REPLACEMENT OF WALL PANNELING IN DIG OFFICE AND CONFERENCE ROOM OF ADMN BLDG P-15 AND PROVISION OF TRAINING SHED NEAR PARADE GROUND AND REPLACEMENT OF MAIN GATE WITH GRANITE CLADDING AT DHQ 3 NEW MANGALORE AND PROVISION OF GEYSER IN NAVIKS MARRIED AC

Amount

SCH A PART-I [REPLACEMENT OF WALL PANNELING IN DIG OFFICE AND CONFERENCE ROOM OF ADMN BLDG P-15] M & L Plain Commercial Plywood 12mm thick, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M & L 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M & L framed timber Second class hard-wood in scantlings of clean swan complete all as specified and directed.

M & L french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M & L 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh filming Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.50mm dia, 40 mm long including dismantling the old unserviceable one complete all as specified and directed.

M & L Wire netting of galvanised steel wire, 1.40mm dia and Size of mesh in 12mm fixed with tinned tacks of wire staples complete all as specified and directed.

M & L Preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coats of Plastic emulsion paint on wall complete all as specified and directed.

S & F 25 micron solar control film, reflective type sticked to glass pans as per instructions of manufacturer on window glass panes including all material complete all as specified and directed

S & F in repairs 32mm dia Harrison rails,stainless steel, fancy type, with fixing brackets, stops, rollers etc complete all as specified and directed

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S & F Stainless steel lock without cut out(only key) for 12mm thick glass to glass door lock complete all as specified and directed.

S & F in repairs 12mm toughened glass in squares exceeding 0.5 sqm in each pane including rubber neoprene packing complete all as specified and directed. [Note: Aluminium frame shall be measured and paid separately ]

S & F in repairs stainless steel handle of 200mm size fixed on glass panel complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. [Note:- Minimum thickness of powder coating 50 micron]

S & F powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised, aluminium fittings such as pegs stays.150mm long(1 Nos) hinges type B-21,100 mm long (2 Nos), suitable handle (1 Nos)etc. complete all as specified and directed

S & F ordinary sheet glass, 4mm thick and glazing with glazing clips to Aluminium frame, exc 0.5 Sqm in each pane complete all as specified and directed.

S & F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed

S & F Powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

Taking down and re-fixing of shutters in same opening but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each re-fixing in same opening complete all as specified and directed.

S & F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed

M & L preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of Oil emulsion distemper complete all as specified and directed

M & L preparing old treated wooden surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed

M & L light shade & Double charged Virified Ceramic tiles of 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors , etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 including dismantling floor, hearth or wall tiling including dismantling cement mortar bedding (but not backing) complete all as specified and directed.

All as per Item No 25.00 here-in- before but as in skirting over 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed.

S & F Glazed ceramic tiles in vertical surface 450X350X7mm thick or 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing plaster in cement mortar 1:4 including dismantling floor, hearth or wall tiling including dismantling cement mortar bedding (but not backing) complete all as specifed and directed. [Total Quantity = 24.00 (Sch A Part-I) + 50.00 (Sch A Part-IV) = 74.00 Sqm]

Taking down electric switch board and re-fixing on same position complete all as specifed and directed

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosole oil complete all as specifed and directed

SCH A PART- II [PROVISION OF TRAINING SHED NEAR PARADE GROUND] Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out and removing surplus soil to a distance n exc 50m and making good surface complete all as specifed and directed [Note:- Returning filling/ fixing of steel pole in post hole will be done in concrete and shall be measured and paid under Item No. 32.00]

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M & L Plain Cement Concrete Type B2 1:2:4 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specifed and directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-2014(Reaffirmed year 2019) grade St.-240, complete all as specified and directed

S & F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.

S & F Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to bottom of GI pipe conforming Fe-410W complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces of any description, not otherwise described over 10cm width or girth after preparation complete all as specified and directed. [Total Quantity = 150.00 (Sch A Part-II) + 80.00 (Sch A Part-III) = 230.00 Sqm]

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M & L 100mm thick Plain Cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

Excavation in trenches width not exceeding 1.5 mtr and depth not exceeding 1.5 mtr for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in soft/disintegrated rock complete all as specified and directed.

M & L Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregates as in foundation /mass concrete for wall and post struts complete all as specified and directed.

M & L dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement mortar 1:6 complete all as specified and directed. [Total Quantity = 5.00 (Sch A Part-II) + 3.00 (Sch A Part-III) = 8.00 Cum]

M & L Rendering 15mm thick in Cement mortar 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified and directed. [Total Quantity = 99.00 (Sch A Part-II) + 60.00 (Sch A Part-III) = 159.00 Sqm]

M & L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed. [Total Quantity = 99.00 (Sch A Part-II) + 60.00 (Sch A Part-III) = 159.00 Sqm]

M & L returing filling in including spreading levelling watering in layers n.exc 25 cm thickness complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S & F RCC pre cast decorative Bench with back and arm rest of 3 seater of minimum 1.80 m length arrangment and all parts are joined together with galvanised nuts & bolts of suitable size, bench tops and back planks are treated with special anti corrosive, water proof coating and surface glossy and components are manufactured by using M-30 grade of concrete for long use and to prevent damage during handling complete all as specified and directed.

M & L Reinforced cement concrete M 30 (nominal mix) in using type B1 (using 20mm graded stone aggregate) as in slabs supported on walls beams and columns in floors, roofs, landings, balconies canopies, deck sabs and in shelves and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs curved such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars 5mm dia and over up to and including 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spaces and binders complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed [Total Quantity = 25.00 (Sch A Part-II) + 75.00 (Sch A Part-III) = 100.00 RM]

SCH A PART- III [REPLACEMENT OF MAIN GATE WITH GRANITE CLADDING AT DHQ 3 NEW MANGALORE] Note: - Rounding of edges of stone slab shall be measured and paid under Item No. 53.00] M & L 20mm thick granite (of any type) work (table rubbed and polished) in for wall linning (Veneering to wall) 12mm thickness cement mortar (1:3) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including taking down / demolition of old unserviceable stone tiles/slab bedder and pointed in cement mortar complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

Supply only Integral water proofing compound complete all as specified and directed

S & F Rolled mild steel Joist, channel, angle, or tee sections fixed independently, as in `Y' section/swan neck etc without connecting plates, etc.(cut to ordinary lengths i.e within 20mm of the length indicated) grade Fe-410(Gde E-250) complete all as specified and directed

M & L & Fixing with using of scafolding 304 stainless steel titanium gold raising letters and round emblem of approximate size of words 25cm in length, 30mm width and 20mm depth of Coast guard unit including all materials complete all as specified and directed [Note: Size and shape of letters may be changed at the time of execution as per direction of Engineer in charge. Hence contractor may be requested to visit the site regarding the size of letters before quoting the bid and no extra cost shall be paid after execution for variation of size]

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

S & F rolled mild steel in Framed work Fe-410-W(Gde E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other overing, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S & F mild steel work in Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade 165 complete all as specified and directed

M & L Providing Plain Cement Concrete type B1-1:2:4(using 20mm graded stone aggregate) in height, coping, kneelers, apex stones, bed plates, including weathering, slightly, rounded or chamfered angles and throating complete all as specified and directed

Supplying & Laying of 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc complete all as specified and directed

M & L 100mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base etc complete all as specified and directed

M & L sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

SCH A PART- IV [PROVISION OF GEYSER IN NAVIKS MARRIED ACCOMMODATION AT CGRA KANKANADY MANGALORE] S & F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes (Hot & Cold) etc complete all as specified and directed.

S & F Modular MCB SP, 16 Amp, 'C' curve, 10kA, 240 V with 16A, 3 pin modular Socket and including plastic enclosure as per manufacturer instruction fixed on wall surface complete all as specified and directed.

Sub main wiring with two single core 2.5 Sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade ISI marked conforming to IS-694 and including ISI marked of suitable size and accessories including 2.5 sqmm copper conductor cable FRLSH as earth wire complete all as specified and directed. Note:- (a) Two runs of cable with one run of earth wire including PVC casing caping & accessories shall be measured as one length. (b) Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. (c) Earth wire shall run inside the casing and caping.

Cutting existing steel tubing of 15/20 mm bore for alteration or additions (Each cut measured), screwing existing steel tubing for alterations or additions or lengthening screw on pipe to form connector including new GI Tee 20x20x15mm for branch connection complete all as specified and directed.

Supplying and laying of CPVC pipes outer dia 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F bib taps cast copper alloy chromium plated, screwed down with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and directed.

S & F stop valves fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and of size 15 mm bore complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 20cm girth in Bricks/ concrete/ stone block wall complete all as specifed and directed. Note:- (a) Abstract for Bill of quantities shall be submitted separately for each part for payment. Please note that financial effect of more than 10.0 Lakhs of any part of this BOQ shall be permitted by this office (b) The completion amount of each part shall not exceed Rs 10.00 Lakhs at any cost. (c) Clearly quantity of items of various part is indicated under respective items.

S M Shetty