Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3 LAccepted-AOC HIMACHAL PRADESH HP | MANDI | HIMACHAL PRADESH | 175047 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹3.4 L+₹13,507 (4.10%)Rejected-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | L2 | Rejected-Finance Due to higher bidder | |
| 3 | L3₹3.4 L+₹15,090 (4.58%)Rejected-Finance VILL LANGWAN PO LAMBLOO TESHIL DISTT HAMIRPUR 177029 | HAMIRPUR | HIMACHAL PRADESH | 177029 | L3 | Rejected-Finance Due to higher bidder | |
| 4 | L4₹3.5 L+₹23,536 (7.14%)Rejected-Finance HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171002 | L4 | Rejected-Finance Due to higher bidder |
Tender Value
₹2 L
EMD Value
₹4,000
Closing Date
20 Nov 2020, 11:00 amClosed
Executive Engineer
Executive Engineer DMC Dharamshala
C/o Balance Work of road from Barol Darnu Road to Swarn Singh house and Rajesh House with culvert in ward No.12
2020_UDDHP_42094_29
4491-96 DMC
Open Tender
Civil Works - Roads
Item Rate
90 days
Dharamshala
Please refer tender document
9 documents required · 9 mandatory
₹350
Comm. DMC Dharamshala
₹4,000
29 Sept 2021
6 Nov 2020
20 Nov 2020
6 Nov 2020
20 Nov 2020
6 Nov 2020
Amount
Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick WORK including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in edges of slab and breaks in floors and walls under 20cm wide including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:4:8 (1 cement:4sand : 8graded stone aggregate 25 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinthin breast and retaining wall including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:3:6 (1 cement:3sand : 6graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in:Walls including attached but tresses,pilasters, and their caps and bases and string courses etc. upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing mild steel/Tor steelreinforcement for R.C.C. work including bending,binding and placing in position complete uptofloor two level :Tor Steel including carriage of material in all leads and lift and direction of Engineer-in-charge.
Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately) including carriage of material in all leads and lift and direction of Engineer-in-charge.
rakesh kumar
Madan Lal
shyam lal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .