Shifting of 3.3 KV Capacitor Bank with Control Panels and Shed Foundation, making of trench and 11 KV GOAB Structure for support of Bus Bar at main substation 2X3 MVA of PEOCP under Hazaribag Area

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 1.5 m, disposed earth to be levelledand neatly dressed. 2.8.1 Ordinary rock . 2 Mtr X 3 Mtr X 1 Mtr X 2 = 12 CUM 1 Mtr X 1 Mtr X 1 Mtr X 12 Nos= 12 CUM 1 Mtr X 1 Mtr X 1 Mtr X 2 Nos= 2 CUM 21 Mtr X 1 Mtr X 1 Mtr = 21 CUM

Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) For Foundation 2 Mtr X 1.5 Mtr X 0.24 Mtr X 2 Nos X 2 Set =2.88 CUM Capacitor base 2.76 Mtr X 1.5 Mtr X 0.24 Mtr X 2 Nos X 2 Set =3.97 CUM Switch foundation 2 Mtr X 1.5 Mtr X 0.24 Mtr X 2 Nos X 2 Set =2.88 CUM Switch base 2.76 Mtr X 1.5 Mtr X 0.24 Mtr X 2 Nos X 2 Set =3.97 CUM Trench Work 21 Mtr X 1 Mtr X 0.24 Mtr X 2 Wall=10.08

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick

Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) 2 Mtr X 3 Mtr X 0.24 Mtr X 4 Nos=5.76 CUM 1 Mtr X 1 Mtr X 0.50 Mtr X 16 Nos= 8 CUM 0.50 Mtr X 0.50 Mtr X 24 Nos= 6 CUM 0.50 Mtr X 21 Mtr X 0.12 Nos= 1.26 CUM

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 14 MtrX 1 Mtr X 0.24 Mtr=3.36 CUM

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m²

Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for for D.P. structure electric substation switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required. The panel frame with required angle iron/ flat iron members/cross members including mesh welded in frame panel shall be erected between the posts. The angle iron post shall be erected in cement concrete M-15 (1:2:4) (20 mm graded metal) foundation, including excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above groun level. Fencing shall be painted with required shade

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing structure as required. Upto 120 sq. mm

Febrication and errection work of iron and steel platform, column, bracing housting. Placing etc inculding cutting, hoisting , fixing in position and applying a priming coat of approved steel priper using structure steel etc as required for GOAB Structure, shed & For Trench Support

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:70 sq. mm

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 2.76 Mtr X 1.76 Mtr X 0.76 Mtr X 4 Nos = 14.76 CUM

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply & Fixing of Aluminium Unarmoured cable single core1100 voltage grade 35 sq mm

Supply & Fixing of Aluminium tub terminal 35 sq mm

Supply & Fixing of copper material, Tripod lightning conductor, 30 inch X 25mm X 50mm

Shifting & Installation Capacitor Bank & Switch by Providing man power

Dismantling of over head lines comprising of copper/ aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required.

Supply & Fixing of Support Connector ,aluminium alloy material, 48.60 mm size

Supply & Fixing of Post Insulator, 10KA, 11KV rated, standard size.

Supply & Fixing of T Connector, aluminium alloy material, 48.60 mm size.

Supply & Fixing of Nut & Bolts of diiferent size as required

Supply & Fixing of Pad / Palm Connector, aluminium alloy material, 48.60 mm X 12 mm size.

Supply & Fixing of Pipe to Pipe Connector,aluminium alloy material, 48.60 mm X 48.60 mm size

Supply & Fixing of Alloy aluminum pipe 48.3 mm dia inner dia 40.8mm wall thk 3.6mm

Supply & Fixing of Enamel Paint

Supply & Fixing of Red Oxide Paint

Total impact of GST for the purpose of CTC

M/S. PAWAN KUMAR (BID ID -1183213)