IMPROVEMENT TO SMQs AT ARJUN ENCLAVE AT AF STN AMBALA

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and direcetd.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and direcetd.

Dismantling of brick tiles or concrete tiles single layers on roof and rubbish off the premises to a distance not exceeding 500 mtr including stacking of servicable brick tiles complete all as specified and as directed,

Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Demolition of RCC, of any description and in any position inluding cutting of reinforcement to facilitate demolition and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Cutting/grouting of bushes/plants on building and filling holes with cement mortar including chemical for burn the root inserted in wall/slab and disposal of unserviceable material to a distance n exc. 50 mtr and clearing site complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Dismantling old unserviceable RCC/PVC water tank of capacity exc 250 but n. exc 500 Itrs cpacity including S & F PVC water storage tank of 500 Itrs capacity HDPE double layered, cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm Gl pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

Dismantling of stone slabs/ floor and wall tiles of any description or thickness as in floors, aprons etc laid and bedded in any mortar including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of breaking up drain/ water pipes of AC/RCC/PVC of 100/75mm bore including all fittings etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debris a to distance n.exc 500 mtr complete all as specified and directed.

Demolition of plain cement concrete, un-reinforced of any description and in any position not otherwise specifically provided for including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Taking up or down GI tubing with all connections and fittings of 15mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

Taking up or down GI tubing with all connections and fittings of 20mm bore including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer-in-Charge

Demolition of plain cement concrete, un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Surface dressing not exc 15 cm deep in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified.

Returning, filling including spreading, leveling watering and well ramming in layers,not exceeding 25 cm complete all as specified.

Removing of soil excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified.

S & F 35mm thick factory made 2nd class hardwood glazed and skelton shutters open rebated and prepare to receive glass guage (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fitted to chowkhat, complete all as specified and directed.

S & F factory made BOX type steel windows double shutter (glazed and wire gauzed) with side hunges shutters, includingbox type hinges ,steel handle fabricated type for each leaf duly welded , mild steel barrel tower bolts 150mm size(02 nos for each leaf) duly welded,complete with glazing bars , dovetailed or welded,including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window frame & guard bars complete all as spd and directed .NOTE :-(l) Glazing & wire gauze shall be measured and paid separately as S & F and guard bars shall be measured and paid saparately.(ii)The term double shutter stated is meant for providing glaze shutter as well as wire gauze shutter on outside and inside of the frame respectively.

S & F steel ventilator with top hung shutters, factory made IS 1038- 1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be measured & paid separately.

M & L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads including provision glazing pins/spring clips where necessary in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

M & L for figured glass, pin headed type, 3mm thick and glazing with oil putty or wooden beads including provision glazing pins/spring clips where necessary in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, omplete all as specified and directed.

S & F Factory made solid panel PVC moulded door shutter (with wood free EPS) 28 to 30mm thick (stiles) with 2, 4, 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm plain colour PVC sheet on back face and fixing in frame at site as per drawing shown in SSR, omplete all as specified and directed.

S & F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

S & F butt hinges, medium weight, cold rolled, mild steel 50mm long (ISI marked), complete all as specified.

S & F extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.

S & F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.

S & F aluminium alloy, 16mm dia and 300mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified.

S & F second class hard wood small fittings such as brackets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exc 200oucm each complete all as specified and as directed.

S & F 300m mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed

S & F mild steel work as in chowkats of doors of angle or other section including hold fasts conferming to Fe-410E gde E-250 of angle or other sections with gusset plates, rails, braces etc, complete all as specified and as directed.

S & F mild steel door shutter two leaves made out of 0.80 mm MS sheet, all round with frame of angle or other sections with gusset plates, rails braces etc , and leaves of 21 gauge MS sheet as per godrej pattern , with three way of locking arrangement with and includding brass lock with duplicate keys , steel CP handle 200 mm long , drilled for fixing of steel sheeting or other covering door etc complete conforming to Fe 410-00 (Gde E-250) quality 'A' including one shop coat of red oxide primer over two coats of spray painting door with frame complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

M & L for Cutting holes brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wall built in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. Note:- This item shall not be operated if hold fast holes are required at new location.

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed

M & L for PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregates as in padding on roof to maintain the required slope & finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for hydraulically pressed Cement Concrete tiles plain size 250x250x19 mm laid over and including 15mm thick screed in CM 1:4 with WPC & pointed in CM 1:3 mixed with crude oil ( WPC as per manufacturer’s instruction shall be deemed to be included in unit rate quoted) complete all as specified and as directed.

M & L for rough cast plaster 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depending on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered.

M & L for APP polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg per sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M & L for machine cut Kota Stone slab/tiles 18-20 mm thick, minimum size 30cmx 45cm as in flooring in trade, landing etc laid over and including screed bed 20 mm thick in cement mortar 1:6 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish complete all as specified and as directed.

M & L for machine cut Kota stone slab/tiles 18-20mm thick, on vertical surface as in skirting/dado /steps riser/pillars etc, laid over and including rendering 10 mm thick in cement mortar 1:4 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish complete all as specified and as directed.

M & L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M & L for Brick work straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 (Except bricks) using old bricks after cleaning and washing complete all as specified and as directed.

M & L for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

M & L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length, 12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

Material & Labour for repair to chajjas/ roof projection with plain cement concrete 1:2:4 type B-0 using 12.5 mm graded mechanically crushed stone aggregates and dubbing out with 20 mm average thickness including necessary form work after taking down/ demolition of loose portion/ part/ particles & rendering with 5 mm thick in cement mortar 1:3 and finishing the exposed surfaces even & smooth using extra cement complete all as specified and as directed.

Use and waste of form work to chajjas, fins, facia and similar works for rough finished surfaces of concrete complete all as specified.

M & L for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in fins, fascia louvers, parapet and railing complete all as specified and as directed.

M & L for Mild steel TMT bars ,Fe 500 D, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F in repairs fancy type MS curtain rod 20 mm bore .coloured powder coated of approved shade with and including MS powder coated bracket knobs (two nos for each cut length), funnel on ends (two nos for each cut length) and suitable PVC rings of 1st quality after taking down/out rod as existing at site complete all as specified and as directed.

S & F in repairs vitreous china squatting pan ,Orissa pattern, 580mmx440mm, white, with and including PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe including providing lime concrete bedding and making good to floor complete all as specified and directed.

S & F in repairs PVC low level flushing cistern, white, valveless syphonic action type 10 Its capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and as directed.

S & F in repairs sink made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 495 mmx420mm bowl size 410x330x 160mm complete all as specified and as directed..

S & F in repairs stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheet complete all as specified and as directed.

M & L for coloured, non- skid joint free,edge cut, ceramic tiles, 1st quality, 7 to 8 mm thick ,square/ rectangular, area of each tile exceeding 0.06 but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

M & L for coloured, non- skid joint free,edge cut, ceramic tiles, 1st quality, 7 to 8 mm thick ,square/rectangular, polished, area of each tiles exceeding 0.11 but not exceeding 0.18 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

All as per item No 65 here in before but in verticle surfaces with backing plaster of 10 mm thick other than fair faces on wall in CM 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of size 300x450x7mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick / concrete walls complete all as specified and directed

M & L for 20 mm thick granite(of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the sahde of granite tiles including grinding and polishing complete laid over 20mm thick screed bed in cement mortar 1 ;6 including bull nosing of edges and gas pipe hole up to bottom of slab complete all as specified and as directed .

S & F in repairs vitreous china wash hand basin, oval type, white, of size 630X450mm including 32mm bore PVC waste pipe and CP waste fitting and a pair of mild steel angle iron brackets of suitable Size fixed in counter slab complete all as specified and as directed.

S & F in repairs 15 mm dia pillar tap , fancy type, brass chromium plated with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and fly nut screwed complete all as specified.

S & F in repairs fancy type stop valve/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes of 15mm bore complete all as specified and directed.

S & F in repairs 15mm dia stop valves cast copper alloy chromium plated (Concealed type) fancy type long shank and cup with capstan head and cup screwed both ends for iron pipe or for union including cutting chases for concealing after taking down valve as existing at site complete all as specified and as directed.

S & F in repairs for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwed both end sor iron pipe and fixed

S & F in repairs for 15 mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwed both end sor iron pipe and fixed

S & F in repairs bib taps 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs brass Chromium plated shower rose, fancy type, suitable for 15 mm bore pipe with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.

S & F brass chromium plated tubular towel rail 20mm dia fancy type, 60cm long superior quality, between flanges fixed to wall with brass CP screws after taking down/out as existing at site complete as specified and directed.

S & F soap dish brass, chromium plated, size 160 x 160 x90 mm fixed with and including plugs with brass CP screws after taking down/out as existing at site complete all as specified and as directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long after taking down/out as existing at site complete all as specified and as directed.

S & F in repairs chromium plated grating 100mm dia fixed complete all as specified.

S & F in repairs PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

S & F in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

S & F PVC (SWR) bends with access door any radius, for 110mm bore of pipe complete ail as specified and as directed.

S & F PVC (SWR) branch piece, 110mm bore single Y, equal or unequal complete all as specified and as directed.

S & F PVC (SWR) gully trap 125x110 mm made of type-B pipes setting and jointing with solvent cement complete all as specified and as directed.

S & F in repairs UPVC floor trap 75mm dia plain with PVC grating, type-B pipes including jointing to waste pipe with solvent cement complete all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall with suitable size F1 clamps of size 25mmx3mm, complete all as specified and as directed

M & L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:4 mixed with WPC as per manufaturer instructions of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

M & L for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

M & L for PCC 1:4:8, typeD-2 using 40mm graded mechanically crushed stone aggregates, 100 mm thick as in sub base of floors complete all as specified and directed.

M & L for 25 mm thickness PCC 1:2:4 type B0 using 12.5 mm graded mechanically crushed stone aggregates as in floor finished even and smooth without using extra cement complete all as specified and directed.

S & F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S & F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

M & L for for carrying out water proofing treatment of sunken floor as under:-(i)The concrete/ wall surface shall be cleaned throughly of all laitance, loose particles, dust, grease etc. any friable unsound area shall be chipped, cleaned and there after pre-welted to a saturated surface dried conditions.(ii) In case of potholes , superficial cracks found , the same shall be repaired with polymer modified mortar 1:3(1 cement and 3 coarse sand )using Dr fixit pidicrete URP 301/Sikka latex or equivalent in Asian paints/ Forsoc as admixture @ 10% of cement content and the same shall be applied on vertical area after removing of plaster upto 2 ft height (iii)On the prepared surface , apply a primer coat of Sika latex / Dr. fixit pidicrete URP 301 or equivalent in Asian paints/ Forsocmodified cement slurry 1:4:8 (1 admixture : 4 water: 8 cement), after prewetting the substrate @ 2 kg/sqm .(iv)the surface thus prepared shall dampen upto saturation and apply two coats of sika top seal 107 or equivalent in Dr fixit piddilite/Asian paints/forsoc ,acrylic modified water proofing coating on the entire area @1.5 kg/sqm (each coat) Second coat shall be applied after 6-8 hrs after the first coat and in the direction right angle to the previous coat. the water proofing should be taken to a vertical height of minimum 600 mm above .(v) Apply open woven glass fiber mesh of sika Fab 1 or equivalent in Dr fixit piddilite/Asian paints/forsoc, 150 mm wide strip over the PCC benching (Gola) whilst the first coat is wet and then apply scond coat. cure the hydrosent application ( Minimum 6-8 hrs drying) for a minimum 3 to 5 days .(vi)Apply a protection layer of 10 mm thick plaster made of 1:4 cement sand mortar admixed with integral water proofing compound Sika plastocrete plus/ Dr fixit piddilite LW plus or equivalent in Asian paints/ forsoc @ 200 ml/bag of cement, applied over the water proofing coating. Note; The rate include the cost of demolition of exiting floor, sub base , PCC/ hardcore filled under floor, removal of debris , removal and replacement of damaged CI/PVC pipes, floor,Nahani traps complete all as specified and directed.

M & L preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling repairing with approved white putty complete all as specified directed.

M & L preparation of old plastered surface of ceiling and applying two coats of white wash on ceiling repairing with approved white putty complete all as specified and as directed.

M & L for two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , alkali and fungal resistance, dirt resistance exterior paint of approved shade/tint(Company depot tinted),with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied, on newly plastered surfaces of walls including preparation of surfaces repairing with approved white putty complete all as specified and as directed.

M & L for two coats of 100% premium emulsion acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 , alkali and fungal resistance , dirt resistance exterior paint of approved shade/tint(Company depot tinted),with silicon additives @1.43 Litre/10 Sqm over and including priming coat of exterior primer applied ,on complete removal of existing treatment of old plastered walls including preparation of surfaces repairing with approved white putty complete ail as specified and as directed.

M & L for two coats of Oil bound distemper of approved shade/tint over a coat of primer over apporoved white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

M & L for two coats of Oil bound distemper of approved shade/tint repairing with apporoved white putty of any thickness to achieve smooth finish, on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as directed.

S & F machine crafted box type cabinet for kitchen using 18-19 mm thick PVC board both side laminated with and including all necessary fitting and fixtures to install wire basket, shutter shall be fixed by using full overlay MS clips on hinges high quality nickle plated satin finish size-101 mm -150 mm, 02 Nos per leaf including all fittings channels, 150 mm s/s handles complete all specified and directed . NOTE:- (i) Wire basket shall be measured separately. (ii) Front area of box shall be considered for payment purpose. (iii) Depth of box shall be equal to the width of cooking platform.

S & F Stainless steel chromium plated peg set having 6 pegs for hanging of clothes of approved pattern shape and size complete all as specified and directed.

M & L For PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in sub base of floors in any position and in any bthickness, complete all as specified and directed .

S & F Gl spout 40 mm dia medium grade to be embeded in sunken floor complete all as specified and directed.

M & L For PCC 1:3:6type C-2 using 40 mm graded crushed stone aggregate Cement concrete in foundations, filling and mass-concrete complete all as specified and directed .

M & L Pre cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 for drain covers in manholes cover etc.(Reinforcement shall be measured separately)

M & L for cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in surface channels and drains complete all as specified and directed.

M & L TMT bar 6 to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooking for columns, hooking ends and binding with MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M & L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) as in coping, for water trough and the like including weathering , slightly rounded or chamfered angle and throating etc including necessary form work etc complete all as specified and directed

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.as in man holes channel complete all as specified and directed

S & F wire basket made of top quality 304 grade stainless steel, nickls chromium plated ( Ni 4%) of Approved design and pattern complete ail as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of hard standing complete all as specified and directed..

Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L rubber moulded designer coloured precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M & L for providing cement concrete in roof, kerbs , interlocking tiles or rounded or chamfered on edged type B-1 1:2:4 ( 20 mm graded aggregate) complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

Taking down carefully call bell kept in safe custody during execution of work and refixing the same and connecting with PVC flexible wire 3 core with copper conductor 0.5 sqmm complete all as specified and directed.

Taking down carefully LED tubelight fitting kept in safe custody during execution of work and refixing the same and connecting with PVC flexible wire 3 core with copper conductor 0.5 sqmm complete all as specified and directed.

Taking down carefullyTPN DB with TPN 63 Amp kept in safe custody during execution of work and refixing the same in wall including makinq qood disturbed surfaces complete all as specified and directed.

Taking down carefully SPN DB with kept in safe custody during execution of work and refixing the same in wall including making good disturbed surfaces complete all as specified

Taking down MCB SPN of any rating from SPN DB kept in safe custody during execution of work and refixing the same in wall including makinq good disturbed surfaces complete all as specified and directed.

Taking down MCB SP of any rating from SPN DB kept in safe custody during execution of work and refixing the same in wall including making good disturbed surfaces complete all as specified and directed.

Taking down carefully existing electric meter from the existing place, kept in safe custody and refixing the same after complete the work with suitable size of copper wire for necessary action from meter to DB and meter mounted on suitable size of wooden box complete all as specified and directed. Note:- (i) The reading of meter will be taken in presence of users rep and BSO and kept in record. (ii) Cost of wiring deemed to be included in quoted rates.

Taking down carefully water Storage heater of capacity 25 Ltr including PVC connectin from the existing place , kept in safe custody and refixing the same in serviceable condition after completion of the work complete all as specified and directed.

Taking down of ceiling fan for wiring work and refixing the same with PVC flexible wire 3 core with copper conductor 0.5 sqmm ind painting complete upto connector/ceiling rose complete all as specified and directed.

M & L for concealed point wiring complete with 1.5 Sqmm single core multistranded, copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia 'ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,swftches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm FRLS PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly complete all as specified and directed.

(a) One lightfan/exhaust point controlled by one switch 6 amp one way complete all as specified and directed.

(b) One 3 pin switch socket combination 6 amp on the independent board complete all as specified and directed.

(c) One 3 pin switch socket combination on same board With other switches complete all as specified and directed.

( d) one bell point controlled by one bell push complete all as specified and directed.

(e) one light point controlled by two way switch complete all as specified and directed.

(f) All as described aoove but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete all as specified and directed.

M & L switch piano flush type single pole, one way 6amp complete all as specified and directed.

M & L switch piano flush type single pole , two way 5/6 Amps complete all as specified and directed.

M & L switch piano flush type single pole, one way 15/16 amp complete all as specified and directed.

M & L socket outlet 2 in 1 ,3 pin 5/6 A flush type complete all as specified and directed.

M & L socket outlet 2 in 1 , 3 pin 5 A and 15 A flush type complete all as specified and directed.

S & F ceiling rose 65x50mm three terminals. 230 volt complete all as specified and directed.

S& F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting complete all as specified and directed.

S & F LED Lamp 9 watt B22 type complete all as specified and directed.

S & F bell push flush type 230 Volt complete all as specified and directed.

S & F bell Ding Dong AC, 230 volts single pole, complete all as specified and directed.

S & F socket type fan regulator electronic type complete all as specified and directed.

S & F in replacement LED tube light fitting 1x18 watt, 230 volts in commercial channel with powder coated CRCA sheet housing with opal diffuser for LED with LED tubelight with high efficient LED in aluminium housing with clear & milky diffuser connecting with twin core twisted flexible copper conductor cable with suitable size rod complete all accessories all as specified and directed. Note : The LED fitting should Have PF 0.9 , CRI > 70, L 70, lumen-minimum 100 lumen/watt L 70

S & F in replacement indoor decorative LED surface mounted light fitting with LED tube 10 watt and driver, IP 20 complete all as specified and directed. Note:- LED fitting having PF>0.90, Lumen-minimum 100 lumem/watt.

S & F in replacement LED bulk head 10 watt with pressure die cast aluminium housing high efficient LEDs including 10 watt LED bulb and enclosed with milkv diffuser IP 66 protection complete all as specified and directed.

S & F LED street light fittings 20 watts, input 110 volts to 240 volts volts , the driver must be constant current type having THD <10% including 25/32 mm GI bracket of light grade Gl pipe of length 1.2 Mtr shape in bend with necessary fixing arrangement complete all as specified and directed .

M & L submain wiring (in replacement) with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 06 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 6 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all as specified and directed. Note : Two runs of 6 sqmm cable alongwith one run of 6 Sqmm PVC insulated unsheathed copper conductor as earth wire and one run PVC conduit 25 mm dia with accessories will be measured as one length.

S & F in replacement sheet metal enclosures for MCB distribution board TPN 4 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed.

Supply and fix MCB 'B' series TPN 63 Amp 415 Volt 16 KA fixed in TPN DB complete all as specified and directed.

S & F SPN plug and socket DBs (in replacement) with and including oneSingle pole MCB rated 20 Amps capacity with socket plug top 2 pin and earth plug complete all as specified including making niche in wall, mounted flush and making good adjoining surfaces to match with existing complete all as specified and directed.

S & F in replacement sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 8 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed.

Supply and fix 'B' series MCB SPN 40 amps, 240 volts, 50Hz complete all as specified and directed.

Supply and fix 'B' series MCB SP 6-32 amps, 240 volts, 50Hz complete all as specified and directed.

M & L earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of Gl and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6) type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs.GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc including dismentaling/taking down unserviceable earthing complete all as specified and directed.

Supply & fix fans ceiling complete with blades, down rods, electroninc regulator and accessories 230 V 1200 mm sweep min air delivery 210 CFM with service value 6.00 five star rated (BLDC) complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep (Steel body) with Blades, frame And louvers including making of hole of suitable size along all fixing accessories complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 200 mm sweep Made of sturdy engineering plastic with louver.shutter complete induing making of hole/niche of suitable size along with all fixing accessories complete all as specified and directed.

M & L for providing river washed fine sand as in sand cushion with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches (after punning down of sand total punned depth of sand shall be 180 mm) to under ground cable including punning down of sand in layers complete all as specified and directed.

M & L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class 'B' laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

M & L for making bore below the road for crossing the Gl pipe light grade .40 mm dia for cable protection and fill the putty on bcth sides of the Gl pipe after crossing the armoured cable to avoid the water inside complete complete all as specified and directed. Note: Gl pipe 40 mm will be measured & paid in the Subsequent item of schedule.

M & L for galvanized steel tubing 40 mm light garde (ISI marked) for protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supply, laying, jointing and testing LT cable XLPE insulated, armoured and PVC bedded 1100 volts grade,heavy duty with aluminium conductor 10 Sqmm 4 core laid in ducts/through pipes, in floor, on poles, in trenches including taking down unserviceable LT cable complete all as specified and directed.

SATISH AND CO

M/S SHANTI CONSTRUCTION