Construction of the Pancheshwar Nath Maharaj Gate near the temple in village Pachomi. (M.L.A-Faridpur)

Excavation in foundation in ordinary soil, loame, clay or sand inculuding lift upto 1.5 m & lead upto 30m including filling watering & ramming of excavated earth into the trenches or into the space between the building & the sides of foundation trenches or in to the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30mfrom the foundation trenches. SI. No. 251

Concrete with 4 cm. gauge brick ballast, final local sand of 1.25 FM and cement in proportion of 8 :4 : 1 in foundation and under floor, Including supply of all Material with mixer machine, Labour and T & P etc. required for proper completion the work.As per S.I. No. 275.

R.C.C. work with Cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Lighter beam SI.No. 288.

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks. S.I.No. 504

Two coat painting over one coat primer coat on new wood & steel work with superior synthetic enabel point i/c all material,labour and T&P etc. Complete of work as per chapt. 15 new item No. 1,23/2.

Supply and fixing of 25 mm Dia & 600mm long bolt nut…..... Complete item (As per S.E. Senction)

Supply & erection built up overhead strucutre 10 to 15 span comprising of two vertical post of 6 meter high made tip of 300 mm dia and NB medium class N.B. made class mai pipe 40 mm class pipe heavy N.B Pipe bracing as per approved design drawing with one coat of steel primer and two coats of synthetic enamel paints complete work. Complete item DSR NO.10.16.1

Cost of crain charges….complete item.DSR NO-0028

Cost of loader charges….complete item DSR NO-0018

Retro -Reflective sheeting type -XI with 4 mm thick ACM Single Side. Providing & Fixing of Reflective signs with a corrosion resistent 4mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered wiyh high intensity prismatic sheeting type IV as per IRC-67:2012 Retro reflective sheeting with face back frame MS angle of 35X35X5mm Legends,Letters,numerals and Boards etc should be as per MoRTH specification no.801.3.7,The sheetion shell have pressure sensitive adhesive of the aggresive tack type requring no heat solvent other preparation for adhesion to a smooth clean surface , in a manner recommonded by the sheeting manufacture .The ACM (Aluminium composite Material) shall be fixed on the back frame MS angle with reviting Micro prismatic type IV Retro -Reflective sheeting confirming to ASTM D4956-09 Shall be pressure fixed. The Retro -Reflective sheeting shall be tested for a certificate of haveing the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage , flexibility, liner ,removal ,adhesion ,impact resistance ,specular gloss and fungus resistance 3 year outdoor weathering and its having passed these tests shall be obtained from international/goverment Laboratory institude by the manufacture of the sheeting and in the case the certificate is obtained from international condition it should also be obtained from indian condition with in 3 years of launching of product by the manufacture in abroad ,Alternatively a certificate conforming to ASTM specifaction (D4956-09) on artificial weathering fron a reputed laboratory in India can be aceepted provisionaly In such a sutuation.the employer/client, if so desire could seek for a performance guarantee which would be released after receipt of certificate meeting the requirment of three years outdoor weathring of the seeting as per IRC 67:2012 & proof of the same report shall be uploaded which quoting tender. The rate shall include all materials, labour,T&P, tranportation, installation and incidentals all complete as per direction of the Engineer-in-charge.as per MoRTH - 801

S/F of informatory sign board.........i/c painting,writing & fixing at site.... Complete.