64/EDCB/2021-22

Amount

The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-II, Bareilly. Approx. distance upto 30 Km. Including safe loading and unloading.

ST Pole 11 Mtr

ST Pole 09 Mtr

PCC Pole 8.5 Mtr

11 KV XLPE Cable 3x185 Sq mm

11 KV XLPE Cable 3x70 Sq mm

33 KV XLPE Cable 3x300 Sq mm

Cable Box for 11 KV XLPE Cable 3x185 Sq mm

Cable Box for 11 KV XLPE Cable 3x70 Sq mm

Cable Box for 33 KV XLPE Cable 3x300 Sq mm

Straight Through Cable Jointing Kits for 11 KV XLPE Cable 3x185 sqmm

Straight Through Cable Jointing Kits for 33 KV XLPE Cable 3x300 sqmm

ACSR Dog Conductor

ACSR Weasel Conductor

LT AB Cable 3x120 sqmm

LT AB Cable 3x95 sqmm

LT AB Cable 3x50 sqmm

LT AB Cable 3x16 sqmm

11/0.4 KV 3 Phase 25 KVA T/F

11/0.4 KV 3 Phase 250 KVA T/F

Other Line material i.e., 33 KV & 11 KV pin insulater/stay/earthing complete/Disc Fitting/Disc Insulators/Dropper Channel/Crossing Bracing/ Top Channel/Binding Wire/Danger Board/Barbed Wire/numberplate/stone pad/Control Cable etc

Construction of T/F plinth 1.5x1.5x2 m3 for mounting 250 KVA T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4” thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect

Cage fencing of 250 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattle accidents by fabrication of cage (1 Inch Sq wiremesh) made of 10 No gauge in suitable size angle iron frame of size 7.5'(L)x5'(W)x8’(H) by strenghtening of wire mesh 20x3 mm M.S. flat haorizentally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint). The wire mesh should be earthed with 50x6 mm MS earthing strip with existing earthing of Transformer Body. All men, material and T&P provided by the contractor to complete the fabrication, transportation and installation.

Mounting of Following Capacity Transformers as per norms complete in all respect -

25 KVA T/F

250 KVA T/F

Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms

PCC Pole 8.5 Mtr long (Single)

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

ST Pole 9 Mtr long (Single)

Four Pole Structure as per norms

Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms

PCC Pole 8.5 Mtr long (Single)

ST Pole 11 Mtr long (Single)

ST Pole 11 Mtr long (Double)

ST Pole 9 Mtr long (Single)

Four Pole Structure as per norms

The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms

Laying, Stringing & Sagging of Following Conductor complete in all respect

ACSR Weasal Conductor

ACSR DOG Conductor

Arial Bunched Conductor (3x120 sqmm)

Arial Bunched Conductor (3x95 sqmm)

Arial Bunched Conductor (3x50 sqmm)

Arial Bunched Conductor (3x16 sqmm)

Under ground laying of 11 KV XLPE 3x185 sq mm cable in Double circuit by drill method to Double pole situated at both sides in all respect.

Under ground laying of 11 KV XLPE 3x70 sq mm cable in Double circuit by drill method to Double pole situated at both sides in all respect.

Under ground laying of 33 KV XLPE 3x300sq mm cable in Double circuit by drill method to Double pole situated at both sides complete in all respect.

Hoisting of 33 KV XLPE Cable (3x300 sqmm) on double pole bote with GI pipe of size 6 " dia 4 Mtr long including the jumpering complete with clamps , nut and bolts.

Hoisting of 11 KV XLPE Cable (3x185 Sqmm) on double pole bote with GI pipe of size 6" dia 4 Mtr long including the jumpering complete with clamps , nut and bolts

Hoisting of 11 KV XLPE Cable (3x70 Sqmm) on double pole bote with GI pipe of size 6" dia 4 Mtr long including the jumpering complete with clamps , nut and bolts

Supply & Laying of 6" dia G Pipe at various places i.e road crossing & Hoisting etc. complete in all respect ((ISO certified GI pipe 150 NB 3 mm thick dia 6" would be Provided by contractor at his own cost)

Fixing of 11 KV Cable Boxes for 3x185 sqmm XLPE Cable complete in all respect

Fixing of 11 KV Cable Boxes for 3x70 sqmm XLPE Cable complete in all respect

Fixing of 33 KV Cable Boxes for 3x300 sqmm XLPE Cable complete in all respect

Fixing of 11 KV Straigh through Jointing Kits for 3x185 sqmm XLPE Cable complete in all respect

Fixing of 33 KV Straigh through Jointing Kits complete in all respect

The work of digging of pits, erection of Stay Clamp, Insulator etc.

Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.

Fixing of 3 Phase Distribution Box complete in all respect

Fixing of 1 Phase Distribution Box complete in all respect

Guarding at road crossing complete in all respect

Safe back carriage of Scrap (if any) from work site to C.B. Ganj store Bareilly approx distance upto 30 Km including safe loading & unloading.

Cutting of Tree Branches

Anil Kumar Yadav