Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
7 Sept 2026, 5:00 pm
SP ADMIN CIF WB
307 GARIA MAIN ROAD KOLKATA -84.
PROCUREMENT OF TYRE,TUBES AND FLAPS FOR CIF, WB
2026_CIF_1039195_1
RE/CIF/MT/eNIT-2/26-27
Open Tender
Miscellaneous Goods
Item Wise
10 days
KOLKATA
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹10,000
KOLKATA
24 Aug 2026
24 Aug 2026
9 Sept 2026
24 Aug 2026
7 Sept 2026
24 Aug 2026
1 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 8.25 - 16 (FRONT) TYRE, TUBE & FLAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 2 | 8.25 – 17 (REAR) TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 3 | 7.50 – 16 (FRONT) TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 4 | 7.50 – 16 (REAR) TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 5 | 215-75 R /15 TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 6 | 215-75 R /15 TUBE LESS
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 7 | 2.75 – 17 (FRONT) TYRE, TUBE & FLAP LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 8 | 3.00 – 17 R (REAR) TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
| 9 | 2.75 – 18 TYRE, TUBE & FLAP
LAP
1) SCOPE OF SUPPLY OF BRAND NEW TYRES, TUBES & FLAPS (WHERE APPLICABLE) FOR DEPARTMENTAL VEHICLES OF THE FOLLOWING SIZES.
2) TECHNICAL REQUIREMENTS.
• TYRES SHALL BE BRAND NEW, UNUSED AND FREE FROM MANUFACTURING DEFECTS.
• TYRES SHALL CONFORM TO THE LATEST APPLICABLE BIS/IS STANDARDS.
• TUBES SHALL BE HEAVY – DUTY BUTYL RUBBER TUBES OF MATCHING SIZE.
• FLAPS SHALL BE HEAVY-DUTY BUTYL RUBBER FLAPS OF MATCHING SIZE.
• TUBE TYPE TYRES SHALL BE SUPPLIED COMPLETE WITH MATCHING TUBE & FLAP.
• TUBELESS TYRE SHALL BE SUPPLIED WITHOUT TUBE AND FLAP UNLESS SPECIFICALLY MENTIONED.
• TYRES SHALL BE SUITABLE FOR THE RESPECTIVE VEHICLE MANUFACTURERS RECOMMENDED APPLICATION.
• MANUFACTUIRING DATE SHALL NOT BE OLDER THAN 06 (SIX) MONTHS FROM THE DATE OF SUPPLY.
• WARRANTY: MINIMUM 24 MONTHS FROM THE DATE OF SUPPLY OR THE MANUFACTURERS STANDARD WARRANTY, WHICHEVER IS APPLICABLE.
• THE SUPPLIER SHALL REPLACE ANY TYRE FOUND DEFECTIVE DUE TO MANUFACTURING DEFECTS AT NO EXTRA COST. INSPECTION AND ACCEPTANCE SHALL BE CARRIED OUT BY THE CONSIGNEE.
• MRF, BRIDGESTONE & YOKOHAMA | - | Per Pc. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_2552316.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].