Yearly tender 2022 2025 for Talegaon Dabhade Municipal Council Somatane Pump House, Indrayani Pump House Godambe Pump House Chaurai and Indrayani Filter Plant Maintenance of pumps motors starter panel

Amount

Reparing of 120 HP VHS type Motor

Removing and Dismaintling of 120 HP VHS type Motor with allied equipments etc complete

Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .

Supply of Following spares for above pumpset

Rotor balancing

best quality grease Ap3

140 No. bearing oil

Motor top bearing 7313/becbm

Motor bottom bearing 6317/c3

Conection Plate

Brass Lugs

Motor housing cover top

Motor housing cover bottom

Impller Neckring

Mechanical Seal

12 mm heavy duty Nutbolts ( s.s )

Transportation of motor with loading and unloading by crane with too and fromsite etc complete

Erection and assembling of 120 HP VHS type motor with allied equipments etc complete .

Repairing work for 100 HP Jasco Submersible

Dismantling & Erection of 100 HP Jasco make Submersible Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation & skilled labour charge etc.

b) Rotter Balancing

c) Motor Bush Top

d) Motor bush Bottom

e) Thrust Plate Top & Bottom

f) Pump Shaft Sleeve S/S

g) Pump Shaft S/S (New)

h) Pump Shaft Balance

i) Pump Impeller

j) Impeller Neck Ring

k) Impeller Balance

l) Impeller diffuser

m) Oil seal & Mechanical Seal

n) Coupling Bush

o) N.R.V.Rubber

p) O Ring

q) Nut Bolts

r) Pump Bush

s) 35 sqmm Cable

t) Waterproof Joint Kit

Repairing work for 100 HP KSB Submersible Motor & Pump

Dismantling & Erection of 100 HP KSB make Submersible Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation & skilled labour charge etc.

b) Rotter Balancing

c) Motor Bush Top

d) Motor bush Bottom

e) Thrust Plate Top & Bottom

f) Pump Shaft Sleeve S/S

g) Pump Shaft S/S (New)

h) Pump Shaft Balance

i) Pump Impeller

j) Impeller Neck Ring

k) Impeller Balance

l) Impeller diffuser

m) Oil seal & Mechanical Seal

n) Coupling Bush

o) N.R.V.Rubber

p) O Ring

q) Nut Bolts

r) Pump Bush

s) 35 sqmm Cable

t) Waterproof Joint Kit

Repairing work for 75 HP Karwel Submersible Motor & Pump

Dismantling & Erection of 75 HP Karwel make Submersible Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation & skilled labour charge etc.

b) Rotter Balancing

c) Motor Bush Top

d) Motor bush Bottom

e) Thrust Plate Top & Bottom

f) Pump Shaft Sleeve S/S

g) Pump Shaft S/S (New)

h) Pump Shaft Balance

i) Pump Impeller

j) Impeller Neck Ring

k) Impeller Balance

l) Impeller diffuser

m) Oil seal & Mechanical Seal

n) Coupling Bush

o) N.R.V.Rubber

p) O Ring

q) Nut Bolts

r) Pump Bush

s) 25 sqmm Cable

t) Waterproof Joint Kit

Repairing work for 10 HP KSB Openwell Submersible Motor & Pump

Dismantling & Erection of 10 Hp KSB make Submersible Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation & skilled labour charge etc.

b) Rotter Balancing

c) Motor Bush Top

d) Motor bush Bottom

e) Thrust Plate Top & Bottom

f) Pump Shaft Sleeve S/S

g) Pump Shaft S/S (New)

h) Pump Shaft Balance

i) Pump Impeller

j) Impeller Neck Ring

k) Impeller Balance

l) Impeller diffuser

m) Oil seal & Mechanical Seal

n) Coupling Bush

o) N.R.V.Rubber

p) O Ring

q) Nut Bolts

r) Pump Bush

s) 4 sqmm Cable

t) Waterproof Joint Kit

Repairing work for 5 HP Centrifugal Motor pump set

Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Top bearing

f) Motor Bottom bearing

g) Motor top and bottom bushing turning

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover Top

n) Motor housing Cover Bottom

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for 15 HP Centrifugal Motor pump set

Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Top bearing

f) Motor Bottom bearing

g) Motor top and bottom bushing turning

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover Top

n) Motor housing Cover Bottom

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for 50 HP Centrifugal Motor pump set

Dismantaling & Erection of 50 H P Centrifugal Pump set with Impeller & transportation from site to workshop & return etc

Repairing of centrifugal pump with required following spares with skilled labour charge etc

a) Impeller Brass bushing

b) Impeller

c) gland sleeve S/S material

d)Impeller neck Ring

e) Shaft S/S material (motor)

f) Shft S/S material (pump)

g)Impeller lock Key

Providing & fixing Special Stenghtning Heavy Duty Nut Bolts

a) rubber packing (Champion)

b) coupling set

c)Greese Ap3

d) gland

e) Mechanical Seal

Complete rewinding of motor with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Fan side bearing

f) Motor Pumpside bearing

g) Motor top and bottom Shaft, bushing turning, welding oil seal

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover fanside

n) Motor housing Cover pump side

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for 90 HP VT pump set

Dismantling & Erection of 90 H.P.V.T. pump set with bowl assembly, discharge head, column pipe, shaft, bearing bushing with VT Pump S.V.& reflex valves & allied equipments & transportion from site to workshop &return etc.

Repairing of V.T. pump with required following spares with skilled labour charge etc.

a) Stuffing box bronze bushing

b) Gland sleeve S/S material

c) Top bowl repair with providing & welding of M.S. Flange heavy duty with required sundry etc.

d) Column pipe repair with welding if ribs M.S. flange with machining etc.

e) Sypder Rubber Bush

f) Shaft S/S material (4 mtr)

g) Column Shaft S/S material (1.5 mtr)

h) Shaft Sleeve S/S material

Providing & fixing special strengthening heavy duty nut bolts

a) Rubber packing (Champion)

b) Neck ring brass

c) Bowl bush rubber

d) Bowl bush brass

e) Bowl turning & surface counter top & bottom

f) Impeller

g) Impeller qualate

h) Impeller qualate check nut

i) Impeller Turning

j) Spider bushing

k) Impeller Neckring

l) Gland Slive

m) Gland Housing Bush

Bowl assembly fitting

Complete servicing of 90 H.P.VT Pump with checking earth insulation, winding, balancing etc.

Tafflon Gland

Repairing work for 90 HP VT pump set

Dismantling & Erection of 90 HP Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation including Air drying, varnishing,backing & skilled labour charge etc.

Motor Stamping Repairing works

b) Motor cooling fan

c) Rotter Balencing

d) Best quality grease Ap3

e) 40 No. bearing Oil

f) Motor top Bearing

g) Motor bottam Bearing

h) Motor top & bottam busing,turning oil seal

i) Oil seal

j) Motor lock ratchet check nut lock key

k) Brass pipes & nipples.

l) Bearing check - nut

m) Ratchet bush key with lock nut

n) Motor housing Cover Top

o) Motor housing cover bottom

p) Motor cannection plate

q) Motor cannection lugs.

Repairing work for 240 HP Motor set

Dismantling & Erection of 240 HP Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation including Air drying, varnishing,backing & skilled labour charge etc.

Motor Stamping Repairing works

b) Motor cooling fan

c) Rotter Balencing

d) Best quality grease Ap3

e) 40 No. bearing Oil

g) Motor bottam Bearing

h) Motor top & bottam busing,turning oil seal

i) Oil seal

j) Motor lock ratchet check nut lock key

k) Brass pipes & nipples.

l) Bearing check - nut

m) Ratchet bush key with lock nut

n) Motor housing Cover Top

o) Motor housing cover bottom

p) Motor cannection plate

q) Motor cannection lugs.

Repairing work for 240 HP Pump set

Dismantling & Erection of 240 H.P.V.T. pump set with bowl assembly, discharge head, column pipe, shaft, bearing bushing with VHS motor S.V.& reflex valves & allied equipments & transportion from site to workshop &return etc.

Repairing of V.T. pump with required following spares with skilled labour charge etc.

a) Stuffing box bronze bushing

b) Gland sleeve S/S material

c) Top bowl repair with providing & welding of M.S. Flange heavy duty with required sundry etc.

d) Column pipe repair with welding if ribs M.S. flange with machining etc.

e) Sypder Rubber Bush

f) Shaft S/S material (4 mtr)

g) Column Shaft S/S material (1.5 mtr)

h) Shaft Sleeve S/S material

Providing & fixing special strengthening heavy duty nut bolts

a) Rubber packing (Champion)

b) Neck ring brass

c) Bowl bush rubber

d) Bowl bush brass

e) Bowl turning & surface counter top & bottom

f) Impeller

g) Impeller qualate

h) Impeller qualate check nut

i) Impeller Turning

j) Spider bushing

k) Impeller Neckring

l) Gland Slive

m) Gland Housing Bush

Bowl assembly fitting

Complete servicing of 240 H.P.VHS motor with checking earth insulation, winding, balancing etc.

Roller bearing

Tafflon Gland

Repairing work for 60 HP centifugal Motor & pump set

Dismantaling & Erection of 60 H P Centrifugal Pump set with Impeller & transportation from site to workshop & return etc

Repairing of centrifugal pump with required following spares with skilled labour charge etc

a) Impeller Brass bushing

b) Impeller

c) gland sleeve S/S material

d)Impeller neck Ring

e) Shaft S/S material (motor)

f) Shaft S/S material (pump)

g)Impeller lock Key

Providing & fixing Special Stenghtning Heavy Duty Nut Bolts

a) rubber packing (Champion)

b) coupling set

c)Greese Ap3

d) gland

e) Mechanical Seal

Complete rewinding of motor with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Fan side bearing

f) Motor Pumpside bearing

g) Motor top and bottom Shaft, bushing turning ,welding oil seal

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover fanside

n) Motor housing Cover pump side

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for Starter & starter set

Power Contactor C&S make LC1 FDP 200.230v AC Coil

Power Contactor C&S make LC1 FDP 115.230v AC Coil

Voltage Monitor Minitek VSPD 415V aux supply

Motor Protection relay minilek MPRD2 415V aux supply.

Timer BCH Make KRTPN , 16.0.05- 30 sec.

Timer BCH Make KRTPN , 22.0.05- 30 sec.

Auto Transformer for Motor starting suitable for 100 HP.

Digital Ammeter 96x96 230V AC aux supply AE make.

Digital Voltmeter 96x96 230V AC aux supply AE make.

MCCB C&S CS2B3-25KA 100 A

MCCB C&S CS2B3-26KA 250 A

MCCB C&S CS2B3-37KA 400 A

c&S HRC Fuse 32A size 00

P.F controller Nanovar trinity 4 step 96x96

Capacitors heavy duty type 5 KVAR

Capacitors heavy duty type 10 KVAR

Capacitors heavy duty type 15 KVAR

Power Contactor C&S make LC1D253 20 hp

Power Contactor C&S make LC1D259

Stardelta Timer 230V AC

Autoswitch 4 minitek

MCB 3 pole 50A C&S C'

Analogue Voltmeter 0-500v AC 96x96

Analogue Ammeter 0-60A CTR/5A 96x96

Auto Transformer for Motor starting suitable for 125 HP.

Voltage Monitor relay GIC 2-5A

Current Monitor relay GIC 2-5A

Power Contactor L&T MNX140 230V AC Coil

Power Contactor C&S LC1FDP- 265 A

VAF Meter Digital 96x96

MCCB L&T D Sine 400A 3 Pole

MCCB L&T DU 250C 25 KZ 415V 3 pole

MCCB L&T DU 125C 25 KZ 415V 3 pole

MCCB L&T D N 0-100D Sine 3 Pole 36 KA 15 HP

Capacitor 3 KVAR Barrel Type

Stardelta Timer GIC

VSP-3 Minitek Single phasing

MCB C 63 3 pole

Overload relay L&T MNZ 9-15 A

Ammeter 0-50A. 96x96 / 5A CTR

Power Contactor L&T MNX 16 A AC 3

MCB 63A 3 ploe C

Ammeter 0-30A. 5A CTR

LC 1D253 C&S Power Contactor

LC 1D259 C&S Power Contactor

Stardelta Timer GIC

Incoming MCCB L&T D sine 100 D 3 pole

VAF Meter Digital 96x96

Power Contactor 60HP ATS AV1-17022 , 170 A

Power Contactor 60HP ATS AV1-18011 , 80 A

Capacitor Contactor TC1 DK C&S

Overload relay 2-3.3

Repairs & Commissioning Labour Charge

Starter 1 to 20 HP Minor repairs

Starter 1 to 20 HP Major repairs

Starter ATS Minor repairs

Starter ATS Major repairs

ATS removing Transport & refitting

Electronic soft starter Minor repairs

Electronic soft starter Major repairs

HFSR Starter Minor repairs

HFSR Starter Major repairs

Power Distribution Board ACB repairs/servicing.

P.D.B Power Circuit major repairs etc.

P.D.B Power Circuit minor repairs etc.

Power Contactor CHINT NC-330

Jayashree Electron Make CTMR 9662

Aux Contactor ABB NC22 E

Aux Contactor C&S Ca2DN 1319

Voltage Monitor relay GIC 415 V

Motor Protection relay GC excel MLEDx

SMPS 2.5A 24C DC

Multifunction Meter 96x96

Digital Ammeter 96x96 230V AC aux supply AE make.

Modification from 3MC to 5MC on card level 175 hp

Power contactor C&S 265 Amp.

Power Contactor L&T make MNX140

Power Contactor L&T make MNX95

GIC make synchro Timer LM2000

SPP-GIC 25

Aux contactor L&T MN9

Overload relay L&T 3-5 MN

Incomer 400Amp L&T D sine 3 pole

Voltmeter digi 96x96 0.600v

Domain APFC relay 8 stage DP0012

Spare capacitor 5,10,15,20,40,50

SMPS 12V 3 Amp/230V AC I/P

Aux contactor 4 No+4NC C&S

MCCB C&S CS2A3 100A 3P. 10KA

Thyrister semikron SKKT162/16E

Thyrister semikron SKKT106/16E

Driver card for above

60 HP Electronic soft starter need to discard and fixup new one.

C&S LC1FDP200

C&S LC1FDP115

C&S LC1FDP253/9

C&S LC1FDP265A

C&S LC1FDP185

C&S LC1FDP80

L&T MNX 140

L&T MNX 18

CHINT-NC-330

75 HP Electronic soft starter need to discard and fixup new one.

Repairing work for10 HP Centrifugal Motor pump set

Complete rewinding of Centrifugal motor & Pump with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Top bearing

f) Motor Bottom bearing

g) Motor top and bottom bushing turning

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover Top

n) Motor housing Cover Bottom

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for3 HP KSB Openwell Submersible Motor & Pump

Dismantling & Erection of 3 HP KSB make Submersible Motor & transporation from site workshop & return etc. complete

Complete rewinding of motor with quality copper ‘ F ’ clamp insulation & skilled labour charge etc.

b) Rotter Balancing

c) Motor Bush Top

d) Motor bush Bottom

e) Thrust Plate Top & Bottom

f) Pump Shaft Sleeve S/S

g) Pump Shaft S/S (New)

h) Pump Shaft Balance

i) Pump Impeller

j) Impeller Neck Ring

k) Impeller Balance

l) Impeller diffuser

m) Oil seal & Mechanical Seal

n) Coupling Bush

o) N.R.V.Rubber

p) O Ring

q) Nut Bolts

r) Pump Bush

s) 4 sqmm Cable

t) Waterproof Joint Kit

Repairing work for1 HP VHS Motor set

Complete rewinding of 1 HP VHS Motor with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Top bearing

f) Motor Bottom bearing

g) Motor top and bottom bushing turning oil seal

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover Top

n) Motor housing Cover Bottom

o) Motor cannection plate

p) Motor cannection lugs

Repairing work for 2 HP VHS Motor set

Complete rewinding of 2 HP VHS Motor with quality copper F Clamp insulation including Air drying , varnishing , backing 7 skilled labaor charge

a) Motor Cooling Fan

b)Rotter Balancing

c) Best Quality grease AP 3

d) 40 No Bearing Oil

e) Motor Top bearing

f) Motor Bottom bearing

g) Motor top and bottom bushing turning oil seal

h) Oil Seal

i) Motor lock ratchet check nut lock key

j) Breass pipes & Nipples

k) Bearing check - nut

l) Ratchet bush key with lock nut

m) Motor housing Cover Top

n) Motor housing Cover Bottom

o) Motor cannection plate

p) Motor cannection lugs

L.T SWITCHGEAR & PROTECTION , H.T SWITCHGEAR & PROTECTION

[L.T. SWITCHGEAR AND PROTECTION]

D.O.L. Starter Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.

Up to 7.5 HP

Up to 10 HP

Assembled D.O.L. Starter Supplying and erecting assembled DOL starter in provided cubical panel, with ON- OFF push buttons, no volt coil, over load element and required power and control wiring complete.

Up to 7.5 HP

Up to 10 HP

F.A.S.D. Starter Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.

> 7.5 HP & Up to 12.5 HP

> 12.5 HP & Up to 20 HP

> 20 HP & Up to 25 HP

> 25 HP & Up to 40 HP

Contactor rating should be same for STAR, LINE and DELTA Connection.

F.A.S.D. Starter ( Assembled ) Supplying and erecting, assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load relay and ON-OFF push buttons, with necessary material and connected to supply, etc complete.

> 7.5 HP & Up to 12.5 HP

> 12.5 HP & Up to 20 HP

> 20 HP & Up to 30 HP

> 30 HP & Up to 40 HP

Auto transformer Starter with air break contactor ( Locally Fabricated ) Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end boxes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides.

Cubical Panel Size

1.25 m height X 0.75 m width X 0.45 m deep.

Cubical Panel Size

1.5 m height X 0.9 m width X 0.5 m deep.

FCMA / HFSR Electrical Soft starter

Electronic Motor Protection Relay (for LT motors)

Providing, installing in panel EMPR for protection like overload, phase failure, locked rotor, phase reversal with trip indication and adjustable over current function, DIN rail mounted.

Providing and erecting draw out type Vacuum Contactor Panel Indoor type including CT of required ratio for metering and motor protection relay with High speed trip relay.

Providing and erecting Resin Cast Indoor single phase double core CT of required ratio and VA burden for metering and protection purpose.

Resign Cast Indoor Single Phase, Double Core CT of required ratio

C.T. for 3.3/ 6.6 / 11 kV 15 VA Class 1/10- P-10

C.T. for 22 /33 kV 15 VA Class 1/10-P-10

Providing and erecting Resin Cast Indoor single phase Single core PT of required ratio and VA burden for metering purpose.

(11 kV / √ 3) / (110 Volt / √ 3)

(22 kV / √3) / (110 Volt / √ 3)

(33 kV / √3) / (110 Volt / √ 3)

Protection and auxiliary relays

Providing and erecting following type protection and auxiliary relay as required for Vacuum Circuit Breaker Panel / control relay panel.

Motor Protection Relays ( CT Operated) Providing, installing numerical motor protection relay for motors controlled through circuit breaker / with vacuum cotactor, providing instaneous 3 ph overcurrent , unbalance and single phasing ,earth fault and seperate built in stalling proction similar to ABB make type REM 601 or similar

Over Current and Earth Fault Relay (C T Operated )

High Speed Trip Relay / Master Trip Relay

VAJH 13 / MVAJ053 / PQ8nCH2JS

Combiflex /Electromagnetic Realy ( Voltage operated ) Voltage operated auxillary relay without indicator with self reset /hand reset contacts, plug in combiflex mounting similar ABB model RXP8n / RXPQ8n /VAJH 22A /VAJH 23 B

Auxiliary Relay for Transformer Protection

MVAA 11 / CV2 D 2 J

MVAA 31/ AVA33 / CV2D2J

Digital Timer

Providing, installing static digital timer with time delay on pick-up.

Automatic Semaphore Indicator

Vishal Electricworks

SHIVSHAMBHO ELECTRICAL