Providing Fire safety system & Fire safety- fire hydrant and fire sprinkler system including civil work at Circle office Botad

Name of Work :- Providing Fire safety system & Fire safety- fire hydrant and fire sprinkler system

including civil work at Circle office Botad

Sr. No. ITEM QTY PER RATE AMOUNT

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

2 aggregates 20 mm nominal size) and curing 4 3767.61 cmt

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing & laying controlled cement concrete M

250 and curing complete including the cost of

3 form work and reinforcement for reinforced 4 5441.36 cmt

complete work in foundation footings, Base of

columns and mass concrete.

Providing & laying controlled cement concrete

M.250 with curing etc completed including the

4 cost of form work but excluding the cost of 5 8798.31 cmt

reinforcement for R.C.C. Work in - COLUMN

etc. for ground floor UP TO FLOOR TWO LEVEL

Providing & lying controlled concrete M-250 and

finishing smooth with curing etc complete

including the cost of form work but excluding the

cost of reinforcement for R.C.C. Work in . -plinth

beam,coping, Lintel ,sill beam, chhajahs,beam etc.

Providing & laying controlled cement concrete

M.250 with curing etc completed including the

cost of form work but excluding the cost of

reinforcement for R.C.C. Work in - Slab,staircase

etc. for ground floor stair cabin slab for all

Providing TMT Bar FE 500D reinforcement for

7 R.C.C. work including bending, binding and placing 4800.00 76.52 kg

in position complete upto floor two level

Brick work using common burnt clay building

bricks having crushing strength not less than

Kg./Sq.Cm in SUPER STRU.in Cement Mortar 1:6

(1-Cement : 6-fine sand)

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half brick

9 walls for interior plastering upto floor two level 140.00 193.49 smt

and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

Providing 10mm thick cement plaster in single

coat on Rough (Similar)side of single or half brick

10 walls for interior plastering upto floor two level 60.00 170.01 smt

and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand) - ceiling and soffit

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including

scaffolding curing etc. complete.

Main Fire Hydrant Pump LUBI/KSB/KIRLOSHKER

make SITC of: Back pull out type -Single Stage, Self

Mriming, Centrifugal Pump for Main Fire Pump

with Electric Motor, Meachanical Seal, Base frame

and Couplings. MOC:-Casing-CI, Impeller- Bronze,

Shaft- SS 410, Sleeve- SS410. Flow Capacity:

LPM Head: 90 mtr 2900RPM Pump shall be

capable of furnishing not less than 150% of rated

capacity at a head not less than 65% of rated head

he shut off head shall exceed 120% of rated head.

UOM:-Price Per Complete set of Pump + Motor +

Supplying, installation, testing and commissioning

of electric driven pressurisation pump suitable for

automatic operation and Jockey Fire Pump

LUBI/KSB/KIRLOSHKER make SITC of: Back Pull-

out End Suction Type - ingle Stage, Self Priming,

Centrifugal Pump for Jockey Fire Pump with

Electric Motor, Mechanical Seal, Base-frame and

13 Couplings. MOC:-Casing-CI, Impeller- Bronze, 1.00 Nos 87340.00

Shaft- SS 410, Sleeve- SS410. Flow Capacity:

LPM Head: 50 mtr Speed: 2900 RPM Pump shall

be capable of furnishing not less than 150% of

rated capacity at a head not less than 65% of

rated head The shut off head shall exceed 120%

of rated head. UOM:-Price Per Complete set of

Pump + Motor + Accessories.

Supplying, installation, testing and commissioning

of Diesel Engine Driven Main Fire Pump make

LUBI/KSB/KIRLOSHKER suitable for automatic

operation and consisting of following: (a)

Horizontal, centrifugal, back pullout pump to

ensure a minimum pressure of 3.5 kg / sq.cm. at

highest and farthest outlet at specified flow of

2850 lpm at 50m. head conforming to IS

standards. (b) Diesel engine of 1800 RPM water

cooled type with radiator conforming to relevant

BS & IS standard complete with auto starting

mechanism, 12 volts/24 volts electric starting

equipment, Diesel tank, exhaust pipe extended up

to 1 m. outside pump house duly insulated with

50 mm. thick glass wool with 1.0 mm. thick

aluminium sheet cladding, residential silencer,

instruments and protection as per specification,

stop solenoid for auto stop in the event of fault

with audio indications, painted with post office

red colour etc. as required. (C) 1 no. 2 hours

capacity day diesel storage tank fabricated from

mm thick M.s plates. Tank shall be provided with

inlet, outlet, overflow, air vent, drain connections,

filling connection and megnatic level indicator.

Tank shall be mounted on a suitable steel

structure (painted with 2 coats of red oxide

Supplying & erecting approved control cubical

panel (Star - Delta) made from16 G. CRCA sheet

duly painted with epoxy powder painted inside

and outside with hinged doors and locking

arrangement, consisting of suitable size of ON-

OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer cum water level. Guard

(Complete unit), Toggle switch to by pass Single

phase preventer cum WLG, indicating lamps for R-

YB phases, over load relay, Automatic water level

controller, Ammeter & Voltmeter each with two

way selector switch incoming wires duly socket

Crimped, Panel to be erected on angle iron frame

grouted on wall as directed. Star Delta & main

contactor, overload relay, thermal / Electronic

Star delta cutoff timer, start - stop push buttons.

The isolator overload relay & contactors of L& T,

Siemens, Redex or Cuttler Hamer make only.

Panel to be erected on angle iron frame ground

on wall.make-Sky/Belife/L&T

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................150 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................100 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................80 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................65 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................50 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................32 mm diameter

Piping for Fire Safety Works Providing & Laying 'C'

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above

ground pipe. with necessary pipe itments

(Flanges, Bands, Socket etc.) Vertically every 3 mt.

& Horizontaly every 2.5 mt. painted with one coat

of primer (Zinc Oxide) & two coats of finshing

paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.)

Consumables (Welding Rod etc.) and labour

charge. Quality : GI, C-Class (Heavy). Make -

Apollo/Surya prakash / Asian Note : The piping

installation has to be put to hydraulic test to1.5

times Working pressure before applying paint or

pipe coating and wrapping etc.

Complete.................25 mm diameter

Pressure Switch with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure

Gauge with Siphon Tube and Cock. MOC:-100 mm

23 Dial- Glycerin filled- Stainless Steel Body Pressure 3.00 Nos 2240.00

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Danfoss/Orion/Indfos

Pressure Gauge with Siphon Tube and Cock.

Supply, Installation and Testing of: Pressure

Gauge with Siphon Tube and Cock. MOC:-100 mm

24 Dial- Glycerin filled- Stainless Steel Body Pressure 3.00 Nos 1535.00

Gauge with GI Siphon Tube and Brass Cock. Size:-

Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for

mm make-Airmaster/H guru/Fiebig

NON- Return Valve Dual Plant Supply, Installation

and Testing of conforming to IS: 5312 complete

with rubber gasket, GI bolts, nuts, washers etc. as

required with necessary pipe fitments, hardware

and consumables. MOC:-Body: SS.plate SS

100 mm dia make-Zolato/Kartar/Osko

NON- Return Valve Dual Plant Supply, Installation

and Testing of conforming to IS: 5312 complete

with rubber gasket, GI bolts, nuts, washers etc. as

required with necessary pipe fitments, hardware

and consumables. MOC:-Body: SS.plate SS

80 mm dia make-Zolato/Kartar/Osko

Air Release Valve- 25 mm

Supply, Installation and Testing of: Air Release

Valve Check Valve with necessary pipe fitments,

hardware, union and consumables and Ball Valve

assembly on top of each riser for Air release

system. MOC:-Body: Gunmetal / SS. Make-ISI

Fire Hydrant Landing Valve IS 5290 (Stainless Steel

(SS-304), ISI Marked): Supply, Installation and

Testing of: Fire Hydrant Landing Valve with

necessary pipe fitments, hardware and

consumables. Stainless steel 63 Female single

outlet type – “A“Hydraulic,Test : 21 Kgf/cm2

28 working parts, Water Test : Water tightness 8.00 Nos 4265.00

14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2,

MOC:-Body: Stainless Steel (SS-304), Working

Parts: Stainless Steel (SS-304), Coupling: Stainless

Steel (SS-304), Standard: -ISI Marked. Size:-63 mm

(Flange End: NB 75 mm, PCD 160 mm) MAKE :

Newage/Aaag/Sangam

Fire Hose reel drum Ahemdabad type IS 884

mm x 30 m Supply, Installation and Testing and

commisoning: ISI 884. With Thermoplastic pipe

with SS Shuttoff Nozzle. Standard: - ISI Marked &

TAC Approved Hose. Size:-25 mm dia x 30 m long .

MAKE : Newage/Sangam/Fusion

Fire Hose pipe type A Is 636 and male female

coupling intenseous SS 304 with GI binding legth

15mtr complete set . MAKE :

Newage/Sangam/Fusion

Cabinet For Fire Hose (Hose Box)- Double door

Type Supply, Installation and Testing of: Fire Hose

Cabinet (Hose Box) suitable to accommodate

m long fire hoses and 02 no. of nozzle. With Lock-

n-key facility. Wall Mounting Design. MOC:

Gauge MS Box with Powder Coating Standard

with Size 700mmX500mmX250mm:- Suitable

MAKE : Newage/Sangam/Fusion

Short Branch Pipe IS 903 Conforming Nozzle.

Supply, Installation and Testing of: Short Branch-

32 pipe Nozzle. MOC: Stainless Steel (SS-304). 7.00 Nos 1780.00

Standard: ISI Marked, Heavy Quality. Test :

Kgf/cm2 No. MAKE : Newage/Aaag/Sangam

Supply Installation and commisioning of 25mm

33 Brass Ball valve for connection of hose reel 10.00 Nos 1780.00

thermoplstic pipe make-Zolato/Venus/Sant

Butterfly Valve 150mm Dia IS

Providing fixing testing and commissioning of SS.

34 Butterfly valve of class PN 1.6 rating of following 6.00 Nos 9760.00

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko

Butterfly Valve 100mm Dia IS

Providing fixing testing and commissioning of SS.

35 Butterfly valve of class PN 1.6 rating of following 3.00 Nos 7640.00

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko

Butterfly Valve 80mm Dia IS

Providing fixing testing and commissioning of SS.

36 Butterfly valve of class PN 1.6 rating of following 6.00 Nos 5640.00

sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk:

SS, Seat: Nitrile.Make Zolato/Kartar/Osko

Supply fixing and testing oriffice plate made out

of 6mm thick SS 304 with orifice required size to

be fitted between flange and landing valve of

external and internal hydrant to reduce pressure

at the outlate to the level of 3.5 kg/cm2

compleate as required

Fire Service In-let (In-let Connection for Fire

Brigade)-4 Way Type. Supply, Installation and

Testing of: Fire Service Inlet with necessary

hardware and consumables. MOC:-Body: Heavy-

uty CI. Couplings/NRV:SS Standard: -Made As per

IS Standard- Heavy duty quality. Size:-Couplings:

63 mm, 100 mm E-table Flange End .MAKE :

Newage/Sangam/Fusion

Providing, Installation and Testing Fire

extinguisher IS 15683-2006 ISI marked BIS with

Peso 3 years ABC powder type 6 Kg. Supply,

installation and testing of ABC powder fire

39 extinguisher necessary hardware and 13.00 Nos 1825.00

consumables. Stored pressure mechanism.

Charged with MAP-50% (ABC) Dry powder. with

wall mounting clamp.Make -V Safe/ Kanex

Providing, Installation and Testing of Fire

extinguisher - CO2 Gas type 4.5 kg. Supply,

installation and testing of CO2 Gas fire

40 extinguisher with necessary hardware and 13.00 Nos 4275.00

consumables. Standard - Confirming to IS:15683-

2006 with ISI mark with Peso 5 years certified.

Make - V-Safe/Kanex / Ceasefire

Providing, Installation and commisioning of Ball

41 valve type CI Body and Brass Foot Valve 100mm 3.00 Nos 9815.00

Dia with nut bolt and flange complete set

Providing and fixing, testing and commissioning of

42 Brass Sprinkler as per design and requirement as 165.00 Nos 170.00

directed by EIC make-Newage/Sangam/Fusion.

Providing and fixing, testing and commissioning of

Smoke detecor with complete wiring and fittings

as per design and requirement as directed by

EIC.make-Ravel/System Sensor/or equivalent

Providing and fixing, testing and commissioning of

Heat detecor with complete wiring and fittings as

per design and requirement as directed by

EIC.make-Ravel/System Sensor/or equivalent

Providing and fixing AUTOGLOW Signages in Block

45 / Small Letters of Specified Sizes: as per design 85.00 Nos 185.00

and requirement as directed by EIC.

Providing and fixing, testing and commissioning of

Conventional Fire Alarm control panel for G+5

46 building with 250 article for 16 zones required as 1.00 Job 75860.00

per engineer insruction Make: Ravel/System

Sensor/or equivalent

Providing and fixing, testing and commissioning of

47 Hooter cum strobe sounder with wiring complete 7.00 Job 3240.00

fittings Make: Ravel/System Sensor/or equivalent

Providing and fixing, testing and commissioning of

48 Manuel Call point with wiring complete fittings 7.00 Job 2915.00

Make: Ravel/System Sensor/or equivalent

Supplying and fixing air vessel made of 250mm

dia 8 mm thick MS sheet 1200mm in height with

air release valve on top and flange connection to

49 riser,drain arrangement with 25mm dia gun metal 1.00 Nos 32870.00

valve with required assesories pressure gauge and

painting with synthetic enamel paint of aaproved

shade as required

Making of hole by core cutting in concrete

member or masonary wall of diameter 0 to

50 mm as per requirement including all man material 20.00 Nos 700.00

and charges of core cutting machinery as directed

Charges for administrative consulting for

obtaining Fire NOC from Local authority and

providing fire system annual maintenance

contract with all the requried docuemnts and

process & mockdrill, awarness traning for staff as

per rules of fire at every 6 months for three year

as per GOG norms.

Total Cost. In Rs.

(B) Bidder's Offer ____ Above/Below of (A)

(C) Grand Total (C = A + B)

(C) Grand Total (C = A + B)

(D) Goods & Service Tax ( D = C x GST in % Prevailing or Applicable )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Final Offer with GST in Rs.

Final Offer with GST in Words:

CHIEF ENGINEER (MATERIAL)

PGVCL, CORPORATE OFFICE,