Constg. of Anganwadi At Various Villages Under SBVSY (ICDS) - 2025-26 Package No. - SK/SBVSY(ICDS)/05, Ta. - Prantij Dist. - Sabarkantha

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

1 Excavation for foundation upto 1.5 m depth 176.10 157.08 Cum

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard

2 Filling available excavated earth (excluding 176.10 136.92 Cum

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by

ramming and watering.

3 Filling in plinth with sand under floors 21.30 481.81 Cum

including watering ramming, consolidating

and dressing complete

4 Filling in foundation and plinth with murrum or 29.10 294.39 Cum

including watering, ramming and

consolidating etc. complete.

5 Providing and laying ordinary cement 21.30 4376.33 Cum

concrete M.150 for curing complete including

cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns

and Mass concrete

6 Providing and laying ordinary cement 23.70 4717.92 Cum

concrete M.250 and curing complete including

cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns

and Mass concrete.

7 Providing and laying ordinary cement 3.60 9023.33 Cum

concrete M250 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, pillars posts and struts Column Up

to Plinth Level

8 Providing and laying cement concrete 1:4:8 (1- 4.50 3406.94 Cum

Cement : 4- coarse sand : 8- Machine

Crushed stone aggregates 40 mm nominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

9 Providing and laying ordinary cement 15.90 6429.66 Cum

concrete M.250 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work for

Ground and Plinth Beams

10 Brick work using common burnt clay building 21.00 4214.33 Cum

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(Conventional)

11 Providing and laying ordinary cement 10.20 8875.39 Cum

concrete M.200 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, Pillars posts and struts, For All

12 Providing and laying ordinary cement 11.70 6470.27 Cum

concrete M.200 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

Beams For All Floors.

13 Providing and laying ordinary cement 19.50 7343.20 Cum

concrete M.200 and curing complete

including the cost of form work but excluding

the cost of reinforcement for reinforced

concrete work in Slab for All Floors.

14 Providing and laying ordinary cement 3.30 6332.25 Cum

concrete M.200 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

Lintels For All Floors.

15 Providing and laying ordinary cement 2.10 6949.03 Cum

concrete M.200 and curing complete including

the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

Chajja For All Floors.

16 Providing TMT Bar FE 500D reinforcement for 9915.00 77.29 Kg.

R.C.C. work including bending, binding and

placing in position complete for All Floor

17 Providing throating or plaster drip and 39.60 43.08 Rmt

moulding to R.C.C. Chhajja by making 5mm

to 15mm wide grove as per design etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

18 Brick work using Common Burnt Clay building 52.80 4495.99 Cum

bricks having crushing strength not less than

35 kg./Sq.Cm. in Super structure Above plinth

level up to All Floor levels in Cement Mortar

1:6 (1- Cement : 6 -fine sand) (Conventional)

19 Half brick masonry in common burnt clay 64.20 684.20 Sqmt

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Superstructure

above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) (Conventional).

20 Providing & Fixing Chicken mesh for joint 48.60 173.72 Sqmt

between brick work & RCC work fixing with

nail & GI washer as per director in charge

21 Providing 15mm thick cement mala plaster in 267.00 241.38 Sqmt

single coat on Rough (Similar)side of single or

half brick walls for interior plastering and

finished even and smooth fininshing with a

floating coat of neat cement slurry in (i)

Cement mortar 1:3 (1-cement:3-sand), 10x10

mm groves etc. Complete for All Floors.

22 Providing 10mm thick cement mala plaster in 246.60 215.30 Sqmt

single coat on brick/concrete walls for interior

Ceiling plastering and finished even and

smooth fininshing with a floating coat of neat

cement slurry in (i)Cement mortar 1:3 (1-

cement:3-sand). Complete for All Floors.

23 Providing 20 mm thick double coat mala 266.70 284.33 Sqmt

cement plaster on exterior brick / concrete

work for plastering comprising of base coat of

12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing

and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) Finished with

trovel including scaffolding curing etc.

24 Provding and applying Exterior grade 266.70 424.20 Sqmt

Exposed texture finish (wall texture) of

approved make and shade over prepared

surface, including surface cleaning, primer

application, base coat, texture coat application

to achieve exposed texture concrete panel

appearance with groove/joint pattern as

shown in drawing, curing, scaffolding, labour,

materials, tools and all incidental charges

complete as directed by the Engineer-in-

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

25 Applying two coats of putty & two coats of 477.60 40.59 Sqmt

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

26 Wall painting (three coats) with plastic 267.00 125.52 Sqmt

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

27 Ceiling painting (three coats) with plastic 210.60 131.02 Sqmt

emulsion paint of approved brand and

manufacture on ceiling and soffits of slab

surface to give an even shade including

throughly brushing the surface free from

mortar droppings and other foreign matter

and sand papered smooth.

28 Finishing wall with weather proof exterior 266.70 93.93 Sqmt

emulsion paint (two coats) with Damp Proof

Coating (one coat) on wall surface to give an

required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc

29 Providing and laying polished Blue Kota stone 118.50 1019.00 Sqmt

slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1:1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc.

complete. (A) 25mm thick

30 Providing and fixing pre-cast Rubber Dye / 78.30 706.93 Sqmt

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

31 Providing and fixing Machine cut & Polished 5.70 1355.42 Sqmt

Blue Kota stone in 7.5 cm width Strip flooring

for Ramp even grade over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match

the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

32 Providing and laying Vitrified tiles 8 to 10 mm 66.00 1195.02 Sqmt

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with

white cement slurry

33 Providing and laying white glazed tiles 6mm 18.90 950.53 Sqmt

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

34 Providing and laying white glazed tiles 6mm 53.40 982.03 Sqmt

thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

35 Providing and fixing Machine cut, Free edges, 1.80 2464.40 Sqmt

Mirror Polished Granite stone slab flooring

18mm thick laid on 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-

coarse sand) for Trade & Riser including Half

Round moulding front edge of trade jointed

with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and

polishing etc. complete.

36 Providing and fixing Machine cut, Free edges, 49.80 2510.86 Sqmt

Polished Granite stone slab flooring 18mm

thick for vertical wall/Doors/Windows Sill,

Jams for cladding as per design including full

moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-

coarse sand) jointed with grey cement slurry

mixed with pigment to match the shade of

slab including rubbing and polishing etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

37 Providing and fixing Machine cut Bothside 23.10 1778.61 Sqmt

mirror polished Granite stone in single piece

(Max 150 cm long and width upto 45 cm with

both side polished) for horizontal Shelves

including makng grooves & Fixing the same in

Brick/ concrete wall finished with flush

pointing, round open edge etc. complete

38 Providing and laying broken chine 155.10 779.70 Sqmt

mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme

out upto surface using white cement

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

39 Constructing Sandwich Platform of 18mm 5.10 2760.33 Sqmt

and 25 mm thick kota stone with 75cm height

with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at

bottom & edges with waterproof rigid

adhesive including making necessary grooves

in walls with vertical support of double kota

stonr sandwich every 60cm centre to centre

including all labour material of approved

quality including full moulded round front edge

fixed in wall for partition.

40 Providing & Fixing in Position mild steel door 17.40 3755.10 Sqmt

with ventilation frame 40x40x6 mm and

shutter frame 35x35x5 mm, 75x5 mm MS

flate at lock rail, 10mm square bar in vent at

10cm c/c covered with corrugated MS sheet

0.6 mm thick, including applying a priming

coat of red lead paint including cleaning the

surface of all dirt, dust and other foreign

matters (As directed by Engineer in charge &

approved drawing and design etc.)

41 Providing & Fixing in Position mild steel 31.20 4170.07 Sqmt

window with ventilation frame 35x35x5 mm

and shutter frame 25x25x5 mm, 10mm

square bar grill at 10cm c/c covered with

corrugated MS sheet 0.6 mm thick, including

applying a priming coat of red lead paint

including cleaning the surface of all dirt, dust

and other foreign matters (As directed by

Engineer in charge & approved drawing and

design etc.)

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

42 Providing & fixing M.S. Grill using 16 mm dia. 22.80 3268.36 Sqmt

M.S. Bars @ 15 cm C/C fixed in frame using

angle 35mm x 6mm, 35mm x 6mm flat in

center, and Galvanized wire mesh jali 20mm x

20mm spacing, including red lead primer coat

and two coats of oil painting etc. complete.

43 Providing erecting and fixing double coated 3000.00 3.95 Litre

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

44 Providing and fixing G.I. Rain water spout of 12.00 101.91 Nos.

50mm dia. and 30cm. length.

45 Providing, laying and jointing in true line and 52.50 876.12 Rmt

level 110 diameter U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

46 Providing, laying and jointing in true line and 30.00 834.39 Rmt

level 160 diameter U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

47 Providing laying and jointing in true line and 30.00 148.12 Rmt

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

48 Providing laying and jointing in true line and 60.00 91.84 Rmt

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

49 Providing laying and jointing in true line and 30.00 72.65 Rmt

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

50 Providing and fixing concealed center point to 30.00 253.82 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. 25 mm.

51 Providing and fixing concealed center point to 30.00 170.36 Rmt

wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF)

seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. 15 mm.

52 Providing and fixing Gun metal check or non- 6.00 663.43 Nos.

return fullway wheel valve.(E) 40mm dia.

53 Providing and fixing ball cock of approved. 3.00 189.84 Nos.

quality as directed.(A) Copper Metal (ii) 50mm

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

54 Providing and fixing water closet squatting 3.00 1637.50 Nos.

Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap

to be measured and paid for separately) (A)

Vitreous China.(I) Long pattern = White colour

including 100mm size P or S trap for water

closet squatting pan including jointing the trap

with the pan and soil pipe in cement Mortar

1:1 (1-Cement : 1-Fine sand) with 25mm dia.

chromium plated brass half trun flush cock of

approved quality including fixing in pipe line

xing G.I. inlet connection for flush pipe with

W.C. Pan etc. complete.

55 Providing and fixing washbasin (ii) Flat Back 3.00 2180.72 Nos.

washbasin 550 mm x v 400mm size. (i) In

white colour including with approved sanitary

grade material with CP waste coupling, waste

pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia

flexiable pvc pipe etc. complete

56 Providing and fixing Stainless Steel (Grade 3.00 2020.00 Nos.

304) Kitchen Sink (i) 600mm x 450mm x

200mm size of 1.2mm thickness, with sound-

dampening pads, including cutting/fixing in

platform with approved sealant, complete with

CP waste coupling, waste pipe, 15mm dia

pillar & Stop cock of approved brand with

connection 15mm dia. flexible PVC pipe,

including transportation to site and all

necessary labour for installation, etc.

57 Providing and fixing brass screw down stop 6.00 205.83 Nos.

tap.(A) 15mm dia.

58 Providing and fixing PVC SWR Nahni trap IS 9.00 586.60 Nos.

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

59 Providing and fixing S.W. gully trap with C.I. 3.00 1246.92 Nos.

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size

P or R type

60 Providing and fixing C.P. brass towel rail 3.00 616.42 Nos.

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

61 Providing and fixing in position PVC cowel 3.00 75.75 Nos.

went to pipes 110mm dia

62 Providing and fixing C.I. Manhole cover 0.60 3.00 958.17 Nos.

M. x 0.45M. size having weight not less than

63 Constructing brick masonry chamber for 3.00 7180.44 Nos.

underground C.I. inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with

three or more inlets.

64 Constructing sock pit (Kharkuva) with bricks 3.00 22179.60 Nos.

having crushing strength not less than

35Kg.Cm2 in C.M. 1:5 with (R.C.C. top slab

with 1:2:4 mix including Beams (1-cement : 2-

coarse sand : 4- graded stone aggregate

20mm size) foundation concrete 1:4:8 etc.

complete. (ii) Inside dimension 1.5x1.5x2.5 mt

deep = 7.85 Cu.mt for pipe line with one or

two inlets.

65 Providing and fixing 90 cm high Stainless 6.00 3760.33 Rmt

Steel railing made from anticorrosive

grade S.S. pipe of 50 mm dia. (16 gauge) as

hand rail with S.S.304 grade baluster of

mm dia (16 gauge) as a vertical support fixed

in RCC Slab/ steps of stair at 1.2 mt. c/c

including three horizontal S.S. pipes of 16 mm

dia (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe with baluster

including accessories as per detailed drawing

as directwed etc. complete

66 Providing and fixing M.S. Fan clamps type 1 21.00 132.25 Nos.

to 16mm dia M.S. bar bent to shape with

hooked ends to R.C.C. slabs curing, laying

including painting the exposed portion of

loops, all as per standard design complete.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

67 Providing Boarder of 25mm wide 10mm thick 20.70 133.32 Sqmt

for making the black board boundary in

cement mortar 1:4 including black painting

with enemal paint as a black board surface

etc. complete as directed.

68 Providing and fixing on wall surface of 37.20 273.71 Sqmt

different kind of educational information and

photo image on flexo material including

providing boarder patti of P.V.C. material

around the flexo and adhesive material as

69 Time Device: 3.00 505.00 Nos.

Making clocks with arms and writing figure on

60cm diameter metal or P.V.C. surface and

fixing on wall.

70 Supply and Installation of a Heavy-Duty 3.00 4545.00 Nos.

Freestanding Toddler Slide, manufactured

from UV-stabilized, non-toxic, food grade High-

Density Polyethylene (HDPE). The unit shall

feature sturdy dual-panel side support system

with integrated non-slip climbing steps.

71 Abacus as a Built Element: 3.00 1616.00 Nos.

Making Abacus for Classroom as per

approved drawing and design make with

wood or metal material etc. complete

72 Periscope: 3.00 909.00 Nos.

2- For Ground Floor building periscope

provided with 1.00m clear height with 10cm

dia pipe including fixing with 2 elbows at top

and bottom with transparent glass including

all necessary fixing with making necessary

holes and finishing it etc complete

73 PIPE PHONE CUM HANDRAIL: 7.50 993.84 Rmt

Making pipe phone by providing S.S. pipe

hand rail over ramp made of 18 gauge S.S.

material of 2" diameter single pipe handrail

with necessary fitting clamp in wall etc.

74 Providing and Supplying of heavy-duty, single 30.00 252.50 Nos.

piece molded plastic chairs specifically

designed for nursery/toddler use. The chair

shall be manufactured from high-quality virgin

Polypropylene (PP) with an antistatic and UV-

stabilized finish to prevent color fading and

dust accumulation.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

75 Providing and Fixing SS 304 Foldable 3.00 6060.00 Nos.

Checking bed having size 1.50 x 0.60 x

mm including using of 25mm dia. Pipe, SS

2mm thick, matter of 25.4 (1") of 40 density,

cover with regine cloth of approved quality

etc. completed as directed by Engineer In

76 Providing and placing IT wood writing table 3.00 7070.00 Nos.

having size 1.50 x 0.75 x 0.75 mt with one

side drawer with using of 19mm thick WP

wood, top cover with 1mm thick wood type

Formica including using of all necessary

material & labour etc. completed as directed

by Engineer incharge.

77 Providing and fixing of cloth curtain having 20.40 858.50 Rmt

length 1.8 mtr for covering of checking area

including using of alluminum sliding channel

etc complete as directed by Engineer

78 Providing and fixing of SS 304 Hanger for bag 60.00 252.50 Nos.

including using all necessary materials like SS

rail, screw etc complete as directed by

Engineer incharge.

79 Providing and fixing pin cushion display board 3.00 606.00 Nos.

having size of 1.20 x 0.75 mt including using

of alluminum section frame, 18mm thick WB

playwood, navy blue cushion cloth pin etc

complete as directed by Engineer incharge.

80 Providing and fixing PVC modular kitchen 6.30 7575.00 Sqmt

cabinet consisting of base and wall units,

made from high quality rigid PVC Boards

(minimum 15-18mm thick), including shutters,

shelves, drawers, SS hinges, telescopic

channels, handles magnetic locks, necessary

fittings, cutting, fixing, complete as per design

and directed by Engineer incharge.

81 Providing and fixing foldable MS ladder 150.30 110.77 Kg

having 0.90mt wide & 3.60mt long including

rod hinge arrangement at middle with ladder

including one coat of red oxide & two coats of

oil paint etc complete as directed by Engineer

82 Providing and fixing of hook of 10mm or 3.00 303.00 Nos.

12mm dia including drilling hole, fixing of male-

female thrade fastner sealing the same with

appoxy compound, finishing the same etc

complete as directed by Engineer incharge.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

83 Providing and fixing medical device & 3.00 1414.00 Nos.

equipment standio meter height measuring

scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete

as directed by Engineer incharge.

84 Providing and supplying standard PVC 6.00 1010.00 Nos.

(Polyvinyl chloride) Chair with handle of

approved design and make as directed by

Engineer incharge.

85 Providing and supplying standard PVC 6.00 606.00 Nos.

(Polyvinyl chloride) Stool having size 3.75 x

0.60 x 0.45mtr of approved make as directed

by Engineer incharge.

86 Providing & fixing ABC type fire extinguisher 4 3.00 1515.00 Nos.

kg ISI marked complete

87 Supplying and Fitting, consealed 3.00 50500.00 Nos.

Electrification including standard ISI mark

Copper Wire gauge minimum 3/20 and

above, 25 Nos of Lightning Point, 7 Nos of

fans, 7 Nos of Tubelight, 7 Nos of 25 Watt

CFL Points with 7 Nos of 5 Amp & 15 Amp

including and open well type horizontal mono

block pump set with stainless steel body

having following specification (A) 0.5 H.P.

Single phase electric accesory electric ELCB

20 amp with funnel type earthing and other

like tubelight and fan under supervision & as

Directed by Engineer in charge.

88 Supply, Installation, testing and 3.00 10100.00 Nos.

commissioning of a 32-inch (81cm) diagonal

LED Backlit Display Unit, featuring a minimum

resolution of Full HD (1920x1080p), a 16:9

aspect ratio, and a minimum brightness of

250 cd/m² with a wide 178° viewing angle.

The unit must include integrated stereo

speakers (minimum 5W x 2) and multiple

input/output ports, including at least 2 x HDMI,

1 x USB for multimedia playback, and an

audio-out jack. The scope includes a heavy-

duty wall-mount bracket or table top stand, a

functional remote control, and all necessary

cabling (minimum 1.5m HDMI 2.0 cable and

power cord), ensuring full compatibility with

energy-efficiency standard and a 100-240V

power supply. The quoted rate shall be all-

inclusive, covering the cost of the unit, secure

packaging, insurance, and transportation to

the designated site location.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

89 RO+UV+UF System: 3.00 10100.00 Nos.

Supplying and Installation a domestic RO

water purifier (10-12 LPH) with 7L storage,

ABS body, TDS controller, and smart LED

indicators including all inlet/oulet plumbing,

electrical connection, transportation, and

90 Excavation for foundation upto 1.5 m depth 6.90 122.99 Cum

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

91 Excavation for foundation upto 1.5 m depth 4.50 277.10 Cum

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead.(D) Soft rock not

requiring Blasting

92 Providing and laying cement concrete 1:3:6 0.90 3277.43 Cum

(1-Cement : 3-coarse sand : 6- Crushed stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

93 Constructing brick masonry chamber for 3.00 3660.76 Nos.

underground C.I. inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two

94 White Stone Bela mesonry block in course 3.90 5435.54 Cum

upto plinth level with stone of approved quality

in Cement Mortar 1:5 (1-Cement :5- course

sand) including packing the joints etc.

95 Providing 15mm thick cement plaster in single 23.10 235.32 Sqmt

coat on Rough (Similar) side of single or half

brick walls for interior plastering upto floor

two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement : 3-sand) with

floating coat of neat cement slurry.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

96 Supplying Kapachi 25mm to 40mm size as 3.90 261.45 Cum

97 Supplying of coarse clean sharp sand at site. 3.90 296.21 Cum

Total Rs.

Rupees ThirtyNine Lakh SixtyTwo Thousand Four Hundred NinetyFive and Paisa NinetySix

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of

my/our tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% Above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signeture of Contractor

Dy. Executive Engineer Executive Engineer

Panchayat R.&B. Sub Division Panchayat R.&B. Division

Prantij Himatnagar