Internal Wiring of GS Building.

Amount

2 Modular/ 3 Modular/4 Modular

6 Modular

8 Modular

12 Modular

6 A , One way Switch

16A One Way Switch with Indication

2 Module ceiling fan regulator-120 W

20 A One Way DP Switch with Indication

USB charging socket- 2 Module

Ceiling Roses

Flexible PVC Conduit

25 mm Casing Capping

6/16A 3-pin Socket

25 A socket

10 A / 16 A SP MCB

25 A SP MCB

63 A FP MCB

63 A DP RCCB-30mA

4 kV, 40 kA Type 2 Surge diverter

SITC of 8 Way ETPNDB as per Specification.

25 mm Dia

32 mm Dia

AC Point Wiring

Primary Power Point Wiring

Secondary power point wiring ( Located in a separate box)

Primary Light/Fan Point Wiring

Secondary Light point wiring

SITC of 1200mm Dia Ceiling fan including down rod and safety wire.

Exhaust Fan ( PVC Body with Louver) 200 mm Sweep

Exhuast Fan Metalic body 450 mm Sweep with louvers

Indoor LED light fixture.( Similar to make RC 380 - Min 3000 Lumen of M/s Phillips or Equivalent model of M/s Wipro)

Surface Mount Round Light ( Similar to SM 200C - Min 1600 Lumen of M/s Philips or Equivalent model of M/s Wipro)

Surface Mount Round Light ( Similar to SM 251C - Min 1200 Lumen of M/s Philips or Equivalent model of M/s Wipro)

Recessed Round Light ( Similar to of M/s Philips- DN 295 B Min 1500 Lumen or Equivalent model of M/s Wipro)

10 W LED Surface mounted mirror light fixture.(Similar to BN021 10S of M/s Phillips or Equivalent model of M/s Wipro)

Supply, Installation, Testing and Commissioning of LT electrical panel as per specification

SITC of 1100V grade 3.5 corex 240 sq.mm Al conductor XLPE insulation as per Specification.

SITC of 1100V grade 4 corex 16 sq.mm PVC insulated strip/Round armoured cable with Copper conductor as per Specification.

3.5 C X 240 Sq. mm Aluminium Conductor

4 C X 16 Sq. mm Copper Conductor

300 mm Width Cable Tray as per Specification

Brick Protection of LT cable as per Specifications

Cable Route Marker as per Specification

Copper Earth pit as per specification and drawing.

Insulating Mats-Supply of fine ribbed electrically tested safety matting of size is 1mtsX1mts as per following specification.

Cross units for (500mm air terminal) with intermediate plate for round and flat cond. up to 40 mm, Cross unit for aboveground and underground connections, For connecting conductors in cross and T arrangement, Material of clamp: St/tZn, Clamping range Rd / Fl: 8-10 / 30-40 mm. Intermediate plate: yes along with Conductor of Diameter Ø- 8 mm for (500mm air terminal) Cross-section- 50 mm2, of Material- Aluminium. The Terminal shall be provided with concrete base of 17 kg and plastic support for concrete base 17 kg. Necessary U-bolt clamps,cross unit, flat strip holder etc. are also included in the scope of this item. Model Similar to M/s DEHN or Equivalent.

Air Terminal Unit of 2000 mm length with intermediate plate for round and flat cond. up to 40 mm, Cross unit for aboveground and underground connections, For connecting conductors in cross and T arrangement, Material of clamp: St/tZn, Clamping range Rd / Fl: 8-10 / 30-40 mm. Intermediate plate: yes along with Conductor of Diameter Ø- 8 mm for (500mm air terminal) Cross-section- 50 mm2, of Material- Aluminium. The Terminal shall be provided with concrete base of 17 kg and plastic support for concrete base 17 kg. Necessary U-bolt clamps,cross unit, flat strip holder etc. are also included in the scope of this item. Model Similar to M/s DEHN or Equivalent.

Supply and installation of 25 X 3 mm GI Strip Conductor for Lightning/earthing conductor.Cross units without intermediate plate for two flat conductors-Cross unit for aboveground and underground connections. Material: Zinc. Necessary U-bolt clamps,cross unit, flat strip holder etc. are also included in the scope of this item. Flat strip holder with cleat, flat design, with slot, St/tZn at every 1mtr interval. Strip holder with cleat - flat design, Twin screw cleat with M6 screws, Height of conductor holder: 10 mm. Conductor holder support Fl: 30 x 3.5 mm. Material of conductor holder: St/tZn Material thickness: 3 mm. GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm shall also be included in this item. Model Similar to M/s DEHN or Equivalent.

Supply, Installation, Testing and Commissioning of Test Links

Supply , Installation , testing and commissioning of Earth electrode with MS Rod ( maintenance free earthing ) for earthing Pit for Lightning arrestor grounding as per specification.

PCC Work

RCC Work including Reinforcement as per Specification.

Excavation and Back filling with disposal of excess earth as directed by Engineer-in-Charge as per Specification.

Providing and Fixing in position Suspended false ceiling system using 600x600mm Aerated Calcium Silicate Ceiling tiles (plain/ cosmos/ spinton model) Tiles having 15mm Densified edges and 100% Humidity resistance, Incombustible as per BS476 part IV with Thermal conductivity of 0.043 w/m K and approved surface Design and with approved edge Profile placed in a suspended Grid of silhoutte reveal grid system of Aerolite or equivalent with 15 mm wide flanges incorporating a 3mm central recess. The main runner and cross tees shall have mitered ends and birdsmouth notches to provide mitered crucifor junction. The main runners and cross tees shall be made of Hot-dipped G.I. steel sections having an exposed surface capping of Pre-finished baked polyester painted coil wherein the main tee of size 15mmx41mmx0.33mm (Min.) shall be suspended at 1200 mm centres securely fixed to the structural soffit by approved hangers at 1200 max. centres and not more than 150 mm from spliced joints. The last hanger at the end of each Runner should not be greater than 600 mm from adjacent wall. last along the length of ceiling with 4mm dia G.I. wire with necessary level adjusters and cross tees of size 15x41x0.33mmx1200mm shall be inserted in to slots between the main Tees at 600mm centres and thereafter in direction vertical to the longer TEEs, cross Tees of size 15x41x0.33mmx600mm shall be inserted to form a grid size of 600x600mm resting on the periphery walls on wall angles of size 22x22x3000x0.40mm thickness. Note: The rate shall include providing necessary openings for light fixtures, diffusers, Trap doors etc. to be made as per layout Drawings. The work shall be carried out as per directions of Engineer-in-charge. The main Tees to be suspended from the ceiling/ Soffit with the help of metal dash fastners of 6mmx50mm, soffit cleats of 25mmx35mmx1.60mm and 4mm dia G.I. wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 Kgs/Sq.m etc. complete all as per drawings and specifications and as directed by Engineer-in-charge. (Only Calcium Silicate False Ceiling area will be Measured for the Purpose of Payment).

Providing and Fixing in position Suspended false ceiling system using 12mm thick Calcium Silicate Boards, 100% Humidity resistance, Incombustible as per BS476 part IV with Thermal conductivity of 0.043 w/m K placed in a suspended Grid of size of 600x 600mm made of Hot-dipped G.I steel sections wherein the Ceiling Sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick Strip hangers made of G.I sheet sections with necessary level adjusters and Inter Channels of 0.90mm thick with connecting Clips and resting on the Periphery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, Trap doors etc to be made as per layout Drawings and as per directions of Engineer-in-charge. The rate quoted shall also include two coats of acrylic emulsion paint over a coat of primer. Note: The rate shall include providing necessary openings for light fixtures, diffusers, Trap doors etc. to be made as per layout Drawings. The work shall be carried out as per directions of Engineer-in-charge. The main Tees to be suspended from the ceiling/ Soffit with the help of metal dash fastners of 6mmx50mm, soffit cleats of 25mmx35mmx1.60mm and 4mm dia G.I. wire with galvanised spring steel levelling clips/ Gl strip hangers. The entire grid system shall be designed to bear a distributed load of minimum 15 Kgs/Sq.m etc. complete all as per drawings and specifications and as directed by Engineer-in-charge. (Only Calcium Silicate False Ceiling area will be Measured for the Purpose of Payment).

Supply, Installation , Testing & Commissioning of of MS Support

Supply, Installation , Testing & Commissioning of type NP2 150 mm Dia Hume Pipe

Photo Luminiscent Signages for Toilet, Exit, Staircase, Lift etc. Board Thickness 3 mm

QUALITY ENGINEERING SERVICES

MEPF INFRA

Shantha Electricals and Engineers Pvt Ltd