SPECIAL REPAIR TO EXISTING OFFICE TOILETS AT ADM SITE AND LKT SITE AT AF STN BHOWALI

Amount

Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supplying and laying of 20 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L for cutting chases, pining in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed conduit wiring, etc and making good, cuting n exc 10cm girth in brick walls complete all as specified and directed.

Supplying and laying of 25 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

S&F Glazed ceramic tiles coloured in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F in rapir Vitreous China, wash basin white, flat back , size 550mmx400 including fasterners of any size, including cutting for and pinning in ends of fasterners or erecting stand including fixing and supply of waste pipe of 32 mm dia x 800 mm, waste coupling of 32 mm dia chromium plated brass complete all as specified and directed.

S&F in repair full pedestal for WHB complete all as specified and directed.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including connection to drain or out going pipe and to flushing pipe including Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Bib taps 15mm dia cast copper alloy chromium plated fancy type, screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

S&F in repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern complete all as specified and directed.

S & F in repair vitreous china Urinal in white colour, half stall type with complete accessories Set, CP Waste coupling, PVC waste pipe, urinal sprader etc. complete all as specified and directed.

S&F in repairs 15 mm bore single lever brass basin mixer, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in rapair Tubular towel rail,Chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected.

Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

S&F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and directed.

Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

Supply and fixing Anodised aluminium powder coated of Approved colour,door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

Supply and fixing Anodised aluminium powder coated of Approved colour, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

Supply and fixing 5 mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified and directed.

Supply and fixing 4 mm thick Figured glass, pin head type and glazing for window/ventilators in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F aluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of 700mm in width and of weightnot more than 35kg and fixed complete all as specified and directed.

S&F Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 100 mm including complete accessories complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked) complete all as specified and directed.

Taking down down cement plaster on brick or stone wall etc incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed.

M&L for complete removal of existing treatment from surfaces of RCC/stone/concrete/brick walls of any description including preparation of scraped surface by removing all depression and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement, complete all as specified and directed.

Complete removal of existing treatment on surface of wall and applying two coats of oil bound distamper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash incl complete removal of old plastered surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B1 using (20 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use & waste of formwork to sides and soffits of lintels, cantilevers, shelves including supports for rough finished flat surfaces of concrete complete all as directed and specified

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed and specified

M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement complete all as directed and specified

S&F for 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor, PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing coping including earth wire complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with,including steel box of required module for fixing of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note:- Modular switch / sockets etc shall be measured & paid separately).

All as per description under serial No. 64 above but for one light point/fan point controlled by one switch, one way switch complete all as specified and as directed.

All as per description under serial No. 64 abov but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per description under serial No. 64 abov but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

Supply and fixing Modular Switch one way 6 Amps 1 module, 240 volts AC flush type, single pole, ISI marked conforming to IS-3854 style single colour series, complete all as specified & directed.

Supply and fixing Modular Socket, 6A - 2/3 pin combined 2 module, 240 volts AC flush type, single colour series, complete all as specified & directed.

Supply and fixing modular white cover plate with frame, 3 module complete all as specified.

Supply and fixing modular white cover plate with frame, 4 module complete all as specified.

Supply and fixing modular white cover plate with frame, 6 module complete all as specified.

Supply and fixing light duty Exhaust fan made of sturdy engineering plastic complete with louvers shutter, 300mm sweep, voltage 230 V, 50 Hz AC supply, copper winding and fixing accessories and including taking down old unserviceable exhaust fan from site and deposite to E/M Yard, complete all as specified and directed.

Supply and fixing PVC lamp holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 230 Volts complete all as specified and as directed.

M&L for sub main wiring alongwith earthwire for two single core 4.00 sqmm size sub main wiring with one single core 4.00 sqmm size earthwire drawn into and including one run 25 mm or higher dia PVC conduit fixed concealed. PVC insulated PVC unsheathed multi-stranded copper conductor cable FRLS in and including PVC conduit medium grade ISI marked, fixed concealed of size as mentioned below complete with all conduit all accessories / fittings as required at site and connecting of earthwire to common earth dolly complete all as specified and directed. Note :- Three run of 4.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Supply and fixing sheet metal enclosure double door 4 way, single pole and neutral, 240/415 volts, AC 50 Hz supply, with 200 Amps rated copper bus bar and IP-42 protection with the in built bus bar link, each bus bar and DIN Rail (separate space incomer isolator/MCCB) and flush to wall including all cutting on wall and making good to match the existing disturbed surfaces complete all as specified and directed.

MCB Single pole Neutral ‘C’ Curve, 415 volts, 10KA, 40 to 63 Amps complete all as specified and directed .

MCB single pole 5 to 32 Amps, 'C' curve 240 volts, complete all as specified and directed .

Supply and fixing single pole and neutral enclosure with one two pin and earth plug and socket with metal top 230 volts with one single pole MCB 20 Amps complete all as specified & directed.

S&F modular type Blankig plate for filling gap for switch/socket complete all as specified and directed.

Supply and fixing LED light fitting 1x20 watt 220 V, AC decorative box type, polycarbonate housing and integrated electronic driver, holder with all accessories including LED light fitting connecting with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F NU LED bulb plus 9 watt 865 B22 3 star , 6500 K, 220 V AC, suitable for lamp holder complete all as specified and as directed Make : Havells / Bajaj /Wipro

Dismantling and taking down carefully the existing unserviceable geysers 25 Ltrs storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldg) and transporting the same to MES E/M office Store yard for carrying out repair work such as De-scaling / over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete all as specified & directed. Note :- (i) Replacement of parts shall be measured and paid separately as supply only (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts, nuts, washers of suitable size.

Supply only heating element 1500 watt for Geysers complete all as specified & directed.

Supply only Inner tank made out of stainless steel suitable for 25 Ltrs capacity Geysers complete all as specified & directed.

Supply only Thermostat of Geysers suitable for 25 Ltrs capacity complete all as specified & directed.

Supply only Outer body made out of 20 SWG mild steel sheet suitable for 25 Ltrs capacity Geysers complete all as specified & directed.

Supply only inlet & outlet assembly made out of brass /copper (ISI marked) suitable for 25 Ltrs capacity Geysers complete all as specified & directed.

Supply only PVC (heavy duty) flexible pipe 15 mm bore and 650 mm long with two nos brass coupling (each connection have two pipe suitable for 'hot' & 'cold' water) complete all as specified & directed.

Supply only pressure release valve /safety valve as per existing size (ISI marked) suitable for Geysers complete all as specified & directed.

Supply & fixing in replacement top and bottom cover of Geysers 25 Ltrs capacity to match the existing, complete all as specified & directed.

Supply & fixing in replacement 3 pin 15 Amps plug top (ISI marked) complete all as specified & directed.

om enterprises

M/S S R Construction

Ramsons

NOORI ENTERPRISSES