APART/NOCP/ROADS/GLP-02

Amount

Setting out Unit = 1 KM Reference Bench Mark and Bench Mark pillar as per MORD and Technical Specification Clause No. - 100 v) Typical benchmark as per drawing 200

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead 1000m including removal and disposal of top organic soil not exceeding 150mm thickness.

Construction of Embankment with approved materials obtained from borrow pits, with all lead and lift upto 1.5m, transporting to site, speeding, grading to required slope and compacting to meet requirement of table 300.1 and 300.2 with a lead upto 1000m as per MORD technical specification clause 301.5. From private land

Construction of sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts and leads, transporting to site, spreading, grading to required slope and compacting (including land compension of earth) as per drawing Technical Specifications Clause 303.1 From private land

Construction of granular sub-base by providing well graded meterials, spreading in uniform layers (with drainage layer) with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MORD technical specification clause 401 . (i) for grading II material Drainage layer & Top layer

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density grading-2 as per MORD technical specification clause 405 Using stone screening type A -13.2 mm size

Providing ,laying , spreading and compacting stone aggregates of specific sizes to water bound macadam specification including transportation of materials with all lead and lift spreading at site in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregates, watering and compacting to the required density of grading-3 as per MORD technical specification clause 405 using stone screening Type-B 11.2 mm

Interlocking Concrete Block Pavement Providing and laying interlocking concrete Block Pavements (M 40) having thickness 80mm as per technical specifications clause 1504 (inclusive of edge restraint and carriage)

Providing and fixing of typical in formatory singboard with logo as per MORD Specification drawing. Three MS plates of 1.6mm thick, top and middle plate duely welded width MS flat iron 25mm X 5mm Size on back on edges. The lower plate will be welded with MS angle iron flam of 25mm X 25mm X 5mm. The angle iron frame of the lower most plate and flat iron frame of middile plate will be welded to 2 Nos. 75mm X 75mm of 12 SWG sheet tubes posts duely embdded in cement concrete M-15 grade blocks of 450mm X 450mm X 600mm, 600mm below ground level the top diamond plate will be welded to middle plate by 47mm X 47mm of 12 SWG steel plate tube. All M.S will be stove enameld on bothside. Lettering and printing arrows, boder will be painted with radimixed syinthetic enamel paint of superir quality in required shade and cloure. All sections of framed posts and steel tube will be painted with primer and two coats epoxy paint as per drawing Clause 1701 and Annexure on 1700.1

Traffic Signs Retro - reflectorised Traffic Signs Providing an d fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawings and MORD Technical Specification Clause 801. (ii) 60cm circular

Traffic Signs Retro - reflectorised Traffic Signs Providing an d fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawings and MORD Technical Specification Clause 801. (ii) 600mm circular

Painting lines, dashes, arrows, etc. on road in Two coats on New Work Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demmarcation at dsite and traffic control as per drawing and MORD technical specification Clause 1702

Kilometre Stone Reinforced cement concrete M15 grade Kilometre stone/local stoneof standard design as per IRC:8 fixing in position including painting and printing , etc as per drawing and MORD Technical Specification Clause 1703 (iii) 200 meter Stone (Precast)

Kilometre Stone Reinforced cement concrete M15 grade Kilometre stone/ local stone of standard design as per IRC :8 fixing in position including painting and printing , etc as per drawing and MORD Technical Specification Clause 1703 Ordinary Kilometer Stone (Precast)

Providing and laying standard single cell pre-cast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary earthwork in excavation, backfilling, transportation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler,erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and Technical Specification Clause 1600, 1700, MORD Specification (Measurement shall be made in number) (i) Assam Standard Culvert (ASC) 1m X 1m

Providing and laying standard single cell pre-cast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary earthwork in excavation, backfilling, transportation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler, erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and MORD Technical Specifications Clause 1600, 1700, MORD specification (i) Assam Standard Culvert (ASC) 2m X 2m (rate as per analysis)

Providing and laying standard single cell pre-cast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary earthwork in excavation, backfilling, transportation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler, erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and MORD Technical Specifications Clause 1600, 1700, MORD specification (i) Assam Standard Culvert (ASC) 3m X 3m (rate as per analysis)

Merle Construction and Marketing Pvt.Ltd

JAYANTI CONTRACTORS AND ENGINEERS LTD