / Capacitor Bank Breakers :
Erection, alignment and fixing to the foundation, indoor/outdoor 11 kV switchgear panel/unit including mo...
Testing and Commissioning charges (For all the above switchgears) (2 I/C+1BC+8F+2CB)= 13 Breakers
Identification, ferruling, crimping and termination of wires in Breaker limbs, marshalling box & wirin...
Releasing & Re-erection of Breaker for Re-arangment work
Testing and Commissioning- Rearranged 5Nos of MEI breakers
Releasing & Re-laying of 3CX240 Sqmm 11kV XLPE UG Cable
Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 part clamp out of G.I.Flat 50X6mm continuously welded alround the pipe using cast iron welding ele...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conn...
Supplying & Providing 450 mm dia 450mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,
(5nos for deep bore earthing)
4core x 6sqmm Copper Control cable (New Cable)
19 core x 2.5sqmm Copper Control cable (New Cable)
Supply and fixing of
various type lugs and ferrules for Copper Control cable & Name plate for CI Pipe & restructuring Chequre plates after errection of MCVCB Panels
Decomissioning of existing 11kV Power Gear Breaker 2I+1BC+8F
De- wiring 11kV Indoor/Outdoor Switchgear
Decomissioning of existing Adaptor panel
Loading of 11 kV Switchgears
(Loading at K.R.Nagara S/s)
Unloading of 11 kV Switchgears
(Loading at Store, Hootagalli)
Transportation of released Breakers etc from 66/11kV K.R.Nagara S/s to Divisional Major works store, Hootagalli Mysore.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT - K R Nagar5pdf.pdf
Instructions to Tenderers • 0.65 MB
Tender document kw1G KRN.pdf
Tender Document • 2.28 MB
Tech Volume II A B.zip
Technical Information / Worksheet • 19.19 MB
Work on Hand details format.doc
Commercial Information / Worksheet • 0.06 MB
credit facility certificate FORMAT new format.doc
Commercial Information / Worksheet • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].