Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC BALTIKURI INDUSTRIAL ESTATE PLOT NO A 01 DASNAGAR HOWRAH 711113 | HOWRAH | HOWRAH | WEST BENGAL | 711113 | L1 | Accepted-AOC Accepted. | |
| 2 | L2₹29.0 L+₹1.4 L (4.92%)Rejected-Finance | L2 | Rejected-Finance Higher Bid Value. | |
| 3 | L3₹32.4 L+₹4.7 L (17.0%)Rejected-Finance 103 1A RAJA DINENDRA STREET KOLKATA 700006 | KOLKATA | KOLKATA | WEST BENGAL | 700006 | L3 | Rejected-Finance Higher Bid Value. | |
| 4 | L4₹33.6 L+₹5.9 L (21.3%)Rejected-Finance | L4 | Rejected-Finance Higher Bid Value. |
Tender Value
Refer Docs
EMD Value
₹58,730
Closing Date
15 Dec 2021, 2:00 pmClosed
Ex. Engineer, Jalpaiguri Electrical Division PWD.
Office of the Executive Engineer, PWD, Jalpaiguri Electrical Division, Purta Bhavan, Hakimpara, PO and District Jalpaiguri, PIN 753101.
Urgent Internal Electrical Installation Work for setting up of Hybrid CCU at Mal Sub Division Hospital, Jalpaiguri SITC of Air-Conditioning System and Negative Pressure arrangement.
2021_WBPWD_353657_1
WBPWD/EE/JED/NIQ 30e/Q of 2021-22.
Open Tender
A/C ORG
Item Rate
30 days
Hybrid CCU, Mal Sub Division Hospital
Please refer Tender documents.
2 documents required · 2 mandatory
₹58,730
11 Jan 2022
30 Nov 2021
17 Dec 2021
30 Nov 2021
15 Dec 2021
30 Nov 2021
Amount
Supply of Ceiling Mounted Ductable DX type Air Conditioning Unit with 198000 btu/hr Cooling capacity,6600 CFM Air Flow, with 3/2 nos, Scroll compressor, 400V/3 PH/50 Hz Microprocessor based Controler of 16.5 TR nominal capacity with R-410A/R407C Refrigerant. (Make-Hitachi/O-General /Carrier/Voltas/Daikin).
Supply of Ceiling Mounted Ductable DX type Air Conditioning Unit with 132000 btu/hr Cooling capacity, 4400 CFM Air Flow, with 2 Nos.Scroll compressor, 400V/3 PH/50 Hz Microprocessor based Controler of 11.0 TR nominal capacity with R-410A/R407C Refrigerant. (Make-Hitachi/O-General /Carrier/Voltas/Daikin).
Supply of Ceiling Mounted Ductable DX type Air Conditioning Unit with 102000 btu/hr Cooling capacity, 3400 CFM Air Flow, with 2 Nos.Scroll compressor, 400V/3 PH/50 Hz Microprocessor based Controler of 8.5 TR nominal capacity with R-410A/R407C Refrigerant. (Make-Hitachi/O-General /Carrier/Voltas/Daikin).
SITC of Exhaust System
SITC of Single Skin Centrifugal Cabinet Type Fan complete with DIDW- forward/Back curved belt/direct driven centrifugal blower Rotaion of fan 1435 RPM, Epoxy/ galvanized steel sheet cabinet with service access doors, Inlet & outlet drilled flanges 2.7 KW, 4 pole, IE - 2, IP -55 Standard 1Ph/220V/50 hz Motor,(Make: ABB/ Ostberge) with Fixed base, common base frame with spring isolators,Flange at inlet and outlet are provided to facilitate duct connection necessary hanging/supporting members, water prof Dimer Panel for Fan's Speed control etc. Sound level-65 dba. Capacity 70mm/wc Static pressure, 2300 to 2500 CFM,(Make- Ostberge/ Marathon/ Elta /Kruger)(2 Nos.Working & 2 Nos. Stand by)
SITC of 10 Micron Pre Filter with Frame, it will be fitted on Centrifugal Exhust fan, TFA Units & on the Fresh air Damper (Make: Spectrum/ AFI/System Air)
SITC of MERV-17 0.3 Micron Hefa Filter,it will be fitted on Centrifugal Exhust fan.(Make: Spectrum/ AFI/System Air)
Supply and fixing of UVC EMIITTER for the above fan's for prevention of fungus , The minimum UV intensity in the coils shall be 700-800 UW-SEC/CM2. The unit shall be UL.Listed (UL-1995)
Installation, Testing & Commissioning of the above Air Conditioning systems with all necessary accessiores for hanging Indoor & Outdoor Units
For 16.5 TR Ductable Units.
For 11.0 TR Ductable Units.
For 8.5 TR Ductable Units.
Copper refrigeration pipe line for liquid and suction line with hard drawn copper piping with supports & brackets
Cu. Pipes Suction line dia 15.88 mm.
Cu.HD Pipes Suction line dia 22.2 mm with 13mm thick nitrile insulation.
Supply and fixing of necessary electrical arrangements of Air Conditioning Units, PVC insulated FRLS grade Copper cable for connection betweeen indoor and outdoor units, 1.1 KV grade.
3 core x 1.5 mm² (Make- Polycab/ Haavells/Gloster/Bonton/RR).
3 core x 2.5 mm² (Make- Polycab/ Haavells/Gloster/Bonton/RR).
Supply & fixing of dia UPVC drain pipes with all necessary hanging arrangements & 9mm Heat Retardant Thermal insulutaion.
Dia 32mm
Dia 25mm
SITC of Site Fabricated G.I Sheet Metal Square Air Duct complete with Angle, Fastner, supports, dampers etc. as per specifications & site requirement.
For 24 SWG
For 22 SWG
Supply and fixing Heat Retardant closed cell Class'O' 9mm thk Nitrile Rubber insulation inside Supply Air duct.
Supply and fixing Heat Retardant closed cell Class'O' 9mm thk Nitrile Rubber insulation with AI Foil Faced Outside Supply Air duct.
Supply & Fixing of Liner type AI Powder Coated Continuous Grill with VCD for Supply Air.
Supply & Fixing of Liner type AI Powder Coated Continuous Grill without VCD for Return Air.
Supply and Fixing of Motorized Volume Control Damper.
Supply and Fixing of Motorized Non-Return Type Flow Control Damper .
Supply & Fixing of Fusiable Link Fire Damper,Galvanized Steel Sheet with 125 GSM Zink Coated, Certified by CBRI ( U-555, 1995),with minimum fire rating not less than 120 min, must be Fusiable Link Spring with 74°C Temerature rating Ul Listed
Providing and fixing fire retardant nonporous double layer flexible connection between IDU, Exhaust, TFA units and duct.
SITC of heavy duty anti vibrational pad to protect the system from any kind of unwanted vibration.
Supply & Fixing of Fresh Air Damper with Bird Screen as per direction of E.I.C (Make:Primier/Air Kolkata/Air Primier/AFI).
Supplying, fabrication & fixing 03 Nos. M.S. Angle/M.S C chanel of size (75 mm x 75 mmx6mm) for placing the outdoor unit of ductable split AC incl. drilling 05 nos holes in each Angle including cutting holes into the wall & grouting the same (1:1 ½ :3) etc for Air Conditioning Units. FOR 16.5 / 11.0 TON
Supplying, fabrication & fixing 03 Nos. M.S. Angle/M.S C chanel of size (75 mm x 75 mmx6mm) for placing the outdoor unit of ductable split AC incl. drilling 05 nos holes in each Angle including cutting holes into the wall & grouting the same (1:1 ½ :3) etc for Air Conditioning Units FOR 8.5 TON
Supplying, fabrication & fixing 4 Nos. M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making Base Frame table type for installation of Exhaust Cabinet incl. drilling 2 nos holes in each channel. fabricated with 4 Nos.Baricated the same for maintenance horizontal angle of 50 mm x 50 mm x 6 mm Inscl Platform as per direction of E.I.C.. Area of Platform 9mtr x 1.8mtr for Placing the Exhaust Units including scaffolding charges.
Supply & Fixing of IDU & Duct Covered with 3mm thick ACP Board (Make:Aludecor/Protap Bond) Coplete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete as per direction of E.I.C.
Chrages for Trap door with ACP Board (Make:Aludecor/Protap Bond)Coplete with linkages, levers, fittings, supports, all accessories for IDU Maintenance make with ACP Board as per direction of E.I.C.
M/S INDRADEEP ENTERPRISE
S.R. REFRIGERATION AND APPLIANCES
SOUMYA ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .