GENERALDistrict court Alappuzha- Modification of the chamber of MAC Tribunal Judge Alappuzha2025-26General Civil Work

Detailed estimate

OD118002/2025-2026:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (From DSR 2021 Spec:13.88)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

OD118089/2025-2026:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

OD117969/2025-2026:Providing and fixing WPC Louver sheet of wooden finish complete as per the architectural drawings and the directions of Engineer in charge .

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

OD117975/2025-2026:Providing and supplying Horizontal blinds as curtain rolling type for windows.

OD118185/2025-2026:18 mm thick HDF board with both sides decorative lamination including all cost conveyance, labour charge etc complete as per the direction of departmental officers at site excluding cost of fittings

OD126270/2025-2026:Supplying and fixing stainless steel auto closer hinges for cupboard shutters with S.S screws, etc complete as directed by the site Engineer-in-charge.

OD126279/2025-2026: Providing and fixing Multipurpose cupboard lock approved quality including all cost conveyance labour charge etc complete as per the direction of Engineer-in-charge

OD329048/2025-2026:Providing and fixing G.I door of size 120 x 205 cms made of high quality galvanized steel and state- of - ART technology with unique features like multi point, multi position lever locking system , unique finish, non duplicable key, installation accessories etc. with eye catching wooden textures with durable special mat finish heat transmission painting with colour guard and UV protection treatment.

OD329402/2025-2026:Providing and fixing G.I door of size 110 x 205 cms made of high quality galvanized steel and state- of - ART technology with unique features like multi point, multi position lever locking system , unique finish, installation accessories etc. with eye catching wooden textures with durable special mat finish heat transmission painting with colour guard and UV protection treatment.

OD126283/2025-2026:Providing and fixing stainless steel drawer channel 300 mm with stainless steel screws etc. complete based on 9.70.1

9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

OD329138/2025-2026:Providing and fixing letter of size 13 cm or nearest size including all cost conveyance labour charges etc. complete as per the direction of dept. engineer in charge

OD329145/2025-2026: Providing and fixing 3mm thick Aluminium Composite Panel with minimum thickness of Aluminium layer on both sides 0.25mm fixed with CP Brass/steel screws for paneling in doors and windows/ cupboards/ partitions etc. including all materials, labour charges, hire charges etc. complete as per the direction of Engineer in charge.

OD125023/2025-2026:Fitter engaging for Aluminium works

OD117980/2025-2026:Engaging Man Mazdoor for rearranging the old rack and furniture

OD125024/2025-2026:Labour engaged for emergency plumbing works as per directed by the Engineer-In-Charge

Please Enable Macros to View BoQ information