REPAIR/ REPLACEMENT IN OUTDOOR TILES, PCC, HARDSTANDING NEAR STATION HEAD QUARTER AREA AT TRANSIT CAMP PALCHAN

Amount

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and directed by Engineer-in-Charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and directed by Engineer-in-Charge.

M&L for pre- polished granite slab of any tint as approved by the Engineer-in-Charge 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all asspecified and as directed by theEngineer-in-Charge.

M & L for chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and directed by Engineer-in-Charge.

Demolition of brick/stone/boulder/block masonry, built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,incld demolitions complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. (Make Acrocem/Snowcem and equivalent)

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F, Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., Fe 410 -W (GdeE- 250) quality-A, complete all as specified and directed by Engineer-in-Charge.

S & F, mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and directed by Engineer-in-Charge.

S&F, Pre-painted gaivatume aluminium sheet zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F, Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling board any of description complete all as specified and directed by Engineer-in-Charge.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in wall paneling complete all as specified and directed by Engineer-in-Charge.

M&L for Plain fillets,square,rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 3sq cm and n exc 6 sq cm of second class softwood complete all as specified and directed by Engineer-in-Charge.

M&L for Second class softwood timber framed and fixed, Clean sawn in scantling, complete all as specified and directed by Engineer-in-Charge.

Dismantling PVC sheet/ flooring including cleaning the surfaces complete all as specified and directed by Engr-in-Charge.

M&L for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floorscomplete all as specified and directed by Engr-in-Charge. Make :BAJAJ/Unitex Carpet/Responsive Industries Ltd.

S&F in repairs 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5sq.m in each pane including hacking out from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-Charge.

NATHU RAM AND SONS

M/S. Vyas Vatika Constructions co.

R. P. Suppliers and Construction Co.

Arsh Builder

S R AND CO

M/S SK Sharma & Co.

Rajesh Agencies