Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L1 | Accepted-AOC Being lowest. | |
| 2 | L2₹29.3 L+₹57,811 (2.01%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹35.8 L+₹7.1 L (24.8%)Rejected-Finance C 234 ADG P CHENNAI | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2022_MES_563973_1
GE MAINT EZHIMALA 8524
Open Tender
Civil Works
Item Rate
120 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹69,800
Yes
28 Dec 2022
18 Nov 2022
16 Dec 2022
18 Nov 2022
14 Dec 2022
2 Dec 2022
19 Nov 2022 - 26 Nov 2022
Amount
Dismantling cabinets boarding, any description, fixed in any position with screws incl all fittings complete all as specified and as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for applying two coats of acrylic interior emulsion oil bound distember emulsion over a coat of primer over newly plastered surface including preperation complete all as specified and as directed.
S&F 18-20 mm thick multiwood board used as in kitchen cabinet fixed with screws to wall as required size and shape complete all as specified and as directed. Note:- Necessary fittings will be measured and paid separately under relevant items.
S&F stainless steel telescopic channel (600/450mm) drawers slides complete all as specified and as directed.
S&F stainless steel self closing hydraulic hinges 50mm size fully overlay fixed to shutter with SS screws complete all as specified and as directed.
S&F 75mm size extruded brass handles, fabricated type polished complete all as specified and as directed.
S&F in repair prelaminated particle board 18/19 thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work complete all as specified and as directed.
Refixing of shutters of any description not exc 1.50 sqm in same opening after easing and adjusting complete all as specified and as directed.
S&F in repairs continuous (piano) hinges mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and as directed.
S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed.
S&F in repairs 4 levers brass lock cupboard, grade 1, size 50mm complete all as specified and as directed.
S&F in repairs 75mm long aluminium handles, cast type, anodised complete all as specified and as directed.
S&F in repairs hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.
M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.
S&F magnetic steel stopper catcher holder for cub board of appropriate shape and size (50mm) complete all as specified and as directed.
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each and refixing in same position complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank of capacity 750 ltr including all fittings connected to existing tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 4923-1968 Grade St-240 of square or rectangular tube complete all as specified and as directed. Note:- The scope of work is to be carried out from ground level to nearly upto 15 metres of height, contractors should arrange necessary scaffolding and takes all safety precautions for workers at the time of carrying out works.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A) including necessary cutting in wall complete all as specified and as directed.
S&F MS anchor fasteners of size 12mm dia. and 100mm length for fixing the plates to the wall surface complete all as specified and as directed. Make:- Hilti or equivalent as approved by GE.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated/ tile pattern steel sheet 0.50mm thick of any colour (matching to existing ) having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for providing cement concrete in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof slab padding, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, type B1, 1:2:4 using 20 mm graded aggregate complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605mm complete all as specified and as directed.
M&L for 4mm thick prepainted non-asbestos fibre cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables( heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables( heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and as directed.
M&L for sub main wiring using 4 runs of 16 sqmm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through PVC casing caping along with 2 run of 16 sqmm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed by Engg-in-charge. (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Six runs of cable and one run of casing & capping with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
Supply and fix in replacement of enclosed automatic transfer switch of capacity 160 Amps , wall mounted type and suitable for insert 120 sqmm cable with gland for cabling complete all as specified and directed by Engr-in-charge. Make:- L&T Model /Cat No CK90162BSOO or equivalent in Havells/C&S/ Schneider.
Supply and fix in replacement of manual on load changeover switch with sheet metal enclosure of capacity 250 Amp , wall mounted type and suitable for insert 300 sqmm cable with gland for cabling complete all as specified and directed by Engr-in-charge. Make:- L&T Model /Cat No CO32500OSOO or equivalent in Havells/C&S/ Schneider.
M&L for Point wiring complete as specified with 1100 volt grade confirming to IS 694, 1.5sq.mm. (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through and including rigid PVC casing and capping of suitable size and all accessories fixed to the chase on the wall etc , with all fittings, fixed on wall/ceiling /floor including modular box and modular cover plates suitable for housing modular pattern switches/sockets/regulators etc and duly earthed with same cable as for point wiring above but green in colour as continuous earthing wire complete all as specified & directed by Engineer-in-Chrage. Notes:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (iv) Cutting of chases on the wall and filling with cement mortar after fixing of conduit shall deemed to be included in the quoted rate.
(a) One light point controlled by one modular switch 5 Amps one way.
(b) One 5 pin modular 5 Amps socket outlet on independent board.
All as per srl item No.37 above but using cable size 2.5 sqmm for 15 Amps socket outlet terminal boxes for modular switches including accessories as modular surface cover plate with frame, metal flush box with 2.5 sqmm earth wire complete all as specified and directed.
S&F modular type AC box with socket plug top and MCBs single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
S&F modular switch one way 6 Amps single pole 1 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular switch one way 16 Amps single pole 2 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular socket outlet shuttered 6A, 2/3 pin universal indian module complete all as specified and directed by Engineer-in-Charge.
S&F modular socket outlet shuttered 6/16A, 2/3 pin universal indian module complete all as specified and directed by Engineer-in-Charge.
S&F 1x34W high effficiency 2x2 recess mounting LED light fitting with glare free homogeneous illumination including LED driver with all accessories internally prewired, connecting up with twin core twisted flexible copper conductor cable white colour complete all as specified and directed by Engineer-in-Charge.
S&F sheet steel enclosure with double door, vertical type MCB DB for MCB's fitted with busbars, earth bar and neutral links with provision of MCCB, 4-Pole as incomer and TP/SP MCBs as outgoing 415 volts, 8 way, IP 43-IK 09 protection complete all as specified and directed by Engineer-in-Charge. Note:- MCCB incomer is deemed to be included in the quoted rate.
Supply and fixing MCB single pole 240 volts, 6-32amps, 10KA , C-Curve complete all as specified and directed by Engineer-in-Charge.
M&L for sub main wiring using 2 runs of single core 1 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including rigid non-metallic PVC conduit / casing caping including all specials like joint elbow, Tee, junction, bend etc along with 2 runs of 2 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed by Engineer-in-Charge. Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Four runs of cable and one run of PVC conduit /casing & capping with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
M&L for sub main wiring using 4 runs of single core 10 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including rigid non-metallic PVC conduit / casing caping including all specials like joint elbow, Tee, junction, bend etc along with 2 runs of 6 sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed by Engineer-in-Charge. Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Six runs of cable and one run of PVC conduit /casing & capping with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
KDR CONSTRUCTION
GMS Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .