Kerala

AOC

Works

Civil Works - Buildings

22957-2026 GENERAL-School openning 2026- Gov LPS Udhiyaramolla-School opening maintenance work -General Civil Work

Local Self Government Department

Thiruvananthapuram Corporation | Thiruvananthapuram, Kerala

Amount: ₹2.5 LCloses: 8 May 2026Closed

Bids

Item Rate

2 Bids8 Jun 2026

#	Company	Amount	Rank	Status
1	L1₹2.5 LAccepted-AOC	₹2.5 L	L1	Accepted-AOC Accepted Vide Resolution
2	L2₹2.5 LRejected-AOC	₹2.5 L	L2	Rejected-AOC Higher rate and hence not admitted

BoQ Line Items

Line Items (8)

Sl No	Description	Qty	Unit	PRAVEEN M L2	SURESH KUMAR.S L1
1.00school
1.00	50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	5.62	cum	6,800.31 ₹38,251.74	6,883 ₹38,716.88
1.00	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	75	sqm	388.72 ₹29,154	393 ₹29,475
1.00	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	255	sqm	174.42 ₹44,477.10	150 ₹38,250
1.00	OD3522/2026-2027:Supplying fixind PVCdoor with frame including all fittings	1	each	2,866 ₹2,866	2,903 ₹2,903
1.00	OD1808/2026-2027:Labor for cleaning	10	Day	1,091.84 ₹10,918.40	1,100 ₹11,000
1.01	10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes	250	kg	213.77 ₹53,442.50	216 ₹54,000
1.01	OD3528/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (from spec 12.50	35	sqm	616.54 ₹21,578.90	624 ₹21,840
1.01	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	275	kg	180.02 ₹49,505.50	182 ₹50,050

Tender Value

₹2.5 L

EMD Value

₹6,337

Closing Date

8 May 2026, 1:00 pmClosed

Tender Inviting Organisation

Name

Superintending Engineer

Address

Office of the Superintending Engineer, LSGD SE - Thiruvananthapuram Corporation

Work Description

22957-2026 GENERAL-School openning 2026- Gov LPS Udhiyaramolla-School opening maintenance work -General Civil Work

Tender Information

Tender ID

2026_LSGD_849151_8

Reference Number

DB/62983/2026-27(2)

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Period of Work

30 days

Location

Thiruvananthapuram Corporation

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredNOTICE INVITING TENDER (.pdf)

RequiredSCANNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredSCANNED COPY OF E - PAYMENT FORM (.pdf)

RequiredSCANNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredSCANNED COPY OF AFFIDAVIT (.pdf)

RequiredSCANNED COPY OF FORM OF TENDER (.pdf)

RequiredSBD DOWNLOADED FROM E TENDER WEBSITE (.pdf)

Fee & Financial Details

Tender Fee Amount

₹560

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,337

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

8 Jun 2026

Published

2 May 2026

Bid Opening

11 May 2026

Download Starts

2 May 2026

Download Ends

8 May 2026

Submission Starts

2 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount	Item Code
1school
1.001	50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete	-	cum	-	-	BI01010001010000000000000515BI0100001114
1.002	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	-	sqm	-	-	BI01010001010000000000000515BI0100001115
1.003	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	-	sqm	-	-	BI01010001010000000000000515BI0100001116
1.004	OD3522/2026-2027:Supplying fixind PVCdoor with frame including all fittings	-	each	-	-	BI01010001010000000000000515BI0100001117
1.005	OD1808/2026-2027:Labor for cleaning	-	Day	-	-	BI01010001010000000000000515BI0100001118
1.006	10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes	-	kg	-	-	BI01010001010000000000000515BI0100001119
1.007	OD3528/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (from spec 12.50	-	sqm	-	-	BI01010001010000000000000515BI0100001120
1.008	10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	-	kg	-	-	BI01010001010000000000000515BI0100001121

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.29 MB

Tendernotice_2.pdf

PDF • 0.24 MB

Tendernotice_3.pdf

PDF • 0.46 MB

Work Item Documents

BOQ_1434933.xls

BOQ • 0.30 MB

07454840638355LSGD_CELSGD_FL_22957_2026I.xls

Tender Documents • 0.30 MB

fot.pdf

Tender Documents • 0.29 MB

prel.pdf

Tender Documents • 0.30 MB

viewsbd.pdf

Tender Documents • 3.14 MB

Ready to Participate?

Download all tender documents and submit your bid