Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

ABSTRACT OF COST-CIVIL

S NO ITEM OF CIVIL WORK

All Figures are in Rs. All Figures are in Rs.

2.00 Concrete Work 15,93,351.10 0.00

8.00 Flooring Work 46,41,026.90 0.00

9.00 Roofing Work 6,50,109.75 0.00

10.00 Finishing Work 30,59,889.70 0.00

13.00 Stilt Floor Parking works 15,19,755.90 0.00

14.00 Rainwater Harvesting Work 2,08,829.30 0.00

15.00 Miscellaneous Work. (Modular kitchen & Wardrobe) 13,87,909.61 18,56,716.70

Total Amount 4,34,28,115.59

Total Amount 4,34,28,115.59

Contractor 2 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

BILL OF QUANTITIES: CIVIL

DSR 2023/ MR Amount

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

1.00 2.0 EARTH WORK

Surface dressing of the ground including removing vegetation and

1.01 2.28 inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m

and lift up to 1.5 m.

2.28.1 All kinds of soil. 571 Sqm 34 ₹19,499.65

Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm

on plan) including getting out and disposal of excavated earth lead upto 50 m and

lift upto 1.5 m, as directed by Engineer-in-charge.

2.6.1 a) All kinds of soil 554 Cum 178 ₹98,335.00

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to

50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 310 Litre 234.75 ₹72,772.50

2.35 Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL

1.06 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 563 Sqm 310.05 ₹1,74,558.15

Total Earth Work : ₹6,07,158.55

2.00 4.0 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - All work up to plinth level:

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6

graded stone aggregate 40 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded

stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4

2.02 4.10 (1 cement : 2 coarsesand (zone-III): 4 graded stone aggregate 12.5mm nominal 326 Sqm 410.85 ₹1,33,937.10

Contractor 3 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Extra for providing and mixing water proofing material in cement concrete work in Per 50 kg

doses by weight of cement as per manufacturer's specification. cement

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of

approved quality using 1.7kg per square metre on damp proof course after

cleaning the surface with brushes and finally with a piece of cloth lightly soaked in

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3

coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20

mm nominal size derived from natural sources) over 75 mm thick bed of dry brick

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine

sand, including necessary excavation, levelling & dressing & finishing the top

Extra for laying concrete in or under water and/or liquid mud including Cumper mt

cost of pumping or bailing out water and removing slush etc. complete. depth

Total Cement Concrete work : ₹15,93,351.10

3.00 5.0 R.C.C. WORK

Providing and laying in position ready mixed or site batched design mix cement

concrete for reinforced cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources, Portland Pozzolana / Ordinary

Portland /Portland Slag cement, admixtures in recommended proportions

as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of

3.01 5.33 concrete to site of laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per direction of the engineer-

in-charge, for the following grades of concrete.: Note: Extra cement up to 10%

of the minimum specified cement content in design mix shall be payable

separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either

re-design the mix or bear the cost of extra cement.

5.33.1 All works upto Plinth level

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum 120 Cum 9504.75 ₹11,40,570.00

3.02 5.33.2 All works above plinth level upto floor V level

5.33.2.2 Concrete of M25 grade with minimum cement content of 330 kg /cum 300 Cum 9860.40 ₹29,58,120.00

Add for using extra cement in the items of design mix over and above the

specified cement content therein.

Contractor 4 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Reinforcement for RCC work including straightening, cutting, bending, placing

in position and binding all complete at all level and height. up to plinth level.

Reinforcement for RCC work including straightening, cutting, bending, placing

in position and binding all complete at all level and height. up to plinth level.

5.22A.6 TMT bars of grade Fe-550D. (above plinth level) 53342 Kg 107.85 ₹57,52,934.70

Centering and shuttering including strutting, propping etc. and removal of form for

a) 5.9.1 Foundation, footing, bases of columns etc. for mass concrete 84 Sqm 392.15 ₹32,940.60

b) 5.9.3 Suspended floors, roofs, landings, balconies and access platform 1530 Sqm 927.25 ₹14,18,692.50

c) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers 1290 Sqm 736.40 ₹9,49,956.00

d) 5.9.7 Stairs, (excluding landings) except spiral-staircases 45 Sqm 764.95 ₹34,422.75

e) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 571 Sqm 961.30 ₹5,48,902.30

Small lintels not exceeding 1.5 m clear span, moulding as in cornices,

f) 5.9.15 window sills, string courses, bands, copings, bed plates, anchor blocks and the 20 Sqm 392.15 ₹7,843.00

g) 5.9.16 Edges of slabs and breaks in floors and walls

Walls (any thickness) including attached pilasters, butteresses, plinth and string

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.

Total R.C.C. Work : ₹1,51,86,119.00

4.00 6.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of

4.01 6.4 class designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement: 6 coarse sand) 294 Cum 9105.95 ₹26,77,149.30

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 629 Sqm 1123.80 ₹7,06,870.20

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

Total Brick Work : ₹34,49,938.70

Contractor 5 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

5.00 8.0 Marble WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills,

facias and similar locations of required size, approved shade, colour and

5.01 8.2 texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment, epoxy touch

ups, including rubbing, curing, edge moulding, facia and polishing to edges to

give high gloss finish etc. complete at all levels.

8.2.2 Granite Stone Slab of Colour Black, Cherry/Ruby red

Extra for providing opening of required size & shape for wash basin/ kitchen

sink in kitchen platform, vanity counter and similar location in marble/ Granite/

stone work, including necessary holes for pillar taps etc. including moulding,

rubbing and polishing of cut edges etc. complete.

Total Marble Work : ₹13,62,609.90

6.00 9.0 Wood WORK

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with

dash fasteners of required dia & length (hold fast lugs or dash fastener shall be

paid for separately).

9.1.1 Second class teak wood 2.5 cum 142949.70 ₹3,57,374.25

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-

section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter

of 30 mm thickness. The laminate shall be moulded with fire resistant grade

9.121 unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm

thick and shall be filled with suitable wooden block in all the three legs. The frame

shall be covered with fiber glass from all sides. M.S. stay shall be provided at the

bottom to steady the frame

6.03 9.122 Providing and fixing to existing door frames 103 metre 570.95 ₹58,807.85

Contractor 6 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled

door shutter of required colour and approved brand and

manufacture, made with fire - retardant grade unsaturated

polyester resin, moulded to 3 mm thick FRP laminate for

forming hollow rails and styles, with wooden frame and suitable

blocks of seasoned wood inside at required places for fixing

of fittings, cast monolithically with 5 mm thick FRP laminate

for panels conforming to IS: 14856, including fixing to frames.

Providing & Fixing decorative high pressure laminated sheet of plain / wood

grain in gloss / matt / suede finish with high density protective surface layer

and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,

including cost of adhesive of approved quality.

Extra for providing lipping with 2nd class teak wood battens 25 mm

6.05 9.23 minimum depth on all edges of flush door shutters (over all area of door shutter 78 Sqm 462.35 ₹36,063.30

to be measured).

Providing and fixing aluminium sliding door bolts, ISi marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868), transparent or

dyed to required colour or shade, with nuts and screws

etc. complete :

Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc.

Providing and fixing bright finished 100 mm mortice lock with 6 levers

6.08 9.113 without pair of handles of approved quality for aluminium door, with necessary 50 Each 850.05 ₹42,502.50

screws etc complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel fancy handle of approved make fixed with SS

screws etc. complete as per direction of Engineer-in-charge.

Contractor 7 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Providing and fixing aluminium hanging floor door stopper, ISi marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws etc.

9.101.2 Twin rubber stopper 50 each 72.35 ₹3,617.50

Providing and fixing aluminium die cast body tubular type universal hydraulic door

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 35 kg and door width upto 700 mm), with necessary accessories and screws

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate

20mm nominal size).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors

6.13 (cost of glass excluded) (overall area of door shutter to be measured):

9.24.1 Rectangular or square 21 Sqm 199.15 ₹4,182.15

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors

comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler

(where ever required) extruded profiles having minimum wall thickness of 1.70

mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles

conforming to EN: 12608 in any shape, colour and design duly reinforced with

galvanized mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor

(where ever required) of appropriate dimension, EPDM gasket, hardware, SS

304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to

finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and

necessary stainless steel screws etc. Profile of frame, sash & mullion (if required)

shall be mitred cut and fusion welded/mechanically jointed duly sealed at

all corners, including drilling of holes for fixing hardware and drainage of

water etc. After fixing frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealant over backer rod of approved size

and quality, all complete as per approved drawing conforming to CPWD

specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge.

Contractor 8 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/

without high performance coatings as per design requirements and conforming to

IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof

checked from a Government Engineering Institute, to be provided by the

manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875

- Part 3 (ii) Sites with

structure height more than 20m for all wind speeds

Note:- Structural design proof checked from a Government Engineering Institute,

to be provided by the manufacturer for (i) Sites with basic wind speed > 45

m/sec as per IS 875 - Part 3 (ii) Sites with

structure height more than 20m for all wind speeds

Three track three panels sliding window with two glazed & one wire mesh

9.147.A4 panels with Aluminium channel for roller track, wool pile, nylon rollers with SS

Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed

i) 9.147.A4.1 and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) 9 Sqm 10993.55 ₹98,941.95

powder coated touch locks with hook. (Height upto 1.2 metre).

Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed

and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak)

powder coated handle on every glazed panel along with multi- point locking

system. (Height above 1.8m)

iii) 9.147.C1 Fixed window/ ventilator without mullion / transom.

using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto

Total Wood Work : ₹30,44,524.13

Contractor 9 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

7.00 10.0 STEEL WORK

Steel work welded in built up sections/ framed work, including cutting, hoisting,

7.01 10.25 hinges, ms handle as required, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates, safety grilled door

and similar works

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),

7.02 10.27 counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve,

including drilling of hole in frame , concrete/ masonry, etc. as per direction

of Engineer-in-charge.

Total Steel Work : ₹24,72,603.10

8.00 11.0 FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid on 20 mm thick

cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing

8.02 11.41A with grey cement slurry @3.3 kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only .Laying of tiles will be done with the notch trowel, plier,

wedge,clips of required thickness, leveling system and rubber mallet for placing

the tiles gently and easily

11.41A.1.3 Double charge vitrified tile polished finish of size:Size of Tile 600 x 1200 mm 1618 Sqm 1577.15 ₹25,51,828.70

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement, including cement slurry,

but excluding the cost of nosing of steps etc. complete. - 40 mm thick with 20 mm

nominal size stone aggregate

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10

kg of hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge

Contractor 10 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Deduct for not grouting the joints with white cement and matching pigment

in the items of fixing of vitrified tiles.

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

cement slurry and pointing with white cement slurry admixed with pigment

of matching shade including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in

Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby

8.07 11.24 Extra for pre finished nosing to treads of steps of marble stone. 120 Metre 719.90 ₹86,388.00

Total Flooring Work : ₹46,41,026.90

9.00 12.0 ROOFING

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed

with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and

G.I. limpet washers or with G.I. limpet washers filled with white lead, including a

9.01 12.1 coat of approved steel primer and two coats of approved paint on overlapping of

sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),

excluding the cost of purlins, rafters and trusses and including cutting to size and

shape wherever required.

12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² 435 SQM 1457.15 ₹6,33,860.25

Providing ridges or hips of width 60 cm overall width plain G.S sheet fixed with

9.02 12.4 polymer coated J or L hooks bolts and nuts 8 mm dia G.I limpet and bitumin

washer complete

12.4.1 0.80 mm thick with zinc coating not less then 275 gm/m2 15 metre 1083.3 ₹16,249.50

Total Roofing Work : ₹6,50,109.75

Contractor 11 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

10.00 13.0 FINISHING

13.4 12 mm cement plaster of mix :

13.16 6 mm cement plaster of mix :

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

10.03 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 736 Sqm 518.55 ₹3,81,652.80

cement : 6 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for

every additional height of 3 m or part thereof.

Wall painting with premium acrylic emulsion paint of interior grade, having

VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved

10.05 brand and manufacture, including applying additional coats wherever required to

achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including

priming coat of exterior primer applied @ 2.20kg/10 sqm

10.08 13.114 Melamine polishing on wood work (one or more coat). 306 Sqm 1192.30 ₹3,64,843.80

Providing and applying white cement based putty of average thickness 1 mm, of

10.09 13.80 approved brand and manufacturer, over the plastered wall surface to prepare the 3880 Sqm 156.05 ₹6,05,474.00

surface even and smooth complete.

Total Finishing Work : ₹30,59,889.70

Contractor 12 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

11.0 22.0 WATER PROOFING

PU +0.3mm PVC membrane (Category A, Type 1) combines a flexible Polyvinyl

Chloride (PVC) substrate with a Polyurethane (PU) surface layer, creating a thin,

highly durable PVC membrane suited for waterproofing, protective covers, and

outdoor signage.

It will be used for waterproofing in Toilets 1.2mm Single component PU + 1mm

thick PVC Membrane, (Category A, Type IV): A composite waterproofing

specification comprising a 1.2 mm liquid-applied single-component polyurethane

(PU) and a 1.0 mm flexible polyvinyl chloride (PVC) membrane (Category A, Type

IV) delivers a robust, monolithic seal. This high-performance system

accommodates structural movement and ensures superior puncture and chemical

resistance in demanding environments.

It will be used for waterproofing in Terrace. 1.5mm Fully Bonded HDPE

membrane: 1.5mm fully bonded, pre-applied HDPE waterproofing membrane is

engineered to form an integral mechanical/adhesive bond with fresh concrete.

This prevents lateral water migration and withstands high hydrostatic pressure.

It will be used for waterproofing on the outer horizontal surface.

1.2mm thick HDPE membrane: 1.2mm thick HDPE (High-Density Polyethylene)

membrane is a commercial-grade, pre-applied or self-adhesive waterproofing

It delivers extreme puncture resistance, high tensile strength, and excellent

resistance to hydrostatic pressure and aggressive ground

It will be used for waterproofing on the inner vertical surface.

Swellable Rubber (hydro expensive): Swellable rubber (hydrophilic water stops)

are active sealing strips designed to expand upon contact with water, creating a

pressure-resistant, watertight seal in concrete

construction joints.

It will be used for waterproofing in water stops.

Waterproofing of basements: It is done with 75mm guniting with 1:4 cement sand

mortar to the R.C.C. elements, after cleaning the surface off dust dirt including

providing and fixing 100 x 100 x 10G welded

mesh and applying adhesive chemical Conbond SNA as required.

Contractor 13 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Providing and applying of swellable type water stop tape, 19 mm x 25 mm thick in

linear metre (expansive nature) for construction joints treatment of RCC structure

such as raft slab, retaining walls, water storage tank and at the junctions of raft

slab with the retaining walls etc.. After cleaning the surface, one coat of required

11.02 22.26 primer for swellable water stop tape shall be applied throughout the length of the 95 mts 573.45 ₹54,477.75

joint @3.78 litre per 240 running metre. Over the primed surface swellable type

water stop tape shall be placed. The work shall be carried out all complete as per

specification and the direction of the Engineer-In-Charge. The product

performance shall carry guarantee for 10 years against any leakage.

"1.2mm Single component PU + 1mm thick PVC Membrane, (Category A, Type

IV), complying to IS 15909 on the mother/ RCC slab Additionally, 2-component

acrylic cementitious coating with protection of fiberglass mesh/ fabric over the

insulation/ screed concrete made for required slope/ drainage."

Providing and laying 1.5mm Fully Bonded HDPE membrane, complying to IS

Total water proofing work : ₹8,55,365.75 ₹2,24,500

12 20 PILE WORKS

Boring, providing and installation bored cast-in-situ reinforced cement concrete

piles of grade M-30 of specified diameter and length below the pile cap, to carry a

safe working load not less than specified, excluding the cost of steel reinforcement

but including the cost of boring with bentonite solution and temporary casing of

12.01 20.2 appropriate length for setting out and removal of same and the length of the pile to

be embedded in the pile cap etc. by percussion drilling using Direct mud

circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch

Machine all complete, including removal of excavated earth with all its lifts and

leads (length of pile for paymentshall be measured up to bottom of pile cap).

Vertical load testing of piles in accordance with IS 2911 (Part IV) including

installation of loading platform by Kentledge/Anchor piles method and

preparation of pile head or construction of test cap and dismantling of test cap

20.6 after test etc. complete as per specification & the direction of Engineer in-

12.02 charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic

method of testing. Note: 2. Testing agency shall submit the design of loading

platform for the approval of Engineer-in-charge.

20.6.1 Single pile upto 50 tonne Safe capacity

20.6.1.1 Initial test (Test Load 2.5 times the Safe capacity) 5 per test 54771.50 ₹2,73,857.50

Contractor 14 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

12.03 20.6.1.2 Routine test (Test Load 1.5 times the Safe capacity) 5 per test 19632.40 ₹98,162.00

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test

method in accordance with IS :14893 including surface preparation of pile top

20.9 by removing soil, mud, dust & chipping lean concrete lumps etc. and use of

computerised equipment and high skill trained personal for conducting the test &

submission of results, all complete as per direction of Engineer-in-charge.

Note :- The inclusion of the above item in the schedule of work shall be

judiciously decided by the technical sanctioning authority, keeping in view the 50 per test 1153.20 ₹57,660.00

quality control, type of soil strata & importance of the project.

Total Pile work : ₹13,07,707.50

13.0 16.0 STILT FLOOR - PARKING WORKS

Preparation and consolidation of sub grade with power road roller of 8 to

12 tonne capacity after excavating earth to an average of 22.5 cm depth,

13.01 16.1 dressing to camber and consolidating with road roller including making good the 555 Sqm 218.90 ₹1,21,489.50

undulations etc. and re-rolling the sub grade and disposal of surplus earth with

lead upto 50 metres.

Providing and laying factory made chamfered edge Cement Concrete paver

blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of

required strength, thickness & size/ shape, made by table vibratory method

using PU mould, laid in required colour & pattern over 50 mm thick compacted

13.02 16.91 bed of sand, compacting and proper embedding/laying of inter locking paver

blocks into the sand bedding layer through vibratory compaction by using

plate vibrator, filling the joints with sand and cutting of paver blocks as per

required size and pattern, finishing and sweeping extra sand. complete all as per

direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-35 grade with approved colour design and

Construction of granular sub-base by providing close graded Material

conforming to specifications, mixing in a mechanical mix plant at OMC, carriage

of mixed material by tippers to work site, for all leads & lifts, spreading in

uniform layers of specified thickness with motor grader on prepared surface

and compacting with vibratory power roller to achieve the desired density,

complete as per specifications and directions of Engineer-in-Charge.

Contractor 15 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having

Providing and laying at or near ground level factory made kerb stone of M- 25

grade cement concrete in position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making

13.04 16.69 joints with or without grooves (thickness of joints except at sharp curve shall

not to more than 5mm), including making drainage opening wherever

required complete etc. as per direction of Engineer-in-charge (length of finished

kerb edging shall be measured for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge). 4 Cum 10117.60 ₹40,470.40

Providing and fixing concertina coil fencing with punched tape concertina

coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos

rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y'

shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced

barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including

13.05 16.53 necessary bolts or 88 Metre 375.80 ₹33,070.40

G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-

charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire

of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and

weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi

tracks/ runways, using cement content as per design mix, using coarse sand and

graded stone aggregate of 40 mm nominal size in appropriate proportions as

per approved & specified design criteria, providing dowel bars with sleeve/ tie

bars wherever required, laying at site, spreading and compacting

mechanically by using needle and surface vibrators, levelling to required

slope/ camber, finishing with required texture, including steel form work with

13.06 sturdy M.S. channel sections, curing, making provision for contraction/

expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by

groove cutting machine, providing and filling joints with approved joint filler

and sealants, complete all as per direction of Engineer in-charge (Item of joint

fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement

used as per design mix is payable/ recoverable separately.

16.43.1 Cement concrete prepared with batch mixing machine 85 Cum 10529.35 ₹8,94,994.75

Contractor 16 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Extra for finishing the concrete surface with vacuum dewatering process using

tremix equipment with vacuum pump and suction mat to remove excess water

13.07 MR followed by floating and trowelling with power floater and disc pass to achieve 561 Sqm 111.00 ₹62,271.00

hard wearing non slip textured surface all complete as per direction of engineer in

Extra for providing and mixing hardening compound of approved quality

as per manufacturer's specification in cement concrete.

Providing and fixing pre-moulded joint filler in expansion joints of RCC

roads / CC pavements after making the joints dust free with high pressure per cm

air jet cleaners, all complete as per direction of the Engineer-in-Charge. depth per

13.09 16.45 (Pre-moulded joint fillers shall be made of bitumen hot sealing 160 cm width 5.30 ₹848.00

compound impregnated fibre board having impregnation more than 35%, per metre

conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen length

compound grade A.)

Painting runway/taxi track/apron marking with adequate nos of coats to give

uniform finish with road marking paint of superior make as approved by the

Engineer-in-charge, including cleaning the surface of ail dirt, scales, oil, grease

and other foreign material etc. and lining out complete.

16.47.1 New work (Two or more coats) 33 Sqm 188.20 ₹6,210.60

Total Road Work: ₹15,19,755.90

14.00 23.0 RAINWATER HARVESTING

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20

14.01 23.5 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as 14 Cum 1509.80 ₹21,137.20

per direction of Engineer-in

Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in

14.02 23.6 the recharge pit, over the existing layer of boulders, in required thickness, for all 14 Cum 1538.25 ₹21,535.50

leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm

14.03 23.7 in recharge pit, in required thickness over gravel layer, for all leads & lifts, all 14 Cum 1538.25 ₹21,535.50

complete as per direction of Engineer -in- charge.

Gravel packing in tubewell construction in accordance with IS: 4097,

14.04 23.8 including providing gravel fine/medium/coarse, in required grading & size as per 14 Cum 2024.50 ₹28,343.00

actual requirement, all complete as per direction of Engineer-in-charge.

Contractor 17 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

Replacement of M.S. foot rests in manholes including dismantling concrete

14.05 19.17 blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size):

19.17.2 With 20x20 mm square bar 12 each 621.95 ₹7,463.40

14.06 19.19 Providing and fixing in position precast R.C.C. manhole cover and frame.

19.19.3.1 Circular shape 560 mm internal diameter 2 each 1675.70 ₹3,351.40

Supplying, assembling, lowering and fixing in vertical position in bore well

Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS:

12818, including hire & labour charges, fittings & accessories etc. all complete, for

all depths, as per direction of Engineer-in-charge.

23.4.2 150 mm nominal size dia 35 metre 807.45 ₹28,260.75

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of

required shape and approved quality

19.19.1.1 Rectangular shape 600x450 mm internal dimensions 1 each 1437.65 ₹1,437.65

Constructing brick masonry chamber for underground C.I. inspection chamber and

bends with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) C.I. cover with

frame (light duty) 455x61 O mm internal dimensions, total weight of cover with

frame to be not less than 38 kg (weight of cover 23 kg and weight of

frame 15 kg), R.C.C. top slab with 1: 1.5:3 mix (1 cement : 1.5 coarse sand : 3

14.09 19.30 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine

sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm

thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand), finished smooth with

a floating coat of neat cement on walls and bed concrete etc. complete as

standard design:

Inside dimensions 455x610 mm and 45 cm deep for single pipe line :

19.30.2 With common burnt clay non-modular bricks of each class designation 7 .5 6 each 8150.50 ₹48,903.00

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey

14.1 19.32 comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.Bm long

complete as per standard design.

19.32.1 With common burnt clay non-modular bricks of class designation 7.5 1 each 26861.90 ₹26,861.90

Total Rainwater Harwesting Work ₹2,08,829.30

Contractor 18 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

15.00 MISCELLANEOUS WORK

Boring, providing and installation bored cast-in-situ reinforced cement concrete

piles of grade M-30 of specified diameter and length below the pile cap, to carry a

safe working load not less than specified, excluding the cost of steel reinforcement

but including the cost of boring with bentonite solution and temporary casing of

appropriate length for setting out and removal of same and the length of the pile to

be embedded in the pile cap etc. by percussion drilling using Direct mud

circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch

Machine all complete, including removal of excavated earth with all its lifts and

leads (length of pile for paymentshall be measured up to bottom of pile cap) :

230 mm dia piles

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type

knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18 mm thk. ISI Marked multiwood ply of approved make and quality, all

multiwood surface to be laminated with 0.8 mm thick approved quality laminate.All

shelves should be supported on approved quality SS pins and shall be

adjustable for different heights as per requirements.Shutters and drawers

fascia shall be at least 18mm thick with laminate on both sides with 18mm

wide 2mm thick PVC edge banding including approved make plate tray and

32" GTPT complete with fixing accessories. All Shutters finished in high gloss

acrylic finish of approved make and shade. The cabinet boxes of floor units will be

supported by 100mm height vertical adjustable legs which will be covered

with PVC skirting in brushed aluminum finish attached by hardware of skirting.

The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate

size and rawl plugs. Only front face area of cabinets and skirting from floor

to top of boxes shall be considered for measurement and payment. Cabinet

boxes size would be varies from 400X560X710MM to 1000X560X710MM

(approx.) and join together as per site requirements etc.

Contractor 19 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type

knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18 mm thk. ISI Marked marine ply. All ply to be laminated with 0.8 mm

laminate.All shelves should be supported on approved quality SS pins and shall

be adjustable for different heights as per requirements.Shutters and drawers

15.02 MR fascia shall be at least 18mm thic with laminate on both sides with 18mm 13 Sqm 8857.00 ₹1,15,141

wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic

of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from

floor to top of boxes shall be considered for measurement and payment.

Cabinet boxes size would be varies from 400x560x710MM to

1000x560x710MM (approx.) and join together as per site requirements etc.

WARDROBS: Providing and fixing custom wardrobes (with either openable hinged

shutters or sliding door systems as per specific design) complete with carcass,

internal divisions, drawers, premium laminates, and all necessary heavy-duty

hardware. Measurement shall be taken on the basis of the overall external front

elevation area in sqm. The work shall be executed as per wardrobe detail

drawings and the direction of the Engineer-in-Charge. The rate shall include the

complete execution of the following sub-components:

Sub-Components (Included in the Main Item Rate): A. Carcass & Structural

I. Main Frame & Internals: Fabricating the carcass, internal partitions, shelves, and

drawer units using 18 mm thick BWR/BWP grade plywood. II. Backing: Providing

and fixing a 6 mm thick BWR plywood back panel, chemically treated for anti-

termite and borer resistance. III. Shutters: Fabricating door shutters using 18 mm

thick block board or BWR grade plywood (to prevent warping).

B. Surface Finishes & Edge Treatments

I. Exterior Finish: Finishing all exposed external faces with 1.0 mm thick decorative

laminate of approved shade and texture. II. Interior Finish: Finishing all internal

and unexposed faces (including inside drawers and carcass) with 0.8 mm thick

balancing liner laminate. III. Adhesives: All laminates to be machine-pressed or

pasted using marine-grade (BWP) synthetic resin adhesive. IV. Edge Banding:

Sealing all exposed raw edges of plywood/blockboard perfectly with 2 mm thick

machine-pressed PVC edge banding tape matching the laminate finish. C.

Common Hardware & Accessories

Contractor 20 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

I. Drawers: Supplying and fixing full-extension, heavy-duty soft-close telescopic

drawer channels.

II. Hanging Provision: Supplying and fixing heavy-duty SS hanging rods with

matching end-brackets.

III. Security & Handles: Providing multi-purpose wardrobe locks and SS profile or

D-handles of approved design.

IV. Fasteners: All internal joinery and hardware fixing to be executed using SS 304

15.03 MR grade non-corrosive screws. 69 Sqm 10500.00 ₹7,24,500

D. Door Mechanisms (To be provided as per specific room design)

I. W 1 - For Hinged Openable Shutters: Providing and installing heavy-duty soft-

close SS concealed hinges (Auto-closing type).

II. W 2 - For Sliding Shutters: Providing and installing a heavy-duty aluminium

sliding track system (top and bottom) equipped with smooth nylon rollers, soft-

close dampers, and vertical dust-blocking brush seals along the shutter edges.

Makes as per approved make list

TV CABINATE-Overall Size

TV Unit Size: 8'-0" × 7'-0" (Width × Height).

2. Material-Complete TV unit shall be made of 19mm thick high-quality plywood.

3. Finish-Premium/Advance quality wood laminate finish shall be provided on all

visible surfaces of the TV unit.

Colour and texture shall be as approved by the Engineer/Client.

4. Shelving Arrangement-Five (05) shelves shall be provided on each side of the

TV panel.Shelves shall be properly supported and aligned for storage and display

15.04 MR 5. TV Panel-Central space shall be designed for mounting/display of LED/LCD 6 nos 56000.00 ₹3,36,000

TV.Necessary provisions for cable management and electrical wiring shall be

6. Hardware & Accessories-All screws, fittings, edge bands, adhesives, and

accessories shall be of premium quality. Finished edges shall be smoothand

neatly polished.

7. WorkmanshipThe complete TV unit shall be rigid, level, properly finished, and

free from defects.

Installation shall be completed in a professional manner with all necessary fixing

Contractor 21 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

16.00 ELEVATION

Stone tile (polished) work for wall lining over 12 mm thick bed of cementmortar 1:3

16.01 8.9 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in

white cement complete.

8.9.1.2 8mm thick granite of any colour and shade 145 sqm ₹3,617.55 ₹5,24,544.75

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement 48.5 sqm ₹1,267.95 ₹61,495.58

mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all levels etc. including: in

an approved laboratory, field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection of the curtain wall

with aluminium composite panel cladding till the handing over of the building for

occupation. Base frame work for ACP cladding is payable under the relevant

aluminium items. The Contractor shall provide curtain wall with aluminium

composite panel cladding, having all the performance characteristics all complete ,

as per the Architectural drawings, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer-in-Charge. However, for

the purpose of payment, only the actual area on the external face of the curtain

wall with Aluminum Composite Panel Cladding (including width of groove) shall be

measured in sqm. up to two decimal places.

(a) Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to make

it watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite

panel cladding in pan shape in metalic colour of approved shades made out of 4

mm thick aluminium composite panel material consisting of 3 mm thick FR grade

mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick).

The aluminium composite panel cladding sheet shall be coil coated, with Kynar

500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour

and shadeon face # 1 and polymer (Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant,

backer rods etc.

Contractor 22 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S No Description of Item Qty Unit Rate DSR NON DSR

All Figures are in All Figures are in

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip

Galvanised with serrations and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316,

Nylon separators to prevent bi-metallic contacts all complete required to perform

as per specification and drawing The item includes cost of all material & labour

component, the cost of all mock ups at site, cost of all samples of the individual

components for testing

17.00 MR MS FIRE STAIRCASE

Steel work welded in built up sections/ framed work, including cutting,hoisting,

10.25 fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including useof chequered plate

wherever required, all complete

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works 550 kg ₹172.60 ₹94,930.00

Providing and fixing hand rail of approved size by welding etc. to steel ladder

10.26 railing, balcony railing, staircase railing and similar works, including applying

priming coat of approved steel primer.

Supply,installation of canara bank logo and signage etc complete as per design

and direction of Engineer incharge complete.

Total MISCELLANEOUS WORK ₹13,87,909.61 ₹18,56,717

Contractor 23 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690

mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting,

of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern

fittings, nuts, bolts and gasket etc complete.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of

approved quality and make, including painting of fittings and brackets, cutting and making good the

walls wherever required:

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets

and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good

the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular

4 17.16A plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge EACH 19 ₹349.15 ₹6,633.85

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by

Engineer in charge.(a) 15 mm nominal dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

complete. Flexible pipe 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

8 17.31 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and EACH 19 ₹1,607.95 ₹30,551.05

washers complete.

9 17.34.1 Providing and fixing toilet paper holder : CP Brass EACH 19 ₹803.70 ₹15,270.30

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and

colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance

11 17.71 from wall of standard shape with bracket of the same materials with snap fittings of approved quality EACH 19 ₹168.35 ₹3,198.65

and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum

12 17.72 distances of 37 mm from wall face with concealed fittings arrangement of approved quality and EACH 19 ₹231.95 ₹4,407.05

colour, weighing not less than 88 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass

screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail

with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190

Contractor 24 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

14 18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser

points of approved quality conforming to IS : 8931

15 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms EACH 19 ₹121.40 ₹2,306.60

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3

17.61 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand):

17 18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 19 ₹416.80 ₹7,919.20

18 18.78 Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface

after housing G.I. pipe etc.

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

19.1 18.7.2 20mm nominal outer dia pipes METRE 180 ₹335.00 ₹60,300.00

19.2 18.7.3 25mm nominal outer dia pipes METRE 150 ₹401.55 ₹60,232.50

19.3 18.7.4 32mm nominal outer dia pipes METRE 120 ₹518.75 ₹62,250.00

19.4 18.7.5 40mm nominal outer dia pipes METRE 100 ₹702.95 ₹70,295.00

19.5 18.7.6 50mm nominal outer dia pipes METRE 60 ₹934.15 ₹56,049.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with

20 18.8 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

20.1 18.8.1 15mm nominal outer dia pipes METRE 180 ₹497.80 ₹89,604.00

20.2 18.8.2 20mm nominal outer dia pipes METRE 150 ₹537.60 ₹80,640.00

20.3 18.8.3 25mm nominal outer dia pipes METRE 120 ₹627.25 ₹75,270.00

20.4 18.8.4 32mm nominal outer dia pipes METRE 100 ₹739.30 ₹73,930.00

Contractor 25 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS: 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with

or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers

etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

21 from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround

MR 1:2:4 cement concrete (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal

size) including cost of shuttering for proper completion of the work, breaking and making

good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring

shall confirm to IS:5382

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5

mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

22 MR Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 19 ₹1,200.00 ₹22,800

23 18.49 Providing and fixing C.P. brass bib cock of approved quality to

conforming to IS 8931.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

24 18.51 and weighing not less than 690

a 18.51.1 15 mm nominal bore Each 2 ₹798.95 ₹1,597.90

25 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS : 8931.

26 18.9.6 50mm nominal outer dia pipes Meter 100 ₹794.25 ₹79,425.00

Contractor 26 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

27 18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end).

a 18.17.1A 20 mm nominal bore Each 24 ₹539.95 ₹12,958.80

b 18.17.1 25 mm nominal bore Each 1 ₹622.40 ₹622.40

c 18.17.2 32 mm nominal bore Each 1 ₹689.60 ₹689.60

d 18.17.3 40 mm nominal bore Each 4 ₹826.10 ₹3,304.40

28 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

a 18.18.3 25 mm nominal bore Each 6 ₹464.05 ₹2,784.30

29 18.21 Providing and fixing unplasticised PVC connection pipe with brass unions.

18.21.1 30 cm length

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701

30 18.48 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and Litre 9000 ₹11.00 ₹99,000.00

overflow pipes but without fittings and the base support for tank

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and

dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil,

and then returning the soil as required, in layers not exceeding 20 cm in depth including

31 consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated

soil as directed, within a lead

2.10.1 All kinds of soil

a 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Meter 100 ₹352.15 ₹35,215.00

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick

masonry chamber with water tight C.I. cover with frame of 300 X 300 mm size (inside) the weight of

32 cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design :

19.4.1 100 X 100 mm size P type

a 19.4.1.2 With Sewer bricks conforming to IS : 4885 Each 10 ₹2,685.20 ₹26,852.00

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with R.C.C.

top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate

40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse

sand) finished with floating coat of neat cement and making channels in cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per standard design :

Contractor 27 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

19.7.1 Inside size 90 X 80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 X

610 mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of

cover 23 kg and

weight of frame 15 kg):

a 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 8 ₹12,711.80 ₹1,01,694.40

34 19.7.3 Inside size 120 X 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 560

mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of

cover 108 kg and

weight of frame 100 kg)

a 19.7.3.2 With Sewer bricks conforming to IS : 4885 Each 1 ₹32,719.50 ₹32,719.50

35 19.8 Extra for depth of manholes

a 19.8.1 Size 90x80cm

19.8.1.2 With Sewer bricks conforming to IS : 4885 Meter 8 ₹8,654.25 ₹69,234.00

b 19.8.2 Size 120x90cm

19.8.2.2 With Sewer bricks conforming to IS : 4885 Meter 1 ₹10,381.45 ₹10,381.45

36 19.27 Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1

cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame

complete as per standard design :

a 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 12 ₹5,957.90 ₹71,494.80

Supply, Installation, testing and commisioning of Domestic Water Pumps(to lift water from

MR underground domestic water tank to terrace tank of building)Location - Near underground water

37 (a) Capacity 1 LPS each minimum

RPM 2800 / 2 HP

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticized

38 MR Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS: 5382, leaving 10mm gap for thermal expansion.

Contractor 28 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR 2023/ DESCRIPTION DSR NON-DSR

MR UNIT QTY RATE All Figure are in All Figure

39 12.41 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams

40 18.52.1 Providing and fixing brass stop cock of approved quality. 15 mm nominal bore Each 25 ₹353.25 ₹8,831.25

41 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate

40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm Meter 110 ₹1,179.85 ₹1,29,783.50

diameter S.W. pipe

42 MR Core cutting for plumbing work

Contractor 29 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULE OF QUANTITIES - DISMANTLING & DEMOLISHING WORK

S NO DSR DESCRIPTION QNTY UNIT RATE DSR NON-DSR

2023/ All Figure are in All Figure are in

DISMANTLING & DEMOLISHING WORK

1 15.3 Demolishing R.C.C. work manually or by mechanical means including stacking of steel

bars and disposal of unserviceable material within 50 metres lead as per direction of 80 CUM ₹3,551.25 ₹2,84,100.00

Engineer-in-charge.

2 15.2.2 Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in - charge. Nominal 25 CUM ₹1,503.60 ₹37,590.00

concrete 1:4:8 or leaner mix.

3 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of 130 CUM ₹2,060.20 ₹2,67,826.00

Engineer-in-charge. In Cement mortar

4 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of 30 Each ₹367.20 ₹11,016.00

area 3 sq. metres and below

5 15.19 Dismantling steel work manually/ by mechanical means in built up sections without

dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. 2750 Kg ₹3.85 ₹10,587.50

6 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead. For thickness of tiles 10 mm to 25 mm

7 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.

8 15.42.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking

the material within 50 metres lead. 75 to 80 mm dia pipe

9 15.44.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means including stacking of pipes within

50 metres lead as per direction of Engineer-in-charge 15mm to 40 mm nominal bore

10 15.52 Dismantling of all types of flushing cisterns (C.I./PVC/Vitreous China), including stacking

useful materials and disposing of waste within a 50-metre radius

11 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all

complete as per directions of Engineer-in-Charge.

12 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to approved

municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

13 15.28.1 Dismantling including ridges, hips, valleys,and gutters etc. and stacking the material

within 50 mtr. GI Sheet

Contractor 30 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

BILL OF QUANTITIES: HORTICULTURE

DSR 2025/ DSR NON DSR

S No Description of Item Qty Unit Rate

MR ITEMS All Figures are in All Figures

Rs. are in Rs.

1.00 Tress description

Areca palm having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and

healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot.

Rhapis Palm having ht. 75 cm to 90 cm with 15 to 18 suckers, well developed, full of fresh

and healthy leaves from bottom to top in 35 cm Plastic Pot/ Cement Pot.

Ixora singaporensis different colour having 30 cm and above ht., well developed with fresh

& healthy foliage with bloom in 25 cm Earthen Pot/Plastic Pot.

4 10332 Polyalthia pendula (Ashok Pendula) height 180-195 cm. in gunny bag size 30 cm 10 NOS ₹90.00 ₹900.00

5 10355 Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag 2 NOS ₹90.00 ₹180.00

Plumeria Pixi well developed fresh & healthy foliage 60 cm to 75 cm ht. bushy plant in 35

cm Cement Pot/Plastic Pot.

7 10305 Lagerstroemia flosreginae height 150-165 cm.in poly bag size 25 cm 4 NOS ₹108.00 ₹432.00

8 10334 Putranjiva roxburghii height 90-105 cm. in polybag size 25 cm 5 NOS ₹41.00 ₹205.00

2 Earth preparation

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of

serviceable materials and then disposing of surplus soil, by spreading and neatly levelling

1 2.1 within a lead of 50 m and making up the trenched area to proper levels by filling with earth 48.5 cum ₹119.00 ₹5,771.50

or earth mixed with sludge or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead

complete (earth measured in stacks will be reduced by 20% for payment).

2.7 Fine dressing of the ground. 120 sqm ₹5.60 ₹672.00

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching

the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking

clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of

earth after reduction by 20% : one part of stacked volume of sludge or manure after

reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine

dressing, leveling etc. including stacking and disposal of materials declared unserviceable

and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5

m complete (cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with

manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after

2.14 reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be paid for

2.14.2 Holes 90 cm dia, and 90 cm deep 15 each ₹155.50 ₹2,332.50

Contractor 31 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

DSR 2025/ DSR NON DSR

S No Description of Item Qty Unit Rate

MR ITEMS All Figures are in All Figures

Rs. are in Rs.

Edging with bricks laid dry length wise, including required excavation, refilling, consolidating

with hand packing and spreading surplus earth neatly within a lead of 50m :

2.19.1 Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 125 metres ₹48.50 ₹6,062.50

Contractor 32 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated

copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch,

A.1 modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper

conductor single core cable etc. as required

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core

A.2 cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC

insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single

core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

1.24 including connections but excluding

modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 1 ₹136 ₹136.00

1.24.5 6 pin 15/16 amp socket outlet Each 1 ₹219 ₹219.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular

plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for

modular switches in recess etc. As required.

Contractor 33 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular

plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper

conductor single core cable etc. as required.

A.8 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Each 84 ₹545 ₹45,780.00

switch, connections etc. as required.

A.9 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular Each 40 ₹659 ₹26,360.00

switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

A.11 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess

including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Each 1 ₹807 ₹807.00

curve including connections, painting etc. as required.

B SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR

PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 250 ₹267 ₹66,750.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 3 ₹373 ₹1,119.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 ₹482 ₹24,100.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 90 ₹1,078 ₹97,020.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 90 ₹1,454 ₹1,30,860.00

C CABLES TERMINATION

11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following

C.1 size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as

Contractor 34 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable

of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 3.5 C x 35 Sqmm XLPE cable RM 13 ₹496 ₹6,448.00

(b) 3.5 C x 50 Sqmm XLPE cable RM 13 ₹670 ₹8,710.00

(c) 3.5 C x 70 Sqmm XLPE cable RM 13 ₹886 ₹11,518.00

(d) 3.5 C x 95 Sqmm XLPE cable RM 25 ₹1,124 ₹28,100.00

(e) 3.5 C x 120 Sqmm XLPE cable RM 38 ₹1,389 ₹52,782.00

(g) 4 C x 16 Sqmm XLPE cable RM 50 ₹272 ₹13,600.00

D.2 MR Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 63 ₹1,882 ₹1,18,566.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 25 ₹2,946 ₹73,650.00

(c) 3.5 C x 35 Sqmm XLPE copper cable RM 13 ₹3,434 ₹44,642.00

D.3 10.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc as required.

E.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB

DB complete etc. as required.

2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

E.3 Supplying and fixing following rating, four pole, 415 volts, MCB in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

2.4 earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/

RCCB/ Isolator)

Contractor 35 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution

board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar,

common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current

E.6 2.14 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

E.7 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240

V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator)

2.3.3 12 way, double door Each 2 ₹2,871 ₹5,742.00

F CEILING & EXHAUST FAN

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular plate etc. as required.

Installation, Testing and Commissioning of exhaust fan in the existing opening, including

making good the damage, connection, testing, commissioning etc. as required.

F.3 Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes.

Brush Less Direct Current (BLDC) Fan with Remote Supply, Installation, Testing and Commissioning of

ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,

copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as

F.4 9.1 below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)less than 10%,

remote (preferably mobile app based) for speed control and all remaining accessories including safety

pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c

external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc as required

9.1.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min ( Each 36 ₹2,882 ₹1,03,752.00

Contractor 36 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

F.5 MR Supply of Exhaust Fan 300 mm Each 6 ₹3,433 ₹20,598.00

F.6 DSR Providing and fixing M.S. Fan clamps of 16 mm dia M.S. bar, bent to shape with Hooked ends in R.C.C.

10.1 slabs or beams during laying, including painting the exposed portion of loop, all as per standard

design complete

Providing and fixing circular/Hexagonal G.I. Box for ceiling fan clamps, of internal dia 140 mm, 73 mm

DSR height, top LID of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top LID shall be

10.1 screwed into the G.I. box by means of 3.3 mm dia rounded screws, one lock at the corners. Clamps shall

be made of 12 mm dia M.S. bar bent to shap as per standard drawing.

Supply , Installation, Testing and Commissioning of wall mount fan with sweep size 450 mm

F.8 MR oscillating type , with heavy duty copper wound motor , pull cord /speed control arrangment suitable for 230 Each 1 ₹3,825 ₹3,825.00

v, 50 Hz AC supply , including fixing MS bracket on wall complete as required

G.1 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 SET 3 ₹8,351 ₹25,053.00

Meter long etc. with charcoal/ coke and salt as required.

G.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in

recess for connections etc. as required.

G.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

G.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 50 ₹84 ₹4,200.00

G.5 6.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single

prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 ₹609 ₹609.00

G.6 6.2 Fixing of lightning conductor finial (single prong) with base plate includ Each 1 ₹422 ₹422.00

G.7 6.3 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by

riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning

conductor complete as required.(For vertical run)

Contractor 37 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

H.1 40.1 Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following

specifications, type of lens and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio:>50 dB, Camera should display Camera title, Date &

Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image

even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day

& Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)-

Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night,

Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control

, White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726,

AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2MP (1920

×1080)@25/30 fps,Sub streams minimum: 720P@25/30 fps).

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client

or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security

logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade,trusted boot.

9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It

10) Recording Management: Format SD, overwrite, storage management, video to NAS device

11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP

conflict detection; memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE,

NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast

13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per

site requirement. 16) Power Input: The camera should

support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure

continuous operation in the event of a failure in one power source.

17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE

18) Housing/ Enclosure:- IP67 weather proof, IK10,Metallic body

19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing)

20) IR life: 40000 hours or higher

21) Video Bit rate: 32 KBPS - 8 MBPS or better

2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome

Camera with 2.8/ 3.6mm fixed lens

Contractor 38 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with

camera licenses to record for all channels having specifications and features etc as mentioned below :

1) Network Video Recorder Embedded/ Installed OS(Linux) along with Camera Licenses for number of

channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel

playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming

Bandwidth.2) NVR should support H.265 or better, H.264,MJPEG, MPEG4 support 3) Must support 1

channel Input, 1 channel Output, RCA for Two-way Talk 4) Intelligent auto power on when power resumes

after power outage. 5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot. 6)

Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232 7) Backup

Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0) 8) Video Output Ports: 1x HDMI and 1

VGA 9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and

H.2 40.10 output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to

minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network

disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android

Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP,

UPnP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G),

CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC,

RoHS and BIS Certified 14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power

supply. 15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-

condensing) 16) The VMS, NVR application shall support all the features & functionalities of the offered

cameras. 17) VMS should consist of Base license and Channel Licenses. VMS should be provided with

camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to

achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application

Contractor 39 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP

address for remote monitoring over the Internet. 20) Must support Resolution: 7680x4320 (8K),3840*2160,

1920×1080, 1280×1024,1280×720,1024×768 21) Must support recording resolution upto 32MP 22) Must

support Continuous, Alarm, Motion, Instant, Panic Recording Mode 23) When alarm recording is enabled

occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is

supported on monitoring and playback page 24) The Network Video Recorder (NVR) shall be configured to

send email whenever a system message is created or an alarm event occurs. The email server shall be a

valid SMTP server. Each recipient email

address shall be configured to receive any combination of critical, warning, or informational messages or

alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a

list of camera that is configured to record upon alarm 25) It should support Network Support: HTTP,

TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert multiple recording files to

one avi/MP4 file. 26) General AI Based Search: Search Pictures by channel, time, event type, target

classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying

Detection, Violence Detection. 27) Alarm Notifications based on: Motion detection, video tampering, video

loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter

protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map,

Disk Full, Storage Error, IP Conflict and abnormal behavior of fan 28) Alarm Notification should be linked

with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 29) Built-In

Artificial Intelligence: NVR should have built-in AI : - 2 Channel face detection and recognition, - Minimum

4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face Recognition

Database Capacity: It should support total Blacklist and Whitelist capacity of

Contractor 40 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions,

face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 32) ANPR Capability: It should

support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling,

seatbelt, vehicle registration location etc vehicle attributes. 33) Alarm Notifications based on: Motion

detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection,

face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis,

crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan,

cybersecurity exception 34) Alarm Notification should be linked with Recording, snapshots, Camera external

alarm output, buzzer, logs, presets and email. 35) General AI Based Search: Search Pictures by channel,

time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception

Detection, People Staying Detection, Violence Detection. 36) Smart playback function: Should support

smart search for the selected area in the video and smart playback to improve the playback efficiency 37)

VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytic

08 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9, 2nd screen: 1/4/8/9

Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network

Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit

Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity

of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table. Internal dual AC

Power supply with operating temperature of -5 0C to +50 0C. Jumbo frame: 10KB or higher, IGMP

Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more

MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP,

Loopback detection, Multicast filtering, VLAN Tagging, ǪOS: 8 Ǫue per port, WRR, IPv4/IPv6 Interface :

minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Acess Control

entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening,

IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS

database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic

feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL,

CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of

8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting

H.4 39.18.1 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in

existing conduit/ on surface, U/FTP, LSZH, NonPlenum, Horizontal (solid) Cable suitable for high speed

data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted

Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e.

Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568

C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter

should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required. 1

Contractor 41 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

I.1 29.1 Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or

better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging

power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory

and site with fuel, load for test and other

necessary arrangements Complete as per CPWD specifications, should have QR code which should

contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant

IS Code etc. and consisting of the followings:

(A) Diesel Engine:

Tourbocharged Diesel engine 4 stroke water cooled,multi cylinder, dynamically balanced fly wheel, electric

start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 0C, 50% RH & at 1000

Meter MSL , capable of taking 10% over loading for one hour after 12 hours of continuous operation. The

engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel

(after commissioning) lubricating Oil, Coolant and other consumables complete with all the required

accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB

norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as

per CPWD specifications.

(B) Engine mounted Instrument Panel fitted with and having digital dis Plate for following:

(i) Start-stop switch with key (ii) Water temperature indication

(iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication

(v) Battery charging indication and Voltage indication (vi) RPM indication

(vii) Over speed indication

(viii) Low lubricantion Oil trip indication

(ix) Engine Running Hours indication

Contractor 42 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

(C) Alternator:

Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with

0.8 lagging power factor at 40 0C, 50% RH & at 1000 Meter MSL. The alternator shall be having Screen

Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor,

capable of taking 10% over loading for one hour after 12 hours of continuous operation, self cooled,self-

excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for

tropical conditions and with class- H insulation.

(D) Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable base frame made of MS channel with

necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration

isolation arrangement as per recommendations of manufacturer.

Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick

M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with

MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per

specifications.

(F) Exhaust System:

Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor.

(G) Starting System:

12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial

excitation complete with suitable numbers of batteries (180 AH capacity lead acid SMF type) as required as

per specifications. The battery shall be housed inside the acoustic enclosure of DG Set

Contractor 43 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

(H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine &

alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the

enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable

connection/connection through bus-trunking. Such

arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection.

The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications.

Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for

KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and

energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt

Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted

earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter

between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all

complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS

integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by

Engineering in charge and including the following:

1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle

type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip.

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power

relay and 2 Nos. under voltage relay).

4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L N & L_L), kW, kVA (Phase & Total), Frequency,

6. LED Indicating lamps for load on mains and load on set

7. Fuse/ MCB for instruments

Contractor 44 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

8. Battery charger, complete with transformer/ rectifier,218 D.C. voltmeter and ammeter, selector switch for

trickle, off and boost and current adjustment.

9. Main supply failure monitor

10. Supply failure timer

11. Restoration timer

12. Control unit with three impulse automatic engine start/stop and failure to start lockout.

13. Impulse counter with locking and reset facility.

14. ON/OFF/Control circuit switch with indicator

15. Audio/Video annunciation for

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable

number of relays and accessories

17. Maintenance notification based on Engine Run Hour & due date.

18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler

switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give

command to DG Set to auto start / auto stop depending upon load status and requirement etc. and

necessary hardware and software required to perform the operation shall be provided by the contractor

including all control wiring

Contractor 45 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

J.1 24.12 Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 5 Star

rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3

Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic

grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH

or better, suitable for out door/indoor applications with Offload Tap Changer in range of +5% to -15% in

steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sqmm XLPE cable of 11 KV grade,

including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore

control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and

safety provisions as per relevant IS Code including first

filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and

transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per CPWD specifications

complete in all respects etc as required at site . The maximum flux density in any part of the core and yoke

at rated voltage and frequency shall be such that the flux density with + 12.5 percent combined voltage and

frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible

temperature-rise shall not exceed 35 0C for oil and 40 0C up to 200 KVA and 40 0C for oil and 45 0C for

above 200 KVA for winding. Inside of tank shall be painted with varnish or liquid resistant paint.

For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two

coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness for

normal to medium corrosive atmosphere. For highly polluted atmosphere and special application external

paint work shall be as per direction of

Engineer-in-Charge. Design ambient condition : a) air temperature 500C, b) Relative Humidity 90 % Max,

c) Seismic Zone as per location of site,

Contractor 46 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA TR-1 with all accessories

running measured as per IEC 551 / NEMA standard. The transformer should have QR code which should

contain drawing, test report OEM manual,Geo- Tag of manufacturing location etc. Marking Each

transformer shall be provided with rating plate made of anodized aluminium/ stainless steel material

securely fixed on the outer body, easily accessible, as per IS: 1180 Part-3. The entries on the rating plate

shall be indelibly marked. Fitting and Accessories : The following fittings shall be provided:- a) Two earthing

terminals with the earthing symbol b) Oil level gauge indicating oil level at minimum, 30°C and maximum

operating temperature; c) Air release device (for non-sealed type transformers) d) Rating and terminal

marking plates; e) Silica gel breather f) Drain-cum-sampling valve (¾ ″ nominal size thread, IS

554)preferably steel with plug for three phase transformers; g) Thermometer pocket with cap; h) Oil filling

holes having (1¼″ nominal size thread) with cover (for sealed type transformers without conservator); i)

Lifting lugs for the complete transformer as well as for core and winding assembly; j) Pressure relief device

or explosion vent above 200 kVA; k) One filter valve on the upper side of the tank (for transformers above

200 kVA); l) Unidirectional flat rollers (for transformers above 200 kVA); m) Inspection hole (for transformers

above 200 kVA); n) HV side neutral grounding strip (where one of the HV bushing terminal is connected to

earth); o) Buchholz relay for transformers above 800 kVA.

p) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil temperature

indicator and winding temperature indicators for transformers above 200 kVA with suitable tripping

mechanism above permissible limit s) Jacking pads (for transformer above 1 600 kVA); t) Additional

Neutral separately brought out on bushing for earthing. u) Magnetic oil level gauge (for transformer above

1600 kVA) with low oil level alarm contact; v) Non return valve (for conducting pressure test); w) Pressure

relief device or explosion vent x). Monogram Plate y) Inspection cover z). Detachable type radiators with top

and bottom shutoff valve. aa) Oil Conservator with Oil level indicator, minimum level marking and drain plug

for all transformers of capacity 50 KVA and above. bb) Necessary hardware, clamps, lugs etc. for

termination on HV/MV etc. for all transformers.(where one of the HV bushing terminal is connected to

earth); o) Buchholz relay for transformers above 800 kVA. p) Arcing horns or suitable rating lightning

arrestors for HT side – 3 Nos. q) Bird guard; r) Oil temperature indicator and winding temperature indicators

for transformers above 200 kVA with voltage and frequency does not exceed 1.9 Tesla. The permissible

temperature-rise shall not exceed 35 0C for oil and 40 0C up to 200 KVA and 40 0C for oil and 45 0C for

above 200 KVA for winding. Inside of tank

Contractor 47 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

J.2 25.1 Automatic Power Factor Correction (APFC) System Supply, Installation, testing and commissioning of

Automatic Power Factor Correction (APFC) panel, indoor type floor mounted free standing totally enclosed,

extendable, IP 42, of following capacity for 3 phase, 415 V + 10 %, 50 Hz AC System for Ambient

temperature -5°C to +40°C, fabricated in compartmentalised designed made of CRCA sheet steel of 2.0mm

thick for framework & covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank

process for powder coated of approved shade ( RAL 7032-Siemens Gray or as approved by Engineer-in-

Charge), having front section (switch gear and control accessories) and rear section capacitor and reactor,

front and rear access, having suitable current carrying capacity, extensible TPN Aluminium alloy bus bar of

high conductivity, DMC/SMC bus bar supports, bottom base channel of MS Section, fabrication shall be

done in transportable section, entire panel shall have common copper earth bar of minimum size of 25mm x

5mm with 2 nos. earth studs, the earth terminals provided on the body of capacitor bank shall also be

bonded to the main capacitor panel earth bus with 2 nos. 8 SWG or 6 SWG GI earth wires/equivalent size

of copper conductor cable, forced ventilation for maintaining temperature rise not more than 5°C from

ambient, interconnections, connections with 14% detuned reactor and heavy duty 525 V ISI marked

Impregnated MPP(Metalized Polypropylene) Capacitor (IS 13340 Part -1 & 2) APFC Panel shall be in

compliance with IS :16636 & CPWD Specifications etc. as per below details. (A) Incomers Suitable capacity

MCCB Microprocessor base with O/C, S/C, E/L release of TPN 50KA breaking capacity (Ics=Icu), ON, OFF,

Trip, R, Y, B - LED Indicating Lamp set along with required Instruments and accessories with extended

rotary handle and door interlocking arrangement.

Contractor 48 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

Current rating of the Incomer in ampere shall be APFC Panel rating in KVAR x 1.4 x 1.5 or Nearest higher

standards rating. (B) Instruments & Indicationsi) 3-Phase current sensing APFC microprocessor

relay/controller , advance 8/12 stages (8 stages for capacity below 100 KVAR and 12 stages 100 KVAR &

above) with Communication Ethernet/RS485/SNMP port open protocol for BMS integration as per approved

by Engineering in charge and having display of Phase wise V, A, PF, Cos-Phi, Kw, KVA, KVAR, THD-V ,

THD-I, harmonics up to 31 level. 3 nos of dual core CT's accuracy class 1, 15VA at incomer of PCC Panel

for APFC relay. ii) Auto Manual Selector switch, auxiliary contactors with timer for delay in manual mode.

iii) Digital Multi function meter with LED Display for V, A, PF, KW, KVA, KVAR, THD-V & I, Frequency. iv)

Suitable rating control transformer shall be provided for control and indication circuit. v) All components like

control transformer, meter, relay and indicating lamp shall be protected by using suitable rating individual

MCB's. vi) Wiring of the control circuit shall be done by using 2.5 sq mm, FRLS/HFFR 1100 V grade, PVC

insulated multi stranded copper control wire. (C) Bus Bars 1.3 Amp per Sq.mm,TPN, Electrolytic grade

Aluminium bus bar of capacity 1.25 times of (iv) 14% Detuned Reactor of class H insulation & 150%

linearity in series with Capacitor. (Note: Technical specifications sheet for selection of the capacitors

combinations shall be provided by the NIT Approving Authority with due consideration of number of

capacitors i.e. 1 KVAR, 2 KVAR, 3 KVAR, 5

KVAR, 10 KVAR.for smooth correction). incomer rating as per CPWD specification. (D) Outgoings (APFC

Section) Selection of the capacitors combinations shall be for continuous rating and each capacitor bank

shall have suitable capacity Heavy Duty ISI Marked Capacitor, capacitor duty contactor,the capacitor shall

be mounted on channel with base of perforated M S Powder coated sheet, connections inter connections

etc. and other features as per CPWD Specifications and relevant IS Code having following: (i) Capacitor

bank ratings & stages shall be as per the technical specifications sheet of NIT. (ii) Capacitor will be MPP

self healing type with discharge resistor, pressure release mechanism.

(iii) Since Capacitor Voltage is 525 Volts, thus higher KVAR has to be considered to get rated output at

Contractor 49 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

K POLE ERECTION

Erection of metallic pole of following length in cement

concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 40 mm nominal size) foundation

including excavation and refilling etc. as required. Above 4.5 Meter and upto 6.5 Meter

Supply of steel tubuler pole 8.5 meter long designated 410 SP-23 (Bottom Portion Hot Dip

Galvanized) complete in all respects.

K SOLAR PHOTOVOLTAIC POWER PLANT

Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant

conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity

Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly

Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing,

cabling, mounting structure, junction boxes, power conditioning units, Real time online web

interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits,

pipes, cable trays and other accessories etc. as required.

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in

India,conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar

Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature

coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems

must be warranted for their output peak watt capacity, which should not be less than 90% at the

end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in

relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV

module used in any solar power project must have Radio frequency identification tag with

information such as name of manufacturer, month and year of manufacturing, country of origin

(separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module,

Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. b)Power Conditioning Unit (PCU)

of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output

voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency

not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature

from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data

logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP.

Contractor 50 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

PCU/inverter shall be capable of complete automatic operation including wake-up,

synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to

IEC standard with shutdown/standby mode. It must be provided with grid islanding along with

manual disconnect pole isolation switch besides automatic disconnection. Minimum protections:

Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge

voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid

synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum

parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3

phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other

parameters applicable standard. Communication interface RS 485 / RS 232. c) Module mounting

structure: The roof top solar plant generation units shall be installed by using supporting

Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having

minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting

structure would be designed to sustain wind load and seismic parameter of the site of installation.

All the structure shall be design as per applicable BIS code and the material shall also confirm the

applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible

with the materials used in the module frame, its fasteners, nuts and bolts. The suitable

arrangements for maintenance and cleaning shall be provided. d) Real time online web interfaced

Data Monitoring System complete with accessories for various parameters such as Solar

Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input

Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters

as per standard practices.

Contractor 51 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for

incoming and outgoing cable along with glands, lugs and other accessories etc. as required. Each

junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full

dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide

Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable

Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. f)

Lightning, surge voltage protection, earthing protection and grid is landing. g) Cables: Connections Kwp 10 ₹54,280 ₹5,42,800.00

& Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV

grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary

channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. h)

DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having

copper bus bar, having required protection and control gears, connection-interconnection, etc. as

Contractor 52 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

S NO DSR DESCRIPTION NON-DSR

UNIT QTY RATE

2025 All Figure are in All Figure are

L SOLAR WATER HEATER

L.1 16.1 SOLAR WATER HEATING SYSTEM (Evacuated Tube Collector) Supplying, Installation, Testing,

Commissioning of following capacity Evacuated Tube Collector (ETC) Solar Water Heating System

comprising of all glass ETC tube absorber. The inner layer of absorber shall be of solar selected

absorbing coated tube, Vacuum jacket, cover glass tube, getter and getter mirror surface, as per IS

16543. The system shall have temperature gauges, strainer, 2 nos. water meters, Suitable capacity

cold and hot water tank, all MS structure for installation including suitable electric control panel

complete with control and power wiring, necessary pluming including piping for cold and hot water

line between tank and solar water system, water heater and thermostat including non-return valve,

float valve and other valve etc. as required. The various component shall have following

1. The Absorber area i.e. the number, dimension and thickness of solar evacuated tube as per

IS:16544 clause 5.4 and IS: 16543 clause 4.2

2. Boro Silicate Glass 3.3 for cover plat as per ISO: 3585.

3. The material for three target coating shall be aluminum nitrate, aluminum nitrate stainless steel

and copper multi layer selecting coating as per IS: 16543.

4. Manifold shall be of Mild steel section with PP coating and Inner material shall be of SS 304.

5. Recommended operating pressure:10 Bars.

6. The capacity of hot water tank shall be minimum 1.5 times the rated capacity system. Inner

Material shall be Stainless Steel SS 316 b) as per IS 1730 grade SS304-2B (22SWG). The hot

water tank shall be insulated with high density injected PUF insulation 50 mm thickness between

inner and outer tank. Tank stand shall be of mild steel and shall be design to withstand wind

velocity of 100km/hours (minimum) or more as per site.

7. Suitable nos. ISI Marked electrical heaters along control panel, with suitable breaker, all

protections, and all safety provisions so as to achieve 60 0C temperature rise in an hour. The

range of thermostat shall be upto 80 ℃.

M METERING CUBICLE FOR ELECTRICITY CONNECTION

Supply installation, testing commissioning of KSEB metering system for obtaining service

connection, including preparation of schematic drawings, taking approvals from authorities, testing

of units,commissioning etc complete including HT panels,cable etc complete as per direction of

NS Engineer incharge

Total of Electrical items ₹50,00,493.40 ₹8,91,057.00

Contractor 53 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULE OF QUANTITIES: LIGHTING FIXTURES

Description QTY Unit RATE

No 2025/M All Figure All Figure

R are in Rs. are in Rs.

LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt ) Supplying, Installation, Testing & Commissioning of

LED Recessed/surface Down lighter (Round / square/Rectangular) COB Type of following body material and construction

as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short &

Open circuit protection ,THD < 10% , P. F. ≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker

should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours

with, 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching)<3, Maximum power consumption should not more than the specified

rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen

printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED

fixtures. "complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated

copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System

lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures

as per BIS shall be submitted Shape size and CCT shall be as approved by Engineer-inCharge as per

requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise

above 90°C). Powder coated die cast/ Extruded aluminium Body including trim with Aluminium Reflector

LED Batten light (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface

mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the

requirement with Driver efficiency >85% ,Operating voltage AC 140 270 Volt, frequency 50/60 hz, Operating temp range

-5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F. ≥0.95, IP20,

CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum

50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K

/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for

LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as

per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall

not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Contractor 54 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

Description QTY Unit RATE

No 2025/M All Figure All Figure

R are in Rs. are in Rs.

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).

Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die

cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage:

140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as

per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F. ≥0.95, IP-66,IK-10, CRI>70,

under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type

I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time

(LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained

till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections

with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all

testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED

junction temperature shall not rise above 90°C).

Supply, Installation, Testing and Commissioning of Integral, SMD 4x1 Backlit LED Panel, IP 20, 30W LED recessed

mounted fixture with system efficacy of minimum 100lm/W and system lumen output of minimum 3000lm, operating

in ambient temperature of 0 ⁰C to 45⁰C at 50Hz frequency. Luminaire shall have CRCA housing coated in white (RAL9016)

with translucent HET diffuser for uniform illumination and wider light distribution. LEDs used in the product

shall comply with IEC 62471. LM 80-08 compliant LEDs should be provided. The LED shall comply with L70 life of

50000 burning hours tested at maximum current. The LEDs used should be with CCT of 4000 K and CRI of

4 MR Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat 6 nos 3500.00 ₹21,000

dissipation suitable to operate in input voltage range of 140V to 300V (nominal rated voltage – 240V) with

4KV internal surge protection, Power factor of minimum 0.95 and total harmonic distortion (THD) of less than or

equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of

science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 :

Contractor 55 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

Description QTY Unit RATE

No 2025/M All Figure All Figure

R are in Rs. are in Rs.

Supply, Installation, Testing and Commissioning of 20W, recessed/suspended by 1.5m suspension wire, 4 feet

linear, IP40 from front, SMD LED luminaire with system efficacy of 120 lumen/watt and system lumen output of

2400 lumen, operating in an ambient temperature of 0 ⁰C to 45⁰C. Operating at 50Hz frequency, luminaire shall

have extruded aluminium housing in white with high efficiency translucence diffuser and must have provision for end

to end seamless connectivity. EMC package of wattage of 0.2-0.5 W LEDs used in the product shall comply with

IEC 62471 for Photo-biological safety. LM 80-08 compliant LEDs should be provided. The LED shall comply with

L70 life of 50000 burning hours tested at maximum current. The LEDs used should be with CCT of 4000/5700

K and CRI of Minimum 80, with MacAdam CCT binning ≤3 mounted on 1.6mm FR4 / MCPCB with 35 micron cu layer.

LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable

to operate in input voltage range of 140V to 300V (nominal rated voltage – 240V) with 4KV internal surge protection,

Power factor of minimum 0.95, driver efficacy of minimum 85% and total harmonic distortion (THD) of less than or

equal to 10% should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry

of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS

15885 (Part2/Sec13) : 2012; IS 16108 : 2012.Dimension: 1204 X 50 X 75mm, weight: 1.6Kg with all connectors to

give continous cascading effect wherever required as per the directions of engineer in charge

Supply, Installation, Testing and Commissioning of 1200mm dia Pendent Mounted Ring LED. Fixture to be

made of extrusion Aluminum housing in white finish with HET plastic diffuser. LED Used shall be SMD type with

Minimum system Lumens 4800 @60W & efficacy 80lm/W,Life of fixture : 50000 burning Hrs. @ L70 Lumen

maintenance, CCT of 4000/5700K (SDCM<=3), CRI Ra >=80, PF >0.95, operating Voltage Range of 150-270 V AC.

Minimum Internal Surge Protection 2.0KV. LED driver should have CISPR 15 / EN 55015 compliance to limit for radio

disturbance characteristics. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India.

LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture

and Driver should have separate BIS approval.

Contractor 56 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

Description QTY Unit RATE

No 2025/M All Figure All Figure

R are in Rs. are in Rs.

Supply, Installation, Testing and Commissioning of 30W LED Decorative Post Top type luminaire with System efficacy of

120 lm/W (3600 lumens), suitable for external poles of dia. 60mm to 75mm. Fixture dimension: 480X470mm,

height: 550mm (including PDC base). Light fixture should have Dark Sky certification to avoid light pollution and power

wastage. Luminaire shall be made up of pure polyster power coated RAL7021 pressure die cast Aluminium housing with

PC lens and tempered glass with street light optics. All external hardwaremust be of SS304 grade. LM 80-08 compliant

LEDs of EMC/ceramic package should be provided. LEDs used in the product shall comply with EN 62471 for

Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 and

IK07 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current

(Complete LM 80 test report for LED should be submitted for 10000 hrs of testing) with ambient operating temperature -

7 MR 10° to +45° C. The LEDs used should be with CCT of 4000/5700 K, CRI of Minimum 70 and SDCM <5. LEDs must be 4 Nos 14523.00 ₹58,092

driven at max 70% of the rated current. MCPCB with Aluminium core and copper thickeness of 35 micron to be used for

LED mounting. LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC.

Driver Efficiency > 85% & 5 KV internal surge protection, 10KV external surge protection, Power factor greater

than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. OEM should provide

Dark Sky Certificate mentioning the name of the item along with unique ID issued by "Dark Sky International".

Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM79 and LM80

reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian

Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108

: 2012 should be there.

Supply, Installation, Testing and Commissioning of 11W LED Decorative Bollard with System lumen output of

300 lumens. Luminaire shall be made up of dark grey, pure polyester power coated extruded Aluminium housing

specially design to provide beautiful light pattern on ground surface. Light fixture should have Dark Sky certification to

avoid light pollution and power wastage. Fixture dimension: 150X150mm, length: 1004mm, weight: 4.3Kg. LM 80-08

compliant LEDs of EMC/ceramic package should be provided. LEDs used in the product shall comply with EN 62471 for

Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP65

protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum

current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used

should be with CCT of 3000 K, CRI of Minimum 70 and SDCM <5. LEDs must be driven at max 70% of the

rated current. MCPCB with Aluminium core and copper thickness of 35 microns to be used for LED mounting. IP65

rated LED Driver shall be silicone potted, Integrated type, Isolated, Constant Current with range 140-280V AC. Driver

Efficiency > 80% & 2.5KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion

(THD) of less than 10% should be integral to the luminaire. OEM should provide Dark Sky Certificate mentioning the

name of the item along with unique ID issued by "Dark Sky International". Manufacturer shall have inhouse lab

approved by NABL or ministry of science of govt of India. LM79 and LM80 reports need to be submitted from a

NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect

2012 should be there.

Contractor 57 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

Description QTY Unit RATE

No 2025/M All Figure All Figure

R are in Rs. are in Rs.

Supply, Installation, Testing and Commissioning of 18W recessed, deep inset COB LED Downlight luminaire having 1620

lumens with dimensions of 92mm x 92mm and height of 56mm. The cut out dia (Φ) should not be more than

85mm x 85mm. Luminaire shall be made up of pure polyster powder coated pressure die cast Aluminium housing with

inbuilt heat sink to provide better thermal management to enhance LED life. The luminaire should be equiped

with the secondary optics of high efficiency polycarbonate lens to provide UGR < 19. The luminaire should have beam

angle of 70°.LM 80-08 compliant ceramic / aluminium base LEDs should be provided. LEDs used in the product shall

comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided.

The luminaire should be IP20 rated. The LED shall be compliant with LM80-08 standard with L70 life of 50000

Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The

LEDs used should be with CCT of 4000/5700 K and CRI of Minimum 80. LED Driver shall be IP20 rated, non-

integrated type, Isolated, Constant Current operated driver with range 100-265V AC. Driver Efficiency > 85% & 2.5 KV

internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10%

should be integral to the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of

govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above

parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS

Supply, Installation, Testing and Commissioning of LED based Spike light, housing made up of pressure die

cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of

manufacturer and optics made of surface mount reflector with toughened. The fixture should have a minimum

system efficacy of 80lumen/Watt and a minimum system lumen output of 640 lumens and maximum system wattage of

8 Watts.The fixture shall have a CRI of minimum 80 and beam angle: 50-55deg. The fixture shall be designed

for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP67 (lamp and gear

Compartment) and Mechanical Impact Resistance Rating of IK >=07, CCT: 2700K. The fixture driver should have an

operating voltage range of 100-270 V, surge protection of >=3KV, PF >0.9, THD<10% & Driver efficacy >80% @full load

and rated voltage. Ambient temp range: 0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board

without casing, mounted inside the luminaire. The fixture should comply with the parameters as per IS10322.

Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports need to be submitted from a NABL/UL

accredited lab to verify above parameters.

SITC of decorative wall bracket having canopy arm chrome lamp cup with E27 lamp holder and LED bulb.

Dimension:L180XW120XH300mm ±2mm.Wipro cat No.: LM91/LT/Regent

SITC of Aluminium LED (Wall Highlighter) - 12W Modern Black Finish Wall Sconce Light for bedside indirect

lighting complete in all respect

Contractor 58 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULEOF QUANTITIES: LIFT

DSR- Quant All

S No Description of Item Unit Rate

2025 ity All Figure are Figure

E&M in Rs. are in

Supplying, Installation, Testing & Commissioning of following capacity passenger Machine room less (MRL) lift

with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003,

BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised

Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift

1 21.1.1 shaft as per detailed specifications enclosed and as under including all other equipment and accessories

complete as required:- (i) Speed-1 MPS (ii) Floors-5 (G+4) (iii) Travel -17 Meters (approx.) (iv) Stops & opening-

5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device

(ARD) complete with dry maintenance free batteries as required. vii) Operation:Microprocessor based single

automatic push button/simplex selective collective/duplex collective selective with/without attendant

(viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof

(Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect

throw) and LED fitting.(x) The car flooring should be smooth and antiskid as approved by engineer-in-charge.

(xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof

(Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not

less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii)Voice

announcement system in the car to announce the position of the elevator in the hoist way as the car passes or

stops at floor served by the elevator.

(xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2

hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In

Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift

car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and

HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery

backup for fan and light fitting for 1 hour, pit ladder.(xv) The lift doors shall have a vision panel to enable

persons with hearing impairment to signal for help or assistance in the event of an emergency.(xvi) An

appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to

respond to the emergency requirements of person with hearing impairment or deafness.(xvii) In case of failure

of ARD or other electronic devices, a provision of manual rescue be provided

Contractor 59 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULEOF QUANTITIES: BIO GAS ,INCINERATOR

Refer DSR- DSR NON-DSR

S No 2023/DSR Description of Item Unit Qty Rate All Figure are All Figure are

Supply installation testing commissioning of Solid waste incinerator with 10-00"

chimney(15-30kg per hr) high temperatire brick lined in burning chamber(I.S8 brick

kined chamber) size outer dimensions of 24" dia x 48" height with 6" legs etc

complete as per specifications and direction of Engineer Incharge complete.

Supply installation testing commissioning of Biogas unit of capacity 120L of having

2 MR 45kg of soild waste+55 liters of water and gas production of 6-7 hrs aproximately as nos 1 ₹3,67,500.00 ₹3,67,500

per specifications and direction of Engineer Incharge complete.

TOTAL ₹5,56,300

Contractor 60 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

SCHEDULEOF QUANTITIES: EV CHARGER

Refer DSR NON-DSR

DSR- Description of Item Unit Rate All Figure are in All Figure are

Light EV DC Charger (Mode 4) Power Level 1: Up to 7 kW, Input power supply: 1phase 230 +10%

Volt/3phase 415 Volt, Frequency: 50 Hz +/-5%, output supply: 12/24 Volt DC. Operational

temperature range : -25 to 55 0C (outdoor), -5 to 55 0C (Indoor), RH upto 95%, Charging Device as

per IS-17017-25, EV-EVSE Communication:IS-17017-25, one Charge Point Plug/ Socket as per IS-

60309 and IS-17017-2, Vehicle Inlet/ Connector As per EV manufacturer, suitable for 2 Wheelers and

4 wheelers. Indoor use: at least IP42; Outdoor use: at least IP54. Mechanical Strength :protection of

the external enclosure against mechanical impact shall be IK08 according to IEC 62262.O/L,S/C

protection. Insulation Resistance > 1 M Ω. Cable Length: 7.5 m. RCD having a rated residual

operating current not exceeding 30 mA; Separate RCD for multiple outputs. Telecommunication port

of the EV supply equipment according to IS 13252 (Part 1) : 2010. OCPP(Open charge point protocol)

1.6J upgradable to ocpp 2.0. Device Should follow 17017 series of IS codes in general and the

installation of the system shall comply with relevant IS Codes.

Contractor 61 NBCC

Digitally signed by DEEPAK

Tender for Appointment of Contractor for Construction of Residential Apartments for Canara Bank at Punkunnam Thrissur Kerala

BILL OF QUANTITIES: FIRE SYSTEMS

DSR 2025/ DSR NON DSR

S No Description of Item Qty Unit Rate

MR ITEMS All Figures are All Figures are in

1.00 27.4 WET RISER

(a) Supplying, installation, testing and commissioning of electric driven terrace pump

conforming to IS 12469: 2019 suitable for automatic operation and consisting of following,

complete in all respects, as required: (Terrace Pump)

(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal as required.

(c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415

volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot

mounted type with Class- 'F' insulation, conforming to IS-12615: 2018.

(d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as

(e) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to

IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers,

2.00 27.7 nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support

frame and painting with two or more coats of synthetic enamel paint of required shade

complete as required :

providing,fixing,testing&commissioning of 15mm dia quartzoid bulb tiles sprinklers of rating

68 degree with required accessories

27.21.1 pendent sprinkler 20.00 each ₹599.00 ₹11,980

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all

accessories as per manufacturer's specifications.

1.0 CO2 gas nozzle type - 9 Litre capacity (IS:15683). 6.00 each ₹11,750.00 ₹70,500

2.0 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). 6.00 each ₹5,250.00 ₹31,500

Contractor 62 NBCC

Digitally signed by DEEPAK