Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC MAHABHAIRAB PO TEZPUR DISTT SONITPUR ASSAM PIN 784 001 | SONITPUR | ASSAM | 784001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹35.3 L+₹91,648 (2.66%)Rejected-Finance H NO 18 BY LANE NO 09 SATGAON PRAGATI NAGAR GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L2 | Rejected-Finance Not being lowest bidder | |
| 3 | L3₹37.6 L+₹3.2 L (9.34%)Rejected-Finance | L3 | Rejected-Finance Not being lowest bidder | |
| 4 | L4₹38.4 L+₹4.0 L (11.7%)Rejected-Finance | L4 | Rejected-Finance Not being lowest bidder | |
| 5 | L5₹38.5 L+₹4.1 L (11.8%)Rejected-Finance WZ 409 0 B 1ST FLOOR PLOT NO 12 JANAK PARK HARI NAGAR NEW DELHI 110064 | NEW DELHI | WEST DELHI | DELHI | 110064 | L5 | Rejected-Finance Not being lowest bidder |
| Sl No | Description | Qty | Unit | Flint India L5 | Shri Harendra Kumar Rai L4 | D G Corporation L1 | SHANKAR ENTERPRISE L2 | M/S S K ENTERPRISES L3 | Chinmay Traders L8 | M/S SEWAK SINGH L7 | M/S N S CONSTRUCTION L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour to lifting and lowering to submersible pump motor set Capacity 7.5 HP to 12.5 HP with column pipe and submersible cable including disconnecting electric connection carefully from panel board, old heavy duty flanged column pipe in 100/80 mm dia, minimum length 30mtrs to as site in 3mtrs pieces, bolts nuts washers, rubber gasket etc with supply and fixing new nutt, bolts, washer, rubber gasket in suitable to 100 mm flange joints etc with all other necessary site required work for making functional to submersible pump motor set of following capacity, Complete all as specified and as directed.
Note:- Quoted rate shall deemed to be included cost of
(i) Length of column pipe of required size and quantity of nut, bolts, washers and gasket.
(ii) Required tools and plants shall be arrange by contractor.
(iii) Repair of motor/pump/submersible cable shall be measured and paid under relevant item of schedule. | 12 | Each Job | 10,700 ₹1,28,400 | 4,000 ₹48,000 | 5,000 ₹60,000 | 5,000 ₹60,000 | 4,800 ₹57,600 | 5,000 ₹60,000 | 20,000 ₹2,40,000 | 2,500 ₹30,000 Lowest |
| 2.00 | All as per item No 1 above but capacity of motor 15HP to 25 HP, Complete all as specified and as directed. | 13 | Each Job | 15,300 ₹1,98,900 | 4,200 ₹54,600 | 6,000 ₹78,000 | 6,000 ₹78,000 | 4,900 ₹63,700 | 6,000 ₹78,000 | 20,000 ₹2,60,000 | 2,500 ₹32,500 Lowest |
| 3.00 | Labour for de-coupling, dismantling the submerseable motor capacity of motor 2 to 5 HP 3 Ph, 415 Volt body carefully as GM/Brass impeller, neck ring, bowl assebly, bushes, coupling, lock, sand cap, CI intermediate bowl, S/S pump shaft etc, checking and segregating serviceability, for replacing of defected parts, cleaning thoroughly by approved method of heating, drying, varnishing to winding using good quality of insulating materials, re-assembling testing and commissioning after replacing defected spaires etc complete all as specified and directed Note :- (i) Replaced spaire parts will be paid separately under relevant item of schedule. (ii) Quoted rate shall be included the cost of re-assembling, marking SM, MES or srl No etc (iii) Transport charges to workshop and return back to site (iii) Repair,servicing, checking, machine work what ever is reqd cutting,grinding, polishing etc other all related site required work. | 5 | Each Job | 5,000 ₹25,000 | 3,800 ₹19,000 | 1,500 ₹7,500 | 2,000 ₹10,000 | 1,000 ₹5,000 Lowest | 2,000 ₹10,000 | 2,000 ₹10,000 | 2,000 ₹10,000 |
| 4.00 | All as per item No 3 above but capacity of motor 7.5 to 12.5 HP 3 Ph, 415 Volt Complete all as specified and as directed. | 10 | Each Job | 7,000 ₹70,000 | 4,800 ₹48,000 | 2,000 ₹20,000 Lowest | 3,000 ₹30,000 | 2,000 ₹20,000 Lowest | 3,000 ₹30,000 | 2,500 ₹25,000 | 3,100 ₹31,000 |
| 5.00 | All as per item No 3 above but capacity of motor 15 to 25 HP, 3 Ph, 415 Volt, Complete all as specified and as directed. | 12 | Each Job | 8,000 ₹96,000 | 6,800 ₹81,600 | 2,500 ₹30,000 | 4,000 ₹48,000 | 2,300 ₹27,600 Lowest | 4,000 ₹48,000 | 3,000 ₹36,000 | 3,600 ₹43,200 |
| 6.00 | M&L for cutting and removing the burnt windings from the Submersible motor capacity of 2 to 5 HP, 3 Phase, 415 Volt body ,supply and rewinding the same above items using existing size /gauge/ qty of insulated supperior quality water proof copper winding wire of suitable size/gauge and nos of turns using insulating materials and submersible copper cable in suitable size required Lenght outside minimum 1.5 Mtrs, re-assembling ,full load testing, heating, drying , varnishing, overhauling,re-installation, commissioning, testing and connecting up complete all as existed following capacity, Complete all as specified and as directed.
Note:- (i) Necessary testing shall be done by contractor after lowering in borewell at site. (ii) Quoted rate are included cost of cutting, removing, welding of motor body for making functional of pump set. | 5 | Each Job | 6,400 ₹32,000 | 5,800 ₹29,000 | 4,000 ₹20,000 Lowest | 6,000 ₹30,000 | 5,000 ₹25,000 | 6,000 ₹30,000 | 6,500 ₹32,500 | 5,999 ₹29,995 |
| 7.00 | All as per item No 6 above but capacity of motor 7.5 to 12.5 HP, 3 Ph, 415 Volt Complete all as specified and as directed. | 10 | Each Job | 9,300 ₹93,000 | 9,800 ₹98,000 | 8,500 ₹85,000 | 10,000 ₹1,00,000 | 15,000 ₹1,50,000 | 10,000 ₹1,00,000 | 15,000 ₹1,50,000 | 7,500 ₹75,000 Lowest |
| 8.00 | All as per item No 6 above but capacity of motor 15 to 20 HP, 3 Ph, 415 Volt, Complete all as specified and as directed. | 8 | Each Job | 15,600 ₹1,24,800 | 17,800 ₹1,42,400 | 13,000 ₹1,04,000 Lowest | 15,000 ₹1,20,000 | 18,000 ₹1,44,000 | 18,000 ₹1,44,000 | 15,500 ₹1,24,000 | 17,000 ₹1,36,000 |
| 9.00 | All as per item No 6 above but capacity of motor 22.5 to 25 HP, 3 Ph, 415 Volt, Complete all as specified and as directed. | 5 | Each Job | 17,900 ₹89,500 Lowest | 18,900 ₹94,500 | 18,000 ₹90,000 | 18,000 ₹90,000 | 19,000 ₹95,000 | 18,000 ₹90,000 | 20,000 ₹1,00,000 | 18,000 ₹90,000 |
| 10.00 | Supply and fix in replacement Butterfly valve size of 150mm dia bore ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete including dismantling and removing/taking out old unserviceable complete all as specified and directed. | 4 | Each | 5,100 ₹20,400 | 8,800 ₹35,200 | 5,000 ₹20,000 Lowest | 9,000 ₹36,000 | 10,500 ₹42,000 | 9,500 ₹38,000 | 6,500 ₹26,000 | 7,300 ₹29,200 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
30 Sept 2025, 6:00 pmClosed
GE South Tezpur
GE South Tezpur Mission Chariali
REPAIRS/MAINT AND IMPROVEMENT OF CENTRIFUGAL, SUBMERSIBLE MONO BLOCK PUMP AND MOTOR STARTER/PANELS AND ALLIED WORKS UNDER GE (S) TEZPUR
2025_MES_728666_1
9062
Open Tender
Civil Works
Item Rate
210 days
GE South Tezpur
as per NIT
4 documents required · 4 mandatory
₹500
GE South Tezpur
₹96,000
Yes
28 Nov 2025
2 Sept 2025
2 Oct 2025
2 Sept 2025
30 Sept 2025
16 Sept 2025
2 Sept 2025 - 9 Sept 2025
Amount
Material and labour to lifting and lowering to submersible pump motor set Capacity 7.5 HP to 12.5 HP with column pipe and submersible cable including disconnecting electric connection carefully from panel board, old heavy duty flanged column pipe in 100/80 mm dia, minimum length 30mtrs to as site in 3mtrs pieces, bolts nuts washers, rubber gasket etc with supply and fixing new nutt, bolts, washer, rubber gasket in suitable to 100 mm flange joints etc with all other necessary site required work for making functional to submersible pump motor set of following capacity, Complete all as specified and as directed. Note:- Quoted rate shall deemed to be included cost of (i) Length of column pipe of required size and quantity of nut, bolts, washers and gasket. (ii) Required tools and plants shall be arrange by contractor. (iii) Repair of motor/pump/submersible cable shall be measured and paid under relevant item of schedule.
All as per item No 1 above but capacity of motor 15HP to 25 HP, Complete all as specified and as directed.
Labour for de-coupling, dismantling the submerseable motor capacity of motor 2 to 5 HP 3 Ph, 415 Volt body carefully as GM/Brass impeller, neck ring, bowl assebly, bushes, coupling, lock, sand cap, CI intermediate bowl, S/S pump shaft etc, checking and segregating serviceability, for replacing of defected parts, cleaning thoroughly by approved method of heating, drying, varnishing to winding using good quality of insulating materials, re-assembling testing and commissioning after replacing defected spaires etc complete all as specified and directed Note :- (i) Replaced spaire parts will be paid separately under relevant item of schedule. (ii) Quoted rate shall be included the cost of re-assembling, marking SM, MES or srl No etc (iii) Transport charges to workshop and return back to site (iii) Repair,servicing, checking, machine work what ever is reqd cutting,grinding, polishing etc other all related site required work.
All as per item No 3 above but capacity of motor 7.5 to 12.5 HP 3 Ph, 415 Volt Complete all as specified and as directed.
All as per item No 3 above but capacity of motor 15 to 25 HP, 3 Ph, 415 Volt, Complete all as specified and as directed.
M&L for cutting and removing the burnt windings from the Submersible motor capacity of 2 to 5 HP, 3 Phase, 415 Volt body ,supply and rewinding the same above items using existing size /gauge/ qty of insulated supperior quality water proof copper winding wire of suitable size/gauge and nos of turns using insulating materials and submersible copper cable in suitable size required Lenght outside minimum 1.5 Mtrs, re-assembling ,full load testing, heating, drying , varnishing, overhauling,re-installation, commissioning, testing and connecting up complete all as existed following capacity, Complete all as specified and as directed. Note:- (i) Necessary testing shall be done by contractor after lowering in borewell at site. (ii) Quoted rate are included cost of cutting, removing, welding of motor body for making functional of pump set.
All as per item No 6 above but capacity of motor 7.5 to 12.5 HP, 3 Ph, 415 Volt Complete all as specified and as directed.
All as per item No 6 above but capacity of motor 15 to 20 HP, 3 Ph, 415 Volt, Complete all as specified and as directed.
All as per item No 6 above but capacity of motor 22.5 to 25 HP, 3 Ph, 415 Volt, Complete all as specified and as directed.
Supply and fix in replacement Butterfly valve size of 150mm dia bore ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete including dismantling and removing/taking out old unserviceable complete all as specified and directed.
All as per item No 10 above but size of 100mm dia bore, complete all as specified and directed.
All as per item No 10 above but size of 80mm dia bore, complete all as specified and directed.
Disconnecting only suction and discharge connection of centrifugal pump by de coupling , removing pumps form its existing foundation of capacity Pump 25000 GPH with 25 Mtr head (20 to 25 HP). Dismantling the pump carefully checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly for re using including supply and replacement of unserviceable parts as required, complete all as specified and directed. Note :- (i) The replaced spaires will be measured and paid under rlevant item of schedule. Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting and testing complete all as directed . (ii) Unit rate shall be included the transportation charges from site to workshop and back (if required).
All as per item No 13 above but capacity of 20000 GPH with head 30mtr (15 HP), complete all as specified and directed.
All as per item No 13 above but capacity of 15000 GPH with head 25mtr (12.5 HP), complete all as specified and directed.
All as per item No 13 above but capacity of 10000 GPH with head 25mtr (7.5 to 10 HP), complete all as specified and directed.
All as per item No 13 above but capacity of 6000 GPH with head 25mtr (1 to 5 HP), complete all as specified and directed.
M&L for re-winding to burnt out centrifugal motor body primary winding as same in existing size/guage/no of turns/qty or insulation etc, capacity of motor 20 HP to 25 HP 3 Ph, 415 Volt, using superior quality water proof copper winding wire and submersible copper cable in required length and size to make connection upto outside 1.5 mtrs minimum including re assembling, full load testing, heating, drying varnishing, overhulling, re-installation, commisioning, testing and connecting up complete all as existed following capacity all as directed. Note:- (i) Necessary testing shall be done by contractor after Re-assembling in borewell at site. (ii) Quoted rate are included cost of cutting, removing, welding of motor body for making functional of pump.
All as per item No 18 above but capacity of motor 15 HP 3 Ph, 415 Volt, complete all as specified and directed.
All as per item No 19 above but capacity of motor 12.5 HP 3 Ph, 415 Volt, complete all as specified and directed.
All as per item No 19 above but capacity of motor 7.5 to 10 HP, 3 Ph, 415 Volt, complete all as specified and directed.
All as per item No 19 above but capacity of motor 1 to 5 HP, 3 Ph, 415 Volt, complete all as specified and directed.
S & F in replacement of 3/4 pole contractor of 32-50 amp complete all as specified and directed
S & F in replacement of 3/4 pole contractor of 16-25 amp complete all as specified and directed
M&L for painting to MS pipe line/MS Sheet of valve chamber not otherwise described over 10 cm width or girth and applying one coat of red oxide primer and two coats of coal tar epoxy paint complete all as specified and directed.
S & F in replacement of cast iron non return valve for 150 mm dia pipe ISI marked with GM flap and seat complete flanged at both ends including jointing and jointing material such as bolts nuts, washers, rubber gasket complete all as specified and directed.
All as per Item No 26 above but for size 100 mm dia pipe, complete all as specified and directed.
All as per Item No 26 above but for size 80 mm dia pipe, complete all as specified and directed.
S & F in replacement of Sluice valve of size 150mm dia CI body with Gun metal/Steel spindle with hand operated iron wheel both ends flanged and drilled including ring, nuts, bolts class PN 1.6 conforming to IS 14846-2000. ISI Marked of following sizes complete all as specified and directed.
All as per item No. 29 above but for 100 mm dia, complete all as specified and directed.
All as per item No. 29 above but for 80 mm dia, complete all as specified and directed.
S & F in replacement of submerisible flat copper cable conductor 3 core 10 Sqmm 1100 volts grade ISI marked heavy duty complete all as specified and directed.
All as per item No. 32 above but for 3 core 16 Sqmm, complete all as specified and directed.
Supply only Pump shaft stainless steel sleev suitable size for 7.5 to 12.5 HP submersibale pump complete all as specified and directed.
All as per item No. 34 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 34 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Impeller gun metal/Brass of suitable for 2 HP to 5 HP submersible pumps complete all as specified and directed.
All as per item No. 37 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 37 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 37 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Shaft key of sizes upto 25 Hp suitable for submersible pump, complete all as specified and directed.
Supply only Neck ring gun metal of suitable for submersible pump size of 2 to 5 HP complete all as specified and directed.
All as per item No. 42 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 42 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 42 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Gun metal bowl bushes suitable for submersible pump of 2 HP to 5 HP complete all as specified and directed.
All as per item No. 46 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 46 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 46 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Cast iron suction /discharge case bowl of suitable for submersible pump size of 2 HP to 5 HP complete all as specified and directed.
All as per item No. 50 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 50 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 50 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Cast iron inter mediate bowl of suitable for submersible pump size of 7.5 HP to 12.5 HP complete all as specified and directed.
All as per item No. 54 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 54 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only sand guard suitable for submersible pump set any size/capacity complete all as specified and directed.
Supply only Cast iron thrust bearing sleev upper and lower of suitable for submersible motor size of 2 HP to 5 HP complete all as specified and directed.
All as per item No. 58 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 58 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 58 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only Gun metal bushing upper and lower suitable for submersible motor size of 2 HP to 5 HP complete all as specified and directed.
All as per item No. 62 above but for size 7.5 to 12.5 HP, complete all as specified and directed.
All as per item No. 62 above but for 15 to 20 HP, complete all as specified and directed.
All as per item No. 62 above but for 22.5 to 25 HP, complete all as specified and directed.
Supply only motor coupler sleeve with key suitable for submersible motor of size upto 25HP complete all as specified and directed
S & F in replacement of borewell cap made out by 6 mm thick cast iron plate to cover the borewell casing pipe size upto 250 mm openable in two piece with nut, bolt and washer, making a hole in centre suitable fot 100mm column pipe including necessay jointing, cutting, welding etc complete all as specified and directed.
S & F in replacement of unserviceable PE tubing 08/12 complete all as specified and directed.
S & F in replacement of Submersible Pump Starters In Sheet Enclosure Type MU-G30H Fully Automatic Star - Delta Starter suitable for 25 to 27 HP Motor, 415V, 50 Hz, 3 phase Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Protections Offered - Overload, Single Phasing, Phase reversal, Phase imbalance, Auto Restart Feature, Vibration proof enclosure with IP54 protection class, Indications Offered - ON/OFF, Voltage and Ampere, complete all as specified and directed.
S & F in replacement of Submersible Pump Starters In Sheet Enclosure Type MU-G2OH Fully Automatic Star - Delta Starter suitable for 20 HP Motor, 415V, 50 Hz, 3 phase Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Protections Offered - Overload, Single Phasing, Phase reversal, Phase imbalance, Auto Restart Feature, Vibration proof enclosure with IP54 protection class, Indications Offered - ON/OFF, Voltage and Ampere, complete all as specified and directed.
S & F in replacement of Pump Starters In Sheet Enclosure Type MU-G2OH Fully Automatic Star - Delta Starter suitable for 15 HP Motor, 415V, 50 Hz, 3 phase Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Protections Offered - Overload, Single Phasing, Phase reversal, Phase imbalance, Auto Restart Feature, Vibration proof enclosure with IP54 protection class, Indications Offered - ON/OFF, Voltage and Ampere, complete all as specified and directed.
S & F in replacement of unserviceable needle valve 15 mm dia made out of steel, complete all as specified and directed.
S & F in replacement of 'O' Ring, Gasket set for valve body and gasket connection for body, complete all as specified and directed.
S & F in replacement of cast iron Water seal for motor of capacity 1 to 25 HP motor, complete all as specified and directed
Dismantling of air compressor 2 - 3 CFM capacity upto 2.0 HP motor, transporting to workshop, dismantling complete, overhauling,supply and replacement of unserviceable parts, metalling/grinding and polishing of rotary fan, replacing gasket, toping up compressor oil upto the level re-assembling installing, connecting, commissioning and testing, complete all as specified and directed.
S & F in replacement of Ball bearing No-6305 complete all as specified and directed. Make : NBC/SKF/TATA
S & F in replacement of Ball bearing No-6306 complete all as specified and directed. Make : NBC/SKF/TATA
S & F in replacement of Ball bearing complete all as specified and directed. No-6307 Make : NBC/SKF/TATA
S & F in replacement of Ball bearing No-6308 complete all as specified and directed. Make : NBC/SKF/TATA
S & F in replacement of Motor terminal box for 3 Hp to 20 Hp motor complete all as specified and directed.
S & F in replacement of PVC Fan blade suitable for Centrifugal motor complete all as specified and directed.
S & F in replacement of Rubber coupling, No P x 45 (tyre coupling) suitable for Pump and motor complete all as specified and directed.
S & F in replacement of Rubber coupling, D-50/70/80, (tyre coupling) suitable for Pump and motor complete all as specified and directed.
S & F in replacement of coupling bolt made of stainless steel with nut and washer suitable for Pump and motor 3 hp -12.5 Hp complete all as specified and directed.
S & F in replacement of coupling bolt made of stainless steel with nut and washer suitable for Pump and motor 15-27 Hp complete all as specified and directed.
S & F in replacement of old unsv MS flanged column pipe 100 mm dia medium grade having length 10 feet long both ends flanged and thick 4.8 mm, nut , bolts and washers complete all as specified and directed.
Taking down unserviceable Base frame of centrifugal/mono block Pumping set of any size and type and replace the same with newly fabricaed base frame made out of ms channel of same size duly painted including nuts bolts and washers complete all as specified and directed.
Supply, fixing and lowering 100 mm bore GI column pipe heavy grade both end flanged, 3.00 metre long, fitted with flanges at both ends made out of heavy garde pipes of not less than 6mm wall thickness ISI marked (IS: 3589 (1981) complete with bolts , nuts, gaskets etc as required complete all as specified and directed.
All as per item No 88 but for 80 mm dia pipe, complete all as specified and directed.
M&L in replacement for flanged joint suitable for 150 mm dia CI/DI pipe and fittings joints with rubber fiber board gasket complete all as specified and directed Note :- only rubber fibre board gasket will be changed to make flanged joint serviceable.
All as per item No 90 but for size 100 mm dia pipe, complete all as specified and directed.
All as per item No 90 but for size 80 mm dia pipe, complete all as specified and directed.
S & F in replacement of DOL Starter, for 415 V,10 to 15 HP centrifugal pump with overload relay rang (14-20) Amps with IP54 protection class with ON OFF inuctionand including taking down 15 HP motor stater, Complete all as spacified and directed.
S & F in replacement of Starter, for 415 V,5 to 7.5 HP centrifugal pump with overload relay rang (6-9.3) Amps with IP54 protection class with ON OFF inuction, and including taking down 5 HP motor stater, Complete all as spacified and directed.
S & F in replacement of gasket packing sheet in original 6 mm thick in size 2mtr x 2mtr for making packing to column pipe as requied size complete all as specified and directed
M&L for Rubber gasket joint in position including taking out old Rubber gasket joint of 100 mm dia flanged pipe, complete all as specified and directed.
M&L for Rubber gasket joint in position including taking out old Rubber gasket joint of 80 mm dia flanged pipe, complete all as specified and directed.
Material & labour for Plain Cement Conerete 1 : 3 : 6 type C2 using 40 mm graded stone agregate as in foundation/platform of pump set/pump panel & other works at different pump house, complete all as specified and as directed.
Demolition of existing unreinforced PCC, complete all as specified and as directed.
Repairs and maintenance of Chemical Dozing pumps of any make and capacity including replacement of defective / unserviceable suction/discharge pipe 3/8", duck bill & connecting nut 3/8" etc after taking out the old ones with new ones complete all as specified and directed. Note :- 1) Cost of minor repairs / replacement of minor spares such as nuts, bolts, washers etc. are deemed to be included in the unit quoted rates. 2) The cost of transportation to nearest workshop & back after repair if necessary is deemed to be included in the unit quoted rates.
Supply only of spares / components for chemical Dozing pumps Tube, complete all as specified and as directed.
Supply only of spares / components for chemical Dozing pumps Injection check valve, complete all as specified and as directed.
Supply only of spares / components for chemical Dozing pumps Foot valve 3/8", complete all as specified and as directed.
Supply only of spares / components for chemical Dozing pumps Connecting Nut with adapter 3/8", complete all as specified and as directed.
Decarbonising/ cleaning of Existing LT panel cubical type of various sizes consists of bus bar and circuit chamber, metering chambers CTs and relays chambers, checking the bus bar joints, bus bar and circuit spouts, cleaning and applying Anti - Track Busbar Insulation Tape to the bus bars , checking the current transformer, applying Monoplast compound at the bus bar joints after tightening of joints ,replaced new suiable size of lugs /suitable copper control cable and reassembling , if any rusted sheet replced with new sheet as per existing size complete all as specified and directed Note:- Cost of lubricant/ cleaning agents (CRC & rust remover) / hardware like springs/ bolts/ nuts/ washers,lugs/ suitable copper cables cost of labour, T&P required for replacement shall be etc. shall be deemed to be included in the rate quoted, complete all as specified and as directed.
S & F in replacement of LED indicating Lamps for R, Y, B phases complete including taking down ols U/S lamp complete all as specified and directed.
M&L and fixing in replacement of Digital Ameter ranee 500 Amps with CTs, complete all as specified and directed.
M&L for Painting of MGF/ACF/ IRF Oxydation chember with two coat of synthetic enamel paint, sky blue colour, marking of filter with using proper stencil and colour, complete all as specified and directed.
M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised strip 32X6mm by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 15 mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing, complete all as specified and directed. Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate.
S&F GI Strip 32x6mm fixed on wall or buried in ground or any other indicated situation, complete all as specified and as directed
Supply , install, testing and commissioning of floor mounted LT outdoor panel board AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for indoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of suitable Size with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete all as specified and directed :- BUSBAR :- Copper bus bar 200 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos INCOMER (A) Supply and fixing MCCB 4 pole 415 Volts of breaking capacity of 25 KA of 100 Amps with Fixed thermal and Fixed magnetic setting - 01 No. (B) Supply and fixing On load change over 100Amps 4 pole 415 Volts - 01 No INDICATING DEVICES (A) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (B) Supply and fixing Digital Ampere Meter 31/2 digit display , incl CT having CTR 100/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos OUTGOING FEEDERS (A) Supply and fixing MCCB of 4 pole , 415volts of capacity 80 amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting - 01 No (B) Supply and fixing MCCB of 4 pole , 415volts of capacity 63 amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting - 01 No (C) Supply and fixing MCB SPN, 230 volts of capacity 16 amps of c curve of 10 KA - 01 Nos, (D) Supply and fixing automatic star delta strater for 20 HP - 02 Nos.
S & F in replacement of MPR 300 Electronic Motor Protection Relay with in-built Earth Fault Protection sutaible of 10 Hp to 22 Hp motors, complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
SHANKAR ENTERPRISE (BID ID -3438078)
M/S S K ENTERPRISES (BID ID -3433700)
Shri Harendra Kumar Rai (BID ID -3433857)
Flint India (BID ID -3433619)
M/S N S CONSTRUCTION (BID ID -3433779)
M/S SEWAK SINGH (BID ID -3433170)
Chinmay Traders (BID ID -3433858)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .