Work of Construction of 33 KV Lines at 3 places under the area of EDD-II Ballia on semi-turnkey basis (under Additional Business plan 2024-25)

Supply of following decentralised materials as per RESSPO/PuVVNL norms at the work site.

Top Channel 125x65 mm 3200 mm with clamp

Channel for extension of pole 125x65 mm 2400 mm with double clamp

33 kv Jointing kit 3x300 sq mm XLPE HS O/D

33 KV Steel Cross arm 100x50 MM V-Type

33 KV MS Channel T-off

33 KV Clamp for T-off With N/B

Danger bord with clamp for 33 kv

Pg Clamp For Rod

33 KV Composite Polymer Pin Insulator

GiGSS wire/ Earth wire (Unit MT)

11 kv Stay Loop Insulator

Composite Poly Disc Insulator 70 KN B&S

Stay Wire 7/10 SWG

Cross arm Holding Clamp

Earth Rod 20x1800 MM

Saty Rod 20x1800 MM

Straight Through

Ms Angle Iron 65x65x6 mm, 4300 mm Long Bracing with Clamp

Stone Pad (300x300x75 MM)

Disc Insulator B&S Type

Disct fitting

33 KV Pin Insulator

33 KV Pin with Nuts

Comlete Stay ( GI Stay Rod 20x1800 MM Stay Wire 7/8 SWG 10 Kg. Stay Clamp Bolt Nut & Washer with Concerte Grounting)

Earthing of Pole by Ms Earthing Rod of 20x2500 MM and 6 SWG Earthing wire ETC

33 KV Bus Isolator

Clamp for Top with N/B

Shifting,loading ,carriage& unloading of following materials on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site .

S.T. Pole 11 M long IS-410 SP-55

S.T. Pole 13 M long.

ACSR ‘Dog’ Conductor

33 KV ‘XLPE’ Cable 3x300mm² (900x2) mtr

Work of following materials as per RESSPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Single pole structure on 13 mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm,/side arm with clamps with bolt and nut, composite polymer pin, insulator. complete as per RESSPO Norms).

Erection of Double pole structure on 11 Mtr ST Pole including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Erection of Four pole structure on 11 Mtr ST Pole/PCC Pole 9Mtr including all works of evocation of pit, pole erection & fitting of all accessories top channel 125 x 65 x 3200 mm with clamps complete,disc insulater with fitting,etc as per RESSPO Norms) .

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per RESSPO Norms

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. ( Rate as per site due to heavy tree branches cuttung, loading ,carriage and unloading of tree branches from work site to forest department site store/office)

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per RESSPO Norms

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² S/T

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) of Double cable by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method as per site required.

Fabrication work of PCC 9 Mtr for different crossing work in construction of line as per required by 33 KV Top channel with all clamps after providing etc complete work work.

Earthing of poles by MS earthing rod 20x2500 mm with GI Wire as per RESSPO Norms

Concriting of poles as per RESSPO Norms

Making plinth for Poles as per RESSPO Norms

Fixing of danger boards on poles as per RESSPO Norms

Fixing of Barbed wire on poles as per RESSPO Norms

Painting of ST Poles as per RESSPO Norms by red oxide paint & Alluminium paint by two coats .

Fitting of 33 KV MS Bracing angle on Double pole , TRI-Pole & four Pole

Jumpering of 33 KV Cable to overhead 33 KV Line by Alluminium Lug & PG Clamp for dog wityh complete work.( 1 Job=1 No D/P)

Fixing of PG Clamps

MILAN CONTRUCTION WORK

PRAVEEN CONSTRUCTION AND SUPPLIER