Loading…
Loading…
Tender Value
₹28.4 L
EMD Value
₹28,440
Closing Date
1 Jul 2026, 6:00 pm4d left
Similar tender results from the same govt authority in the past 3 years.
CHIEF OFFICER THARA NAGARPALIKA
Supply & Installation Of Pumping Machinery & Renovation Of MH And House Connection As Per Various Location Chart At, Thara 15th Finance Commission Grant (Second Attempt)
316005
Thara/NP/June/2026/01
Open
Civil - All
Banaskantha
1 document required · 1 mandatory
₹1,500
Chief Officer, Thara Nagarpalika
₹28,440
20 Jun 2026
20 Jun 2026
20 Jun 2026
1 Jul 2026
20 Jun 2026
NAME OF WORK :-SUPPLY & INSTALLATION OF PUMPING MACHINARY & RENOVATION OF MH
AND HOUSE CONNECTION AS PER VARIOUS LOCATION CHART AT, THARA (SECOND
TOTAL AMOUNT PUT TO TENDER
TOTAL AMOUNT PUT TO TENDER
PERCENTAGE RATE TENDER
Sr.No. Schedule Amount
1 Schedule - "B"- 1
2 Schedule - "B"- 2
Total Amount Rs.
Total Amount Rs.
I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage
(should be writen in figures and words) of the Estimated rates mentioned above amount of my / our
Tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. 28,44,054.00 Put to Tender Rs.
Add % Rs. Deduct %Rs.
Total Rs. Total Rs.
(In Words (In Words
Stamp with Signature of Contractor
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
THARA NAGARPALIKA - THARA
DIST. : BANASKANTHA
SCHEME : 15th FINANCE COMMISSION GRANT
NAME OF WORK: AUGMENTATION THARA DRAINAGE
Item Qty Rate Unit Amount (Rs.)
Mechanical works
Non Clog Sub C/F pump :Supply, installation, testing & commissioning
of sewage submersible, non clog type suitable for working on three
phase, 50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM synchronous
speed with 3 core flat copper cable from pump to starter panel with
cable end terminations, all supports, clamps, pipe fittings along with 2 304124.00 Nos.
mechanical seal, bearing bush, strainer etc. complete set & following
M.O.C: Casing: CI, Impeller: SS CF8M, Wearing ring & Bearing bush:
Bronze, TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS
strainer & MS motor body. 15 kw
LV Panel (ATS Starter):
SITC of Auto transformer starter suitable for local & remote pump
control application consisting of Auto Transformer (vacuum
impregnated, air cooled having three (3) tappings at 50%, 65% and
80%), incomer MCCB / MPCB, overload relay and contactors as per 2 33403.00 No
Type II coordination including digital MFM with RS 485 communication
port, analogue type ammeter with selector switch, run hour meter,
required protective relays & control accessories. Rating: - 30 Kw
LV Panel (S/D Starter):
SITC of Star Delta starter suitable for local & remote pump control
application consisting of MPCB, overload relay and contactors as per
Type II coordination including digital voltmeter, analogue ammeter with
selector switch, run hour meter, required protective relays & control
accessories. Rating: - 15 Kw
LV Panel (S/D Starter):
SITC of Star Delta starter suitable for local & remote pump control
application consisting of MPCB, overload relay and contactors as per
Type II coordination including digital voltmeter, analogue ammeter with
selector switch, run hour meter, required protective relays & control
accessories. Rating: - 11 Kw
Supplying, Installation, Testing And Commissioning of D. I. K-9 grade
D/F pipes (total length 5 meter) for following nominal bore diameter with
internal cement mortar lining including all taxes, insurance,
transportation, freight charges, octroi, inspection charges, loading, 60 3492.00 mtr
unloading, conveyance to departmental stores, stacking etc. complete.
(IS - 8329 / 2000) 150 mm Dia (Delivery line & Header Line)
Labour Charges for lowering, laying, Fixing with fabrication various size
section of MS such as joints, channels, angles, Iron Rails,
ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc
Complete with two coats of red oxide and two coats of approved colour
shade of epoxy paint as per relevant IS and as per specification.
Sluice Valve: Installation, Testing And Commissioning of ISI mark CI
D/F Sluice Valves as per IS:14846 (Latest Edition) of following class and
diameter including all taxes, insurance, transportation, freight charges,
octroi, inspection charges, loading, unloading, conveyance to 12 6433.00 No
departmental stores, stacking etc. complete. (PN 1.0 )
150 mm dia (For Delivery Line & Header Line)
Item Qty Rate Unit Amount (Rs.)
Dual Plate Check Valve (Reflex valve)
Installation, Testing And Commissioning of ISI mark CI D/F Non return
Valves as per API-594 (Latest Edition) of following class and diameter
including all taxes, insurance, transportation, freight charges, octroi, 8 8612.00 No
inspection charges, loading, unloading, conveyance to departmental
stores, stacking etc. complete. (PN 1.0 )
150 mm dia (For Delivery Line)
Pressure Gauge: Installation, Testing, Commissioning of Diaphragm
sealed Pressure Gauge, ±1% accuracy, Direct bottom 1/2" NPT (M)
process connection, IP 67, Glycerine filled, SS304 Case with Bayonet
Type Bezel, SS316 L Diaphragm, SS316 Bottom Housing Material, SS
316 Movement material, Aluminium dial with black graduation on white 12 3012.00 No
background, Micro Zero adjustable pointer, neoprene gasket, Blow out
disc, shatter proof glass, SS tag plate etc as per IS 3624. 150 mm dial
size 0 to 10 kg/cm2 (For Discharge + Common Header)
Supply at Site, Installation, Testing & Commissioning of lying
reinforced cement concrete : Providing and casting in situ C.C. in
grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix
design or as per Table 9 of IS456 2000 in masses by weigh batching )
using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work,
including scaffolding centering, form work, needle vibrated 7 4732.00 cmt
consolidation, curing comp. up to 6 meter depth or height (excluding
cost of reinforcement and neat finishing) with centering and
shuttering/deshuttering etc. comp. for structure for other than water
Dismantaling & removal / shifitng in existing Drainage like All Pump-
Motor set, Valves, Pipes & fittings, sluice gate , Tee, LT Panels, wiring,
cables, lighting, earthing system,etc. any other equipments not listed
here in but installed in existing drainage & required to be dismantled / 1 140000.00 Lot
shifting and all items are all Loading, Transportation, Unloading &
Stacking them at Store or location as per instruction of Engineer-In-
Charge. (Including 9 Nos. Pumps)
Labour Charges of draiange pumping empty And clear garbage,
Installation of Pipe, Pump, Electric Panel , Electric Work Joint in
drainage running pumping station. (3 Nos Pumping station Cleaning And 1 85000.00 Lot
6 Nos pump Install)
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
THARA NAGARPALIKA - THARA
DIST. : BANASKANTHA
SCHEME : 15th FINANCE COMMISSION GRANT
NAME OF WORK :- RENOVATION OF MH AND HOUSE CONNECTION
Item Description Qty. Rate Per Amount
RCC Precast MH Frame and Cover Manufacture, Supply
& Delivery at store or at site of work precast RCC M200
Frame & Cover suitable to drainage MH and as per type
design & Drawing including cost of reinforcement MS
Angle or flat, curing mold work incl.
1.2 Cover (MH) 160 1184.73 No.
1.3 Frame (House Connection) 160 821.13 No.
1.4 Cover (House Connection) 160 929.20 No.
Providing and constructing Sewer manholes, scraper
manholes and unit house connection chamber, as
masonry in C. M, 1:5 and inside and outside 20mm thick
plastering i C. M. 1:3 necessary 100 mm coping with
reinforcement in R.C.C.M. per te rype desig n brck
foxong C.1. steps and fixing manhole frame and covers
(But excluding Supply of manhole frame and covers) over
manholes and nouse connection chambers and fixing 20 12300.79 No.
Manhole covers (but excluding supplying of manhole
covers) providing and-fixing satet over Scraper manhole
etc, complete, chain wherever necessary as per the
stipulations in the type design complete as per latest
Manhole Type A Inside Dia. Of 1200mm for depth upto
Providing and constructing rectangular brick masonry
chamber for house connection as per type design in brick
masonry in C. M. 1:3 induding M-100 in foundation M-150
in benching inside plastering in C. M. 1:3 and outside 20 8001.22 Nos.
plastering in C. M. 1:3 coping in M200 and fixing RCC
precast manhole frame and covers, but Exdl, supply of
manhole and cover etc. complete exc, excavation.
Labour Charge for erecting of Manhole and House
Connection frame and Cover incl. Carting From Store and 320 808 Nos.
fixing with required material and curing etc. Completed.
Consl.Engineer Engineer
"DESIGN POINT" Thara Nagarpalika
Chief Officer President
Thara Nagarpalika Thara Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Tender.pdf
02 Form B-1.pdf
03 SCHEDULE B.pdf
04 Term and Condition.pdf
05 SPECIFICATIONS BUILDING WORK.pdf
06 Electrical Specifications.pdf
07 SPECIFICATIONS OF ROAD WORK.pdf
08 Vendor Civil work.pdf
09 TEST REQUIRE FOR CONSTRUCTION MATERIAL.pdf
10 GR All.pdf
10.1 DMO_2799_11-Mar-2024_662.pdf
Download all tender documents and submit your bid