Estimate for the cost of renovation of existing BCRLIP Building for FDEOC near Wildlife Wardens office in Shendurney Wildlife Sanctuary during 2025-26

Labors for clearing the site

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1,5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50'm and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 (1 cement: 6 coarse sand) etc complete

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 (1 cement: 6 coarse sand) etc complete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Supplying welding and fixing the weld mesh of size 25x25x3mm GI coated wire welding and fixing to the prefabricated frames including painting over priming coat with synthetic enamel paint etc

Providing and fixing in roof using powder coated composition of alu-sink Trafford profile roofing sheet of 0.4 mm thick or nearest available thickness with overlap of 150mm at each ends fixing in position with polymer coated jor L. bolt or self drilling screws plane washers and EPDM washers including cutting sheet to the required size and shape

Providing and laying in position cement concrete of specified-grade excluding the cost of centering and shuttering All work up to plinth level 1-3/6(1 Cement: 3 manufactured sand derived from Recycled Concrete Aggregate (RCA): 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA))

12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 1tr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cen cement mortar 1:4 (1 cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete