Providing stand by motors in Akumarru CPWS Scheme of Machilipatnam Mandal Est Cost Rs:10.00Lakhs

Earthwork in exacavation for structures as per drawing and technical specifications clause 305.1 including setting out, constructionn of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material asp[er technical specification 305 MORD/ 304 MORTH including Contractor's Profit @ 13.615%

Cement concrete (1:4:8)prop using 40 mm gauge HG metal from Approved quarry including cost &conveyance of all materials to site and all labour charges for mixing concrte laying finishing and curing etc using Concrete mixer etc complete including Overheads & C.Profit @13.615% Under Plinth Beam, Center beam, steps and Flooring

Brick Msaonary with CM(1:6) using Country Bricks from approved source including cost and conveyance of all the materials etc complete for Foundation & Basement including Overheads & C.Profit @13.615%

Cost and supply and fabrication charges of steel FE -500 and its fabrication charges incl bending,ting grills and placing in postion and including cost of binding wire etc., as per standard pecifications including Overheads and contractor profit @13.615 %

VRCC Nominal mix (1:2:4) using 20mm HBG graded metal with using required quanity of Steel for 1.00 cum concrete including cost & Conveyance materials of and labour charges for centring mixing concrete laying vibrating and finishing curing etc completed by using for 1 cum with Machine mixing, including conveyance, of materials of sand & metal including Centering charges.& including Overheads & C.Profit @13.615%

Cement Plastring with in CM(1:3) 12 mm Thickincluding cost of all materials and labour charges etc,,complete including conveyance, seigonarage of materials of sand &metal including Centering charges.& including Overheads & C.Profit @13.615%

Painting With Emlusion Paint two coats including cost and conveyance of all the materials etc complete& including Overheads & C.Profit @13.615%.

Design,Supply,Delivery,Erection,testing and commisioning of pumping Machinery (ISI) with all accessories,appurtenances,surge protection devices,ultrasonic flow meter on common delivery main at each pumping station piping as per design requirement.The tenderer shall operate and maintain the facilities during the trail run period.The tenderer shall include provision for spares for two years and for two years maintainenace.The Scope of the work includes electrical switch gear panels,electrical equipment connections including required cabling from pump starter panel to transformers,vaccum pumpsets with necessary piping etc.,for priming centrifugal pumps,crane wherever necessary,fire safety equipment,ventilation system,electrical safety system etc.., for finished item of work including all taxes,duties etc.completeMotors in Clear water sump for filling Clear water from Sump to OHSR with Head-18-38 mts and LPM-1250 (Approx-12.5 HP) OPEN WELL Horizontal Submersible Pumpset

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set. Cost and Supply of 100 mm dia DI Sluice Valve 1.6 MPa

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set. Cost and Supply of 100 mm dia CI 0.60 Mtrs Tailpiece

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set. Cost and Supply of 100 mm dia CI 0.60 Mtrs D/F Pipe

Supply delivery installation commissioning of Centrifugal Mono Block pump set with Single Phase Motor 230 V (-15%+10% range ( - ) 50 HZ with class "F"insulation , of reputed make with ISI make with minimum overall effciency of 75 % at the duty point including cost convenyance of pump set pannel board with accessories and presure guage wth necessary equipment as per specfication along with 15 Mts length of GI pipe medium class (suction=6mts Delivery = 9Mts) with required no of "C" class bends couplings flanges etc, with 30 Mts length of Suitable copper wire of single run as per IS specifications of reputed make encasing in flexible pipe of 10 Mts length from pempset to pannel board and 75 M length of single run of Suitable Aluminem service wire of ISI make including supporting GI wire and cleats one no.of GM gate valve as per IS 778/84 of Suitable size installation and erection of pupm set including foundation bolts and nuts of 25 mm dia and above of sutiable size over a cement concrete bed in C.C (1:2:4) of sutiable size as directed the department fixing panal bord and pumpsets with all accessoriesPipes valves. specials, earthin as per APSEB Specifications etc complete and testing and commissioning of pump set with a trial urn of 15 (fifeen) days incliding cost conveyance erection of pump set with all accessoris, spedials, vaves pipes cable etc complete and Suitable for 18-21 Mts head and 275 to 210 required LPM , 5.00 HP Monoblock ,Three Phase Approved Rate including Overheads & C.Profit @13.615% for 5.00 HP Centrifugal Mono Block pump set. Cost and Supply of 100 mm dia CID Joints