REPAIRS TO LEAKAGE SEEPAGES IN SUNKEN FLOOR IN TOILET BATHROOM AND KITCHEN SANITARY FITTINGS BATHROOM DOORS REPLACEMENT OF INTERNAL WATER PIPE LINES PVC OHT TILES IN FLOORS DADO AND OTHER RELATED WORK IN WOS QTRS SMQ MAP AND CIVILIAN QTRS IN DOMESTIC

Amount

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc and removing the unserviceable debris to a distance exc 1.5km and n. exc 5km complete all as specified and as directed.

Taking down cement plaster in wall/ceiling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing the unserviceable debris to a distance exc 1.5 km and n. exc 5 km complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of 1:3:6 type C1 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

M&L for brickwork with sub class 'B' old size bricks, straight or curved on plan, exceeding 6M mean radius built in cement mortar 1:6 in parapets, and similar works complete all as specified and as directed.

M&L for half brickwork with sub class 'B' old size bricks, straight or curved on plan, to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with water proofing compound complete all as specified and directed Note: WPC will be measured and paid seperately

M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceiling finished even and smooth (without using extra cement) complete all as specified and directed

M & L for two coats of oil Emulsion distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of ceiling and applying three coats white wash complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for and removing the unserviceable debris to a distance exc 1.5km and n. exc 5km complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) average 30 mm thick mixed with water proofing compound finished even and smooth without using extra cement in sunken floor portion etc complete all as specified and directed. Note: WPC will be measured and paid seperately

M&L for rendering 15mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound finished even and smooth in sunken portion without using extra cement complete as specified and as directed. Note: WPC will be measured and paid seperately

M&L for priming the surfaces and applying normal treatment & laying 3mm thick APP membrane and laid by torching and applying evenly a tack coat of bitumen 85/25 @ 1.20kg / sqm for sunken treatment including providing a GI pipe of 40 mm dia light grade spout projecting at least 200mm from external wall etc complete all as directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded aggregate in floors/sub base of 75 mm average thick finished fair and even complete all as specified and directed.

Supply only Liquid water proofing compound.

Taking up or down pipe PVC/steel tubing and connections upto 25 mm bore, for refixing or removal etc complete all as specified and directed.

S&F of 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing 15 mm old steel tubing and connections in new or old position Complete to Walls, ceiling and floors etc complete all as specified and as directed. Note: Serviceable GI tubing obtained from taking down item No. 19 shall be reused

S&F of 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing 20 mm old steel tubing and connections in new or old position Complete to Walls, ceiling and floors etc complete all as specified and as directed. Note: Serviceable GI tubing obtained from taking down item No. 19 shall be reused

S&F of 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing 25 mm old steel tubing and connections in new or old position Complete to Walls, ceiling and floors etc complete all as specified and as directed. Note: Serviceable GI tubing obtained from taking down item No. 19 shall be reused

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish and removing the unserviceable debris to a distance exc 1.5km and n. exc 5km complete all as specified and directed

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed in CM (1:6) 15 mm thick complete all as specified and as directed.

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed in CM (1:6) 15 mm thick complete all as specified and as directed.

S&F of Glazed ceramic coloured tiles of size, 300x450x7 mm thick, in vertical surfaces of skirting, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including backing coat/ plastering in CM (1:4) 10 mm thick complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .complete all as specified and directed.

M&L for Granite (of any type) work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed

S&F in repairs of Vitreous china squatting pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs Plastic water closet seat cover, black, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete all as specified and directed..

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and directed

S&F of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed

S&F in repairs of Waste coupling of 32 mm bore chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed

S&F in repairs of Waste coupling of 40 mm bore chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed

S&F in repairs of CP Bib taps 15mm bore cast copper alloy fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed

S&F in repairs of fancy type Bib tap standard of PTMT 15mm high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 105 grams). Make: Prayag or Equivalent, complete all as specified and directed

S&F in repairs of Angle cock of 15 mm dia cast copper alloy fancy type chromium plated complete all as specified and directed

S&F in repairs of concealed stop valves 15 mm dia cast copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed

S&F in repairs of stop valves 15 mm dia cast copper alloy fancy type CP screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed

S&F in repairs of Gun metal globe or gate valves/ Non return Valve of 20mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed

S&F in repairs of Gun metal globe or gate valves/Non returning Valve of 25mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed

S&F in repairs of Ball valve 15mm dia high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt. 142gms) etc complete all as specified and directed

S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and directed

S&F in repairs of Ball valve 25mm dia high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt. 455gms) etc complete all as specified and directed

S&F in repairs of ABS chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm in repairs complete all as specified and directed

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 litre capacity, white, with inlet, ball valve, float and handle including brackets and long flush bend etc complete all as specified and directed

S&F in repairs of PVC connection 15mm size with brass CP nuts of length 450 mm complete all as specified and directed

S & F in repairs of Rotational moulded PVC water storage tanks of 500 litres capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 litres complete all as specified and directed

S & F in repairs of Rotational moulded PVC water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 litres complete all as specified and directed

S&F in repairs of Lids (screwed type) for Rotational moulded PVC water storage tank of 250 to 2000 litres capacity fixed in position all as specified in SSR part – I. complete all as specified and directed

S&F in repairs Nipple / flange 20 mm suitable for HDPE water tank (Minimum weight 45 gms) all as specified and directed.

S&F in repairs Nipple / flange 25 mm suitable for HDPE water tank (Minimum weight 65gms) all as specified and directed.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repairs of 15 mm dia fancy type Pilllar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) etc complete all as specified and as directed.

S&F in repairs of Brass CP wall mixer 'hot' & cold water screwed down for iron pipe etc complete all as specified and directed . Make: Jaquar or equivalent make as approved by GE.

S&F in repair of centre hole basin mixture 15 mm bore dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe and fixed complete all as specified and directed Make:- Cat Part No COT-23169B of Jaquar or equivalent make as approved by GE.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long complete all as specified and directed

S&F in repairs of brass chromium plated towel rail 600mm long "D" type fixed with suitable steel screw complete all as specified and directed .

S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and directed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

S&F in repairs of stainless steel grating hinge type 100 mm dia complete all as specified and directed Make : Cat Part FG92/93 of Pearl / Precision or equivalent as approved by GE

S&F in repairs of sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm etc complete all as specified and directed

S&F in repairs of CP Bib taps two way in one 15 mm cast copper alloy fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .(Make ; Jaguar or equivalent as approved by GE

S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed Make : CERA Cat Part No 8030101 or equivalent as approved by GE

M&L for repairs of holder stand of health faucet ABS body, CP to be replaced to existing holder stand of health faucet etc complete all as specified and directed ( Make : CERA or equivalent as approved by GE

S&F in repair Stainless Steel Dish/plate Display Rack of size 750x600x250mm, made with 0.63mm thick stainless steel sheet, fixed to walls with rowel plugs and brass screws at suitable places, etc complete all as specified and as directed. Make: Prayag, Cat No: P-330 or Silver shine, Cat No: SSKPR-311 or any Equivalent make as approved by GE.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed

S&F PVC (SWR) pipes type 'B' 110 mm bore single socketed in any length fixed on walls, floors, ceiling etc complete all as specified and directed

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe complete all as specified and directed

S&F PVC (SWR) pipes Type 'B' 75 mm bore single socketed in any length fixed on walls, floors, ceiling etc complete all as specified and directed

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and directed

S&F in repairs PVC (SWR) branch piece single (Single Y) equal or unequal 110 mm dia with access door complete all as specified and directed

S&F in repairs PVC (SWR) branch piece double (double Y) equal or unequal 110 mm dia with access door complete all as specified and directed

S&F in repairs PVC (SWR) branch piece single (Single Y) equal or unequal 75 mm dia with access door complete all as specified and directed

S&F in repairs PVC (SWR) Vent cowl 75 mm dia complete all as specified and directed

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore of pipe complete all as specified and directed

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia bore of pipe complete all as specified and directed

S&F in repairs of cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe mounted in cement concrete (1:2:4) type B1complete all as specified and directed

Demolition of reinforced cement concrete chimneys, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) and removing the unserviceable debris to a distance exc 1.5km and n. exc 5km complete all as specified and directed.

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen flat form and shelves in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Note: Reinforcement will be measured seperately

M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed

S & F in repairs suitable Spindles with CP knob (full Turn , Half Turn ) for Bib Cock, Pillar Cock, complete all as specified and directed

Taking down Chowkhats or frames with shutters (without taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and directed

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed. complete all as specified and directed

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed

S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long. complete all as specified and directed

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick complete all as specified and directed

M & L for Mild Steel small articles such as brackets hold fast etc Conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed

Deepika Enterprises

SRI RAM CONSTRUCTION