Renovation of Forest Rest House, Jhuni at Parbati HE Project Stage-II(Package No. C-703-A)

Amount

Part-I Civil Items

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand).

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand).

Random rubble masonry with hard stone in Superstructure above plinth level and upto floor five level including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6(1 cement: 6 coarse sand).

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 course sand)joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, granite of any colour and shade. Area of slab upto 0.50sqm.

Providing wood work in frames of doors, windows, clearstory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(hold fast lugs or dash fastener shall be paid for separately) kiln seasoned and chemically treated hollock wood.

Providing wood work in frames of false ceiling partitions etc. sawn and fixed in position with necessary stainless steel screws etc. kiln seasoned and chemically treated hollock wood.

Providing and fixing ISI marked flush door shutters confirming to IS:2202(Part 1)decorative type, core of block board construction with frame of Ist class hard wood and well matched teak 3 ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 35mm thick including ISI marked stainless steel butt hinges with necessary screws.

Providing and fixing 18mm thick,150mm wide pelmet of coir veneer board ISI marked IC:14842, including top cover of 6mm coir veneer board, nickel plated MS pipe 20mm dia(Heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm MS flat 10cm long fixed to pelmet with hollock wood cleats of size 100mmx40mmx40mm on both linner side of pelmet and rawl plugs 75mm long etc. all complete.

Extra for using veneered particle board confirming to IS3097 grade1,in item of pelment 18mm thick 150mm wide. Particle board with decorative veneering on both sides.

Providing & fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 300x16mm.

Providing & fixing ISI marked oxidized M.S. handles confirming to IS-4992 with necessary screws etc. complete: 100mm.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete.

Providing and fixing aluminum die cast body tabular type universal hydraulic door closer (having brand logo with ISI IS:3564 embossed on the body, door weight up to 35kg. and door width up to 700mm,with necessary screws etc. complete.

Providing & fixing aluminum tower bolts, ISI marked, anodized(Anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (i) 200x10mm

Providing & fixing aluminum tower bolts, ISI marked, anodized(Anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (ii) 100x10mm

Providing & fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5mm and average with aperture 1.4mm in both directions for doors, windows and clerestory windows with necessary screws:35mm thick shutters, second class teak wood.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.5mm all complete with 2nd class teak wood beading 62x19mm.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m².

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m².

Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately 12 mm thick.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand).

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Applying a coat of mordant solution on G.S. sheet a solution of 38 gms of copper acetate.

Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats).

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

French spirit polishing : Two or more coats on new works including a coat of wood filler.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats).

French spirit polishing : One or more coats on old work.

Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead .

Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 square centimeters and above.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters’ lead. For thickness of tiles 10 mm to 25 mm.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S.Sheet.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liter low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe of 32 mm dia.

Providing and fixing 600x400 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

P/F C.P. brass toilet paper holder.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings withone step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge .15 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 40 mm nominal outer dia Pipes

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet of 150 mm diameter.

Providing and placing on terrace(at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length.

Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer- in-charge (The rate is inclusive of all materials & labours involved except scaffolding).

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications:: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications:: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

Part-II Electrical Items

Wiring for light/fan point/exaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated, Copper Conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet , suitable size MS box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required . Group-A Points.

Wiring for light/power plug with 2X4 Sq.mm FRLS PVC insulated, Copper Conductor, single core cable in surface/recessed medium class PVC conduit along-with 1 no. 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit /Sub main wiring along with earth wire with following size of FRLS PVC insulated Copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. ( i)2x1.5sq.mm.+ 1x1.5 Sq mm earth wire

PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (i)2 x 6 sq. mm

Supplying & fixing of following piano type switch/socket on the existing switchbox/ cover including connections etc. as required: 15/16 amp Switch.

Supplying & fixing of following piano type switch/socket on the existing switchbox/ cover including connections etc. as required: 6 pin 15/16 amp Socket outlet.

Supplying & fixing of following piano type switch/socket on the existing switchbox/ cover including connections etc. as required: 5/6 amp Switch.

Supplying & fixing of following piano type switch/socket on the existing switchbox/ cover including connections etc. as required : 3 pin 5/6 amp socket outlet.

Supplying & fixing metal box of following size( nominal size) on Surface or in recessed with suitable size of Phenolic laminated sheet cover in front including painting etc. as required.: 180mmx 100mm x 60 mm deep metal box.

Supplying and fixing of 5amp to 32 amp rating,240V "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: 10 Amps.

Supplying and fixing of 5amp to 32 amp rating,240V "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.:16 Amps.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) 40 Amp.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator (i) 16 way, double door.

Supplying and fixing call bell/buzzer suitable for Single phase, 230V complete as required.

Supplying and fixing 3 pin 5A ceiling rose on the existing junction box/wooden block including connection as required.

Supplying and fixing PVC batton/angle holder including connection etc.as required

Earthing with GI Earth Plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate and having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Supplying and laying 25 mm x 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50 mm.

Supply & Installation of 4 feet complete Tube light : Supply of 4 feet complete tube light fitting including all accessories , LED type (18 Watt).

Supply & Installation of 4 feet complete Tube light : Installation, testing and commissioning of prewired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply & Installation of Geyser 25 liter (Glassline inner tank).

Supply & installation of Exhaust Fan 300 mm sweep :Supply of exhaust fan 300 mm sweep.

Supply & installation of Exhaust Fan 300 mm sweep : Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supply & installation of Ceiling Fan 1200 mm : Supply of ceiling fan 1200 mm.

Supply & installation of Ceiling Fan 1200 mm: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Northpeak Builders

M/S Maansuiya Enterprises Private Limited