HEXAGON HEAD BOLT.

Special Eligibility Criteria

1. 1

   Bulk procurement of this item shall be strictly restricted to Micro and Small Enterprises (MSEs) that hold a valid BIS Licence for IS:1363 part 1 & part 3 both, in accordance with the notification published in The Gazette of India, CG-DL-E-180722024- 255511. Original Equipment Manufacturers (OEMs) intending to participate in the tender must submit a valid UDYAM Registration Certificate as proof of MSE status, along with a valid BIS Licence corresponding to the specified IS standard. Offers submitted without these documents shall be rejected.The authorized agents of MSE registered & BIS LICENCE holding manufacturer may quote along with tender specific authorization certificate and along with the valid UDYAM certificate for MSE & BIS Licence of the OEM who have given the authority certificate, failing which their offer shall be rejected. For further details regarding exemption and detailed guidelines, bidders are advised to refer to The Gazette of India, CG-DL-E- 180722024-255511, which is enclosed with the tender document. Note : Bidder asking exemption as mentioned in The Gazette of India, CG-DL-E-180722024-255511, has to submit past performance of satisfactory execution of contracts to SC Railway, or Other Zonal Railways/Pus for supply of the same / similar items (i.e Bolt or Nut of any size/dimension ) for a quantity of 20 percent or more of tendered quantity against a single contract during last three years prior to, and excluding tender opening date may be considered as responsive to SC Railways requirements for placement of bulk and regular order. Tenderers are requested to submit the past performance report such as Copies of R Notes/CRAC/Proof of acceptance of material by consignee etc. along with their offer; failing which offer will be summarily rejected without making any back reference. However, in cases where the tenderers are having satisfactory past supply performances of tendered items for stock items with SCR, the supply performance data available in iMMIS with SCR shall be taken into consideration while evaluating the offers of the tenderers.

   Document requiredConfirmation required
2. 2

   A) In Keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended,it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. B) Provisions of latest Rly Bd letter regarding Public Procurement (Preference to Make in India), Order 2017 - Revision vide Lr. No. 2020/RS(G)/779/2/Pt.1(E3322671) dt 20.08.2024 are applicable.

   Document optionalConfirmation required

Check List

1. 1

   Have you gone through the Instruction to tenderers and General Tender Conditions, etc., uploaded in IREPS by this Railway Having participated in the tender it will be considered that you have gone through all the conditions and the same are accepted by you.
2. 2

   Have you agreed to supply the tendered stores at the rates quoted by you in accordance with the IRS conditions of contract and in accordance with special and other conditions specified / attached with the tender.
3. 3

   Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you.Any variation in tax structure/rate due to introduction of ST, shall be dealt with under Statutory Variation Clause
4. 4

   Have you ensured that you have not quoted/uploaded any commercial /technical deviations/financial term in place other than specified in the tender enquiry as the same will not be considered and will be ignored. Any contract placed after ignoring such financial / commercial terms at the place other than the specified in tender enquiry will be binding on you.
5. 5

   Please go through SCR Instructions to Tenderers and General Conditions of Tender on IREPS website which are applicable, before submission of offer.

Commercial-Compliance

1. 1

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST /UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.[e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher taxbill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

   Document optionalConfirmation required
2. 2

   Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly.

   Document optionalConfirmation required
3. 3

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Document optionalConfirmation required
4. 4

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non-MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Document optionalConfirmation required
5. 5

   Offer should be kept valid for 90 days.
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received f o r quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.