Material supply

Amount

Material

Stone for masonry work

Portland Cement

Coarse sand (zone III)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Sundries

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Adjustable span ESO+SI (2.35-3.40)

Second class kail wood in planks

Second class kail wood in scantling

Laterite stone of size 35x20x20cm

Stone Aggregate(single size):20 mm nominal size

Stone Aggregate(single size): 10 mm nominal size

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Twisted steel/deformed bars

Fine sand (zone IV)

Deharadun white lime

Plastic emulsion paint

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Pink primer (for wood)

Stone Aggregate(single size): 40 mm nominal size

Flats exceeding 10 mm in thickness

Mild steel plates

Mild steel rivets

20 mm dia holding down bolts

Synthetic enamel paint in black or chocolate shade

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 15 mm outer dia. 12kgf/cm2

Aracanut post

Bitumen washer

Corner angle 45x45x5 mm 2.50 long

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

GI trafford profile sheet 0.35mm thick

Gravel 1.5 mm to 2 mm

Gravel 5 mm to 10 mm

Mild steel tubes hot finished welded type

Solid blocks of size 30x20x15cm

Stainless steel screws 50 mm

Welding by electric plant

Wire nails

Quarry Waste