REPAIR AND POLISHING OF WOODEN FURNITURE OF VARIOUS STN UNDER GE 969 EWS.

Amount

CHAIR WOODEN BOTTOM : FD-225/FD-285/FD-56(M) S & F wooden parts of various type of wooden chairs made out of 1st class hard wood teak/Seasam and fixing the same with the existing furniture articles with suitable bamboo pins/glues including removing old U/S wooden parts Complete all as specified in drgs and directed by Engr-In-Charge, as given below:- (a) Rear Legs

(b) Front legs

(c) Front/Side (both side)/rear rails

(d) Stiffeners back side

(e) Leg stiffeners (long side)

(f) Leg stiffeners (Short side)

(g) Seat ply 6mm commercial exterior grade cut in shape of size with perforated as directed.

ALL AS PER ITEM NO-01 ABOVE BUT FOR CHAIR DINING :- FD-16/FD-228/FD-279 (a) Rear Legs.

(b) Front legs.

(c) Rear/Front/Side rails incl cane hole.

(d) Leg Stiffeners Long side.

(e) Leg stiffeners short side.

(f) Back rests.

ALL AS PER ITEMS NO-01 ABOVE BUT FOR CHAIR WRITING :- FD-280,FD-250/FD-20 (a)Rear Legs.

(b) Front legs.

(c) Rear/Front/Side rails incl cane hole.

(d) Leg Stiffeners (long side).

(e) Leg stiffeners (short side).

(f) Back rests.

(g) Arms rests.

ALL AS PER ITEM NO-01 ABOVE BUT FOR CHAIR EASY :- FD-229, FD-201, FD-17 (a) Rear Legs/front legs

(b) Rear/Front rails incl cane hole of legs

(c) Side rails for seat incl cane hole

(d) Front/rear stiffeners

(e) Side rails for back rest incl cane holes

(f) Upper/lower rails for back rest incl cane holes

(g) Arms rest

ALL AS PER ITEM NO- 01 ABOVE BUT FOR STOOL DRESSING CB :- FD-282 (a) Front/Rear Legs

(b) Front Rear rails incl cane holes

(c) Side/Both side rails incl cane holes

(d) Leg Stiffeners (Long side)

(e) Leg stiffeners (short side)

M&L for removing U/S plastic cane from various type of chairs and stool dressing CB and recanning with 2mm thick SHAH/PRIMIUM Godrej pattern plastic cane half round incl provn of 4mm plastic cane half round for beading. Complete all as specified in drgs and directed by Engr-In-Charge FD-16/FD-17/FD-20/FD-229/FD-226/FD-279/FD-280.

M&L for removing U/S parts from the following wooden table and S&F new parts made out of Ist class teak/Seesam wood and fixing with the existing tables with bamboo pins as specified in drgs and directed by Engr-In-Charge, FD-273/FD-239/FD-90(M)/FD-1115/FD-283/FD-284/ FD-275/FD-249/FD-274/FD-235/FD-228/FD-91(M)/FD-277/FD-384/FD-232/FD-278/FD-292 ,for the following tables :- (a) Legs for table dining 6/8 pers.

(b) Front/rear rails of table dining 6/8 pers

(c) Side rails of table dining 6/8 pers

(d) Centre rails of table dining 6/8 pers

(e) Leg of table 3'x2' w/o/with drawer

(f) Front/rear rails of table 3'x2' w/o/with drawer

(g) Side rails of table table 3'x2' w/o/with drawer

(h) Drawer of table 3'x2'

(i) Front/rear top rails of table writing

(j) Legs of table writing

(k) Stiffener of table writing

(l) Side rail of table writing

(m) Leg of table Centre

(n) Front/rear rails of table centre

(o) Side rails of table centre

(p) Leg of table 3'x3'

(q) Front/rear/side rails of table 3'x3'

(r) Leg of peg table

(s) Bottom rail of peg table

(t) Top rail of peg table

(u) Leg of teapoy

(v) Side rail of teapoy

(w) Top rails of teapoy

M&L for removing UNSV top from the following tables and S&F new table tops made out of 18/19mm pre-laminated Particle Board exterior grade, one side teak finish and other side bleached and fixing the same with the existing table with suitable screws incl provn of T/W beading 20x4mm all round to the tops as specified in drgs and directed by Engineer-In-Charge. Make : KIT PLY/ NOVAPAN/CENTURY/GREEN BOARD, FD-376/FD-1115/FD-283/FD-284/FD-275/FD-249/ FD-274/FD-235/FD-239/FD-292/FD-277/FD-384, for the following tables :- (a) Top for table dining 8 pers

( b) Top for table dining 6 pers

(c) Top for table 3'x2'

(d) Top for table writing/Table writing Med

(d) Top for table centre

(e) Top for Teapoy

(f) Top for table 3'x3'

(g) Top for peg table

M&L for removing UNSV wooden parts/members from table bed side and S&F new wooden parts/members made out from 18/19mm thick pre laminated Particle board exterior grade T/F to the existing table Bed side as per specification given in drgs, Make : KIT PLY/CENTURY/GREEN Ply, FD-276, for the following :- (a) Top of table Bed Side.

(b) Side (Both side) of table Bed side

(c) Shelves of table bed side

(d) Bottom of table bed side

M&L for removing UNSV wooden parts from the Bed Hard and S&F new wooden parts made out from Ist class hard wood (Seasom/Teak wood) as per size and dimensions given in drgs to the existing hard bed,complete all as specified in drgs and directed by Engineer-In-Charge, FD-246/FD-247/FD-21,for the following :- (a) Long rails of Bed Hard

(b) Short rails of Bed Hard

(c) Stiffeners of Bed Hard

M&L for removing old UNSV head rest from the Bed hard and S&F new head rest to the existing Bed Hard as per specification shown in the drgs and as directed by Engineer-in-Charge, FD-246/FD-247/FD-21

M&L for removing old UNSV foot rest from the Bed hard and S&F new foot rest to the existing Bed Hard as per specification shown in the drgs and as directed by Engineer-In-Charge, FD-246/FD-247/FD-21.

M&L for removing old UNSV ply wood from Bed Hard and S&F new ply wood 12mm thick commercial exteror grade Make:- Century/ /BHUTAN BOARD/Green Ply/Kit Ply to the existing hard Bed as per specification given in drgs and directed by Engineer-In-Charge, FD-246/FD-247/FD-21.

M&L for removing UNSV wooden parts from the sleeping plateform and S&F new wooden parts made out from (Seasoned Fur/Deodar Wood) to as per size and dimensions given in drgs to the existing Sleeping Plateform complete all as specified in drgs and directed by Engineer-In-Charge, FD-CWEK128/69, for the following:- (a ) Long rails of Sleeping Plateform.

(b ) Short rails of Sleeping Plateform.

(c ) Stiffeners of Sleeping Plateform.

(d ) Legs of Sleeping Plateform.

(e) Planks of suitable size for top(Complete Top) of Sleeping Plateform.

M&L for removing UNSV wooden parts from the Charpoy double Bunk wooden and S&F new wooden parts made out from (Seasoned Fur/Deodar Wood) to as per size and dimensions given in drgs to the existing Charpoy complete all as specified in drgs and directed by Engineer-In-Charge, FD-CWEK-8866,for the following:- (a )Long rails of Charpoy double bunk wooden

(b) Short rails of Charpoy double bunk wooden

(c) Stiffeners of Charpoy double bunk wooden

(d) Legs of Charpoy double bunk wooden

(e) Planks of suitable size for top(Complete top) of Charpoy double bunk wooden as per existing size.

M&L for removing old UNSV looking mirror with frame from the table dressing Gents and supply and fixing new mirror 5mm thick with frame to the existing table dressing gents with mirror as per specification given in drgs and as directed by Engineer-In-Charge. Make : Saint Govin/Modi Guard/Gold fish, FD-230/FD-379/FD-31.

All as per item No-85 above but for table dressing ladies with mirror, FD-251.

M&L for removing old UNSV back base ply from table dressing Gents with mirror and S&F new back base ply 6mm commercial. Make :- Centurey/Green Ply/Kit ply, FD-230/FD-379/FD-31

All as per item No- 87 above but for table dressing ladies, FD-251

M&L for removing UNSV knobs from table dressing gents and table dressing ladies and S&F new CP Brass knobs to the existing frame of table dressing Gents/Ladies, FD-230/FD-379/FD-31/FD-251.

M&L for removing UNSV foam cushion from sofa set of five seater, and S&F new cushion 100mm thick 40 density incl provn of markeen cloth and tepestry cloth of good quality and as per sample approve by GE including provn of Zip on one side rest all as per specification given in drgs, Make :SLEEPWEEL/ KURLON/DUROFLEX FD-258/FD-281/FD-1113.

All as per item No-90 above but sofa set of four seater (Seat only), FD-258.

Taking down UNSV back cushion from sofa set of 4 seater and S&F new one made on TW frame and back side of frame shall be 12mm commercial ply & front side 4mm commercial ply over a foam cushion of 50mm thick of 40 density covered with long cloth and best quality tapestry cloth and as approved by GE. Rest all as specified and shown on drgs. Make : SLEEPWELL /KURLON/ DUROFLEX.

M&L for removing UNSV tapestry cloth from the existing sofa sets of set five and S&F new cushion cover made out of good quality teapestry cloth and as per sample approved by GE incl provn of Zip at one side cover rest all as specified in drgs, FD-258/FD-281/1113.

M&L for removing UNSV wooden parts from the Locker Bed side (W) and S&F new wooden parts made out from hard wood ( Teak wood/Seasom wood) to as per size and dimensions given in drgs to the existing Locker Bed side (W) all as specified and directed by Engineer-In-Charge, FD-154,FD-222 FD-726. (a) Top for locker Bed side (W)

(b) Shutter for locker Bed side

(c) Side (Both side) for locker Bed side

(d) Back of locker bed side

(e) Shelves of locker Bed Side

(f) Hasp & Stapple 75mm

(g) Alluminium Handle 100mm long

(h) Conduit pipe with brackets

(j) Bottom base of locker Bed side

M&L for removing U/S parts from the Table office clerk wooden and S&F new parts made out of teak wood and fixing with the existing tables with bamboo pins as specified in drgs and directed by Engr-In-Charge, FD-31(M), WDF-65, WDF-31 (a) Leg of Table Office Clerk Wooden

(b) Front/rear rails complete of table office clerk wooden

(c) Side rails complete of table office clerk wooden

(d) Drawer of table office clerk of deodar

(e) Leg stiffeners of table office clerk wdn

(f) Top for table office clk wdn

All as per item No 103 above but for Table Office Officer Wdn, FD-32(M), WDF-32 (a) Drawer of table office Officer of deodar

(b) Top for table office Officer wdn

Taking down the following UNSV wooden parts from sofa sets for five/four/three seater and S&F new wooden parts made out of hard wood teak/Seasom wood all as shown on drgs and directed by Engineer - In- Charge, FD-258, FD-281, FD-1113, (a)Leg of Sofa Chair 70 x 35 x 530mm.

(b) Arms rest of sofa chair 70x35x 725mm

(c) Wooden batten 40x40x670 mm

(d) Wooden batten 50x20x670mm

(e) Wooden rails 35x100x670mm

(f) Wooden frame for head 70x35x 600mm

(g) Wooden rail to support back frame 30x50x670mm

(h) Wooden bearer 40x40x1730mm

(j) Wooden rail 35x100x1730mm

(k) Wooden frame for back 70x35x1660 mm

(l) Wooden rail to support back frame 70x35x1730 mm

M&L for removing UNSV part from Trustle store room wooden and S&F new parts made out from Seasoned Fur/Deodar Wood as specified in drgs and directed by Engr-In-Charge, FD-86(M) (a) Leg for Trustle Stores Room (W)

(b) Long Rails for Trustle stores room Wooden

(c) Middle rails for Trustle stores room wooden

(d) Short rails for Trustle stores room wooden

M&L for removing UNSV wooden members/ parts from Bath Mate and S&F new wooden parts made out of teak/seasom wood to the existing bath mate with suitable brass screw as per speceification in drgs, FD-254 (a) Top Rails

(b) Bottom rails

M&L for removing UNSV wooden parts from Rack for Records 6'x2'x6' and S&F new wooden parts made out of 1st class teak wood/seasom to the existing Rack for Records as per specification given in drgs, WDF-42, FD-32 (a) Leg of Size 2 1/2" x 2 1/2" x 6'

(b) Side rails of size 2 1/2"x1"x2'

(c) Shelf of size 6'x2'x1"

(d) Back support rails 8'x3"x1"

M&L for polishing of the Chair wooden bottom W/O Arms with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smoothening the surface with emery paper as specified. Note: Polish shall be done on all exposed surface.

All as per items No - 132 above but for chair dining,FD-16/FD-228/FD-279

All as per items No -132 above but for chair Writing,FD-280,FD-250/FD-20

All as per items No- 132 above but for chair Easy,FD-229, FD-201, FD-17

All as per items No-132 above but for stool dressing CB,FD-282

M&L for polishing of the following tables with high clean glossy finish french polish approved quality including preparation of the surface by putty work and smothering the surface with emery paper as specified in drgs Note: Polish shall be done on all exposed surface. FD-376/FD-1115/FD-283/FD-284/FD-275/FD-249/ FD-274/FD-235/FD-239/FD-292/FD-277/FD-384, for the following tables :- (a) Table Dining 8 persons

(b) Table dining 6 persons

(c) Table 3'x2' with drawer/W/O drawer

(d) Table writing/Table writing Med

(e) Table centre

(f) Table 3'x3'

(g) Peg table

(h) Teapoy

All as per items No-137 above but for table bed side,FD-276

All as per items No- 137 above but for Bed Hard, FD-246/FD-247/FD-21

All as per items No-137 above but for Table dressing Gents, FD-230/FD-379/FD-31

All as per items No-137 above but for Table dressing ladies, FD-251

All as per items No- 137 above but for Sofa sets 4 seater, FD-258

All as per items No -137 above but for Sofa sets 5 seater, FD-258/FD-281/FD-1113

All as per item No 137 above but locker Bed side.

All as per items No 137 above but for table office clerk wooden

All as per items No 137 above but for table office Officer wooden

M&L for painting of Trustle store room wooden with creosote paint for high clean glossy finish approved quality incl preparation of the surface by putty work smoothering the surface with emery paper Complete all as specified in drgs and directed by Engr-In-Charge

M&L for removing old paints from Bath Mat wooden and preparation of surface for painting by putty work to smootherning the surface and spray painting to complete Bath Mat with two coats of synthetic enamel paints white inside and out side Complete all as specified in drgs and directed by Engr-In-Charge

M&L for painting of rack for records with two coats of synthetic enamel paint OG for high clean glossy finish approved quality incl preparation of the surface by putty work smoothening the surface with emery paper Complete all as specified in drgs and directed by Engr-In-Charge

ALI MOHD NAJAR

HAYAT TRADING CORPORATION