Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC JAVERI BUNGALOW AREA KAVERI HOTEL LINE NH PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.1 L+₹90,762.70 (2.38%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹39.7 L+₹1.5 L (4.01%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹40.1 L+₹2.0 L (5.13%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹40.5 L+₹2.3 L (6.12%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹77,000
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Manish Kumar, IDSE, Garrison Engineer
GE Navy Porbandar Tija Mile Porbandar
PROVISION OF OFFICERS TRANSIT AT INS SARDAR PATEL UNDER GE NAVY PORBANDAR
2023_MES_620719_1
9217/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Navy
₹77,000
Yes
31 Aug 2024
26 Sept 2023
20 Oct 2023
26 Sept 2023
18 Oct 2023
11 Oct 2023
27 Sept 2023 - 10 Oct 2023
Amount
Surface dressing n.exc. 15 cm deep in hard/dense soil including cutting of bushes, sapling etc. complete.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in hard/dense soil, complete all as direced by Engr-in-Charge.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in soft/disintegrated rocks, complete all as direced by Engr-in-Charge.
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete plinth beam .complete all as directed by Engr-in-Charge.
M&L for Treating the AntiTermite Treatment for bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area
M&L for Treating the AntiTermite Treatment for flooring at the rate of 7.5 litres of emulsion per square metre of surface area
M&L for Treating the AntiTermite Treatment for soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M&L for 75 mm thick PCC, type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.
M&L for RCC type M-30 (20 mm graded aggregate) as in foundations, plinth beams, bases for column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.
Returing, filling in, including spreading, levelling, watering and well reamming in layers not exc 25 cm complete all as directed by Engr-in-Charge.
Removing excavated material as not exc 50m and depositing where directed .
M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as directed by Engr-in-Charge.
M&L for form work to sides of columns, square, rectangular, complete all as directed by Engr-in-Charge.
M&L for formwork to chajjas,troughs and similar items including edgeson flat and finished surface.
M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.
Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
S&F Mild steel TMT bars 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
M&L for stone walling porbandar type block masonary in cm 1:6, brought up to courses, complete all as directed by Engr-in-Charge.
M&L for 20 mm thick External Plaster in CM 1:4 mixed with water proofing compound, finished even and smooth (without using extra cement).
M&L for 15 mm thick Internal plastering in CM 1:6 finished even & smooth without using extra cement and applying sagol finish complete.
M&L for Internal Plastering 5 mm thick to Ceiling in CM 1:3 complete
Supply only water proofing compound.
M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Polymeric membrane will be measured and paid separately)
M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyster fabric or weight not less 160 gms per sqm. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane.
M&L forMaterial & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete as specified and directed.
M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed
M & L for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash
M&L for Hard core, using broken stone or boulders of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.
M&L for PCC 100 mm thick, type C-2, 1:3:6 (40mm graded aggregate) as in sub-base, complete all as directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) area of each tile exceeding not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor or skirting including 10mm thick cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors or skirting including 10mm thick cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium sliding windows/ventilator, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as directed by Engr-in-charge.
S&F Plain solid, straight chowkats and frames of second class shard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 3097 (Part I), kiln seasoned and chemically pressure treated all as directed.
M&L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described over 10 cm width or grith and painting with 2 coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, Complete all as specified and directed.
S & F 200mm long mild steel barrel tower bolt of extruded section and fixed, Complete all as specified and directed.
S & F 150mm long mild steel handles cast type, Complete all as specified and directed.
S & F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded Complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified & directed by Engr-in-charge.
S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by Engr-in-charge.
S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm length complete all as specified & directed by Engr-in-charge.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified & directed by Engr-in-charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and as directed.
S&F Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified
S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square not exc 0.5 sq. m in each pane all as specified and as directed
S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed.
S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified.
S&F in 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
Supplying and laying of bore 25mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.
Supplying and laying of bore 20mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.
S&F (Angle Valve) 15mm bore size chromium plated fancy type complete all as specified.
S&F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius laid in trenches of nominal bore 75 mm complete all as specified and directed
S&F PVC (SWR) junction single, (Single T) equal or unequal of nominal bore 75mm complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia
M&L PVC (SWR) multifloor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed
M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement
S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I
S&F20mm ball valves high pressureof PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed min. wt 20mm-210gm Make "Paryag/polytuf"
S&F 25mm long handle CPVC ball valve for 25 mm bore pipe fixing in CPVC pipeline fixing with necessary fitting and solvent Complete all as specified and directed .(Make Prayag/Astral or equilant ) approved by Engr-in charge)
M&L for reinforced cement concrete (Type B1 1:2:4, 20mm graded stone aggregate) Slabs supported on walls,manhole covers beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade etc complete (with grey cement and pigment) over sand cushioning. Note: Sand shall be measured and paid saperately.
M&L 300 x 200 x 7/350x250x7mm mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in CM 1:4 finished even and rough complete all as specified by Engr-in-Charge. Note : Tiles approved by GE.
M&L for sand filling under floors or in foundations including watering and consolidation
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:4 as in floor and skirting complete all as specifeid
M&L Reinforced concrete pipes, class NP2, laid and jointed complete with collars of nominal dia 150mm, all as specified
M&L PCC 1:3:6 type C-2 for 150 mm dia pipe bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested, including filling complete all as specified and directed.
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, for 150mm dia complete all as specified and directed
S&F in repairs Vitreous China wash down water closet pan (European type) with P or S trap, snow white or white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat cover complete all as spd and directed by engineer in charge.
S&F in repairs min 10litres capacity PVC flushing tank, syphonic action type, high / low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, chain and pull and suitable sized brackets including taking down / dismantling old unserviceable flush tank (any type) and disposing off.
S & F in fancy type (Vitreous Ceramic ivory or snow white) pedestal patten hand wash basins with full pedestal of size 630x450mm (Cat Model No. CERA CORNET / CONCORD / CALIBRE) complete set to fixied wall with all necessary fittings with fixing arrangements and connecting to water pipe with existing water system etc including suitable pillar tap (CERA MODEL F1015101 or Equallent Suitable model & make approved by Engineer in Charge) complete all as specified and directed by Engineer in charge.
S & F in repair to 700X500 looking mirror fancy type 5mm thick woth double coat fpr protection and longevity grounded edges for safy and silver plating on the back for better refelction Complete all as spd and directed by Engineer in Charge.
S& F in repair to CP fancy type Toilet paper Holder with flap guard complete all as specified and directed by Engineer in charge.
S& F in repair to CP fancy type Soap Dish complete all as specified and directed by Engineer in charge.
S&F in repairs fancy type Chromium plated towel rail, 600mm long ( 24"), complete all as specified.
S & F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repair to ABS body Health faucet with wall hook and 1 metre SS braided rubber holes pipe.
S&F in repairs CP brass wall mixer for mixing hot & cold water with bend pipe for over head shower screwed down for CPVC and fixed as in repair complete all as spd.
S&F in repairs to15mm bore fancy type CP Stop cock or angle with wall flange comeple all as spd.
S&F in repairs to central hole CP Wash hand basin mixer with 450mm braded connection pipe for mixing hot & cold water screwed down for iron pipe and fixed.
S&F in repairs to Bib cock long nose with wall flange and aerator for CPVC pipe and fixed.
S&F in repairs to CP grating square min 150mm size Complete all as spd.
S & F in Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (long/big size) screwed for iron pipe and fixed for 25mm bore pipe (Minimum weight-455gms), fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
Material and labour point wiring with 1.5 sqmm (nominal cross section area) single core PVC insulated unsheathed cable of 1100 Volts grade (FRLS) multistrand with copper conductor drawn through and including non metallic, rigid PVC conduit of adequate size with all fittings and conduit accessories concealed in wall/ceiling/floor/roof etc. including 1.6 mm thick sunk mild steel terminal box with 3mm thick plastic laminated sheet top cover, cadmium plated iron screws for housing the switches, socket outlets including provision of 1.5 sqmm green in colour PVC insulated copper conductor single core multistrand (FRLS) for earth continuity conductor and connected to common earth dolly all as specified for the following:-
(a) One light point control by one switch
(b) One ceiling fan/exhaust fan control by one switch
Ditto all as per item No. 95.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps on the same board with other switches
Ditto all as per item No. 95.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps socket as independent board
Ditto all as per item No. 95.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor.
Ditto all as per item No. 95.00 above but for One bell/buzzer point controlled by one push button
S & F Modular switch 1 way 6A, 1 module all as specified and directed by EIC.
S & F modular socket, Socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC.
S & F Socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC.
S & F Modular switch 1 way 16A, 1 module all as specified and directed by EIC.
S & F Modular bell push 6A, 1 module all as specified and directed by EIC.
S & F Buzzer, Ding dong AC 230V Single pole all as specified and directed by EIC.
Supply and fix ceiling rose three terminal ll as specified and directed by EIC.
Supply and fixing Modular fan regulator120Watt, 2- module , AC 240 Volts complete.
Supply and fix ceiling fan 1200 mm sweep 230 V AC, 5 Star rated with brushless direct current motor (BLDC) complete including connecting up with 3 core cord flexible from ceiling rose to fan etc all as specified and directed by Engr-in-charge.
Supply and fix exhaust fans made of strudy engineering plastic complete with louvers shutter , voltage, 230 V, 50Hz RPM 1200, copper winding sweep 250 mm complete including connecting up with 3 core cord flexible from ceiling rose to exhaust fan etc. all as speified and directed by Engr-in-charge.
S & F of Wall mounted fan white in colour 300mm sweep 3/4 blades complete all as specified and as directed.
Supply and fixing LED light fitting 1x 20 Watt,220 V AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED light fitting mirror type 1x10 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Decorative wall light , gold finish fixture with white glass diffuser suitable for 7.5 Watt LED filament lamp E27 BASE including connecting up with three core flexible copper conductor cable of suitable size complete.Make Havells Cat Part No LHFOAKD2TZ1D060
S & F 4 MODULE LED FOOTLIGHT fittings , 240V White, Poly Carbonate, Fire Retardant,UV stabilized complete all as directed by Engr-In-Charge.
Supply and fixing LED street light fitting 35 Watt,230 V AC outdoor type with high pressure die aluminium housing and heat resistant complete with driver , lamp, with impact and corrosion resistanct including thermal management in multiple optics, including suitable size mounting bracket , clamps ,nut,bolts complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.
S&F Water heater storage type, electric,capacity 25 litres.BEE 5 star rated with rated power 230 V, 1 phase, 50 Hz AC, 2000 W fixing to wall with the help of heavy fastners Inner container Feroglas coated, Mounting vertical, Heating eleement Incoloy 800 glass coated, Temprature gauge, Temperature setting knob, water proof degree IP x 4, class of appliances Class-I, along with hot and cold water pipes of suitable lengths all as specified and as directed. Make : Havells 'PURO' or its equivalent model of makes specified in Appx 'B' here-in-before. Note : (a) Geyser to be fitted by company technician only. (b) Geyser fixing to be done only by heavy fastners. (c) Warranty card of every New Geyser will be submmited to the Engineer-in-Charge duly stamped.
S & F in replacement MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade ,Glazed door 415 Volts TPN with 4 way Double door
S & F in replacement MCCB TPN 63 Amps , 415Volts, 16 KA
S & F MCB SP 6-32 Amps 'C' Series complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR (part-I)
S& F XLPE insulated armoured and pvc sheated heavy duty electric cable size 3.5 core ,25 Sqmm cross sectional area with aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete Note- rate is inclusive of cable gland & cable lugs Make- Havells/FINOLEX/CCI
Supply & fix Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia along with necessary clamp duly painted with silver aluminuim paint nut bolt etc, including PVC bend of required size for cable entry at bottom of pole complete all as specified and directed.
S& F in replacement of laying of Double Walled Corrugated (DWC) HDPE pipe of size 50/38 mm outer/inner dia of conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge.
S& F LED Bollard light with soft 360 degree distribution with neceesary mounting foundation and connecting with flxible copper cable of suitable size complete all as directed by Engr-In Charge.
Supply & fix PVC insulated 3 core 1.5 sqmm multistranded Copper conductor as specified & directed.
Supply and fix PVC pipe 25 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories complete as specified & directed.
M & L for cutting existing GI water tubing of size 50/40 mm dia and fixing including necessary GI fittings such as bends, elbows, tees, reducer, unions etc of sutable size for inserting 25 mm dia GI tubing and making good the existing complete all as specified and directed by Engr-in-charge.
Supply and fixing GI water tubing medium grade 25mm dia bore laying in trenches complete including necessary all GI fittings such as bends, elbows, tees, reducer, unions etc of the following sizes
Supply and fixing GI water tubing medium grade 25mm dia bore fixed complete to walls or laid in floors including necessary all GI fittings such as bends, elbows, tees, reducer, unions etc of the following sizes
Supply & Fix gun metal gate valve 25 mm bore (ISI Marked ) with iron wheel head, screwed both ends for iron pipe for following sizes
Supply & fix pressure pump of power rating 1 HP, head 15 meter, Discharge 2500L/H -to 500 L/H including necessary fittings.
Supply, install, testing &commissioning hi wall split unit air conditioners inverter type indoor/outdoor complete including outdoor unit mounting stand, electric driven single phase, copper tube condensor coil, cordless remote control of capacity of 1.5 TR BEE 5 star rated complete all as specified and directed.
Supply and fix voltage stabilizer single phase 50 cycles AC supply designed for input voltage of 170 V to 250V and out put voltage stablised between 215V to 240V of capacity 4 KVA including necessary mounting arrngement complete all as specified & directed by Engr-In-Charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and directed.
Supply and fix PVC pipe 20 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories for drain out condensing water of split AC including cutting of floor/opening of hole in wall and making good after laying of pipe etc to match the existing surface complete.
J J ENTERPRISES
AADESH CONSTRUCTION
SANVI ASSOCIATES
Vastushilp Building Designer
Vijay Construction Co
JAY BHARAT METAL SUPPLIERS
Shree Ashapura Construction Co
Bharat Enterprise
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .