Providing of 16Mtr High Masts at Muslim Burial ground backside of Vasthralatha 37th Division and Hindu Burial ground near punnami ghat 38th Division in Circle 1 area

Fabrication, transportation and supply of 16 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp.

Earth work excavation with an approximate quantity of 6.0 Cum for erection of 16 Mtrs high mast and refilling with a quantity of 0.65 Cum of PCC 1:4:8, 2.60 Cum M 20 grade concrete and (110 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete

Supply and transportation of 200W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and with minimum warranty of two years. a) LUMINAIRE MAKE: Philips /Crompton / Bajaj / Havells / b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG as per the approval of the departmental authorities.

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-A9 / Lauritz Knudsen (Formerly L&T) as per the approval of the departmentl authorities.

Supply of 40-63A FP MCB 10KA C/D Curve ISI Mark of Makes: Legrand-DX3 / Schneider-A9 / Lauritz Knudsen (Formerly L&T) as per the approval of the departmentl authorities.

Supply of Peeta Boards of size 18" x 24" etc., complete for service mains as directed by the departamental authorities

Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 5KW of Three phase load with necessary clamping arrangements.

Supply and transportation of 16 Sqmm x 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) / 1554-I of Makes: Finolex / Paragon / Orbit / Finecab as per the approval of the departmental authorities.

Supply and transportation of Outer dia. 50mm and Inner dia. 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard) / Precision /CPE or its equivalent make as per the approval of the departmental authorities.

Earth work excavation for cable trench in all soils i.e., hard / loose ground soils and refilling of trench after laying of cable including all labour charges, sundries etc., complete as per directed by the departmental authorities.

Laying of U.G cable up to 50 Sqmm in trench / open area including inserting of cable in the HDPE Duct including all labour charges & sundries etc., complete as per directed by the departmental authorities.

Fixing of LED Luminaires with 3 Core cable and MCBs etc. excluding cost of materials including all labour charges, sundries etc., complete as directed by the departmentl authorities.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) up to 16Sqmm as per IS specification duly crimped with crimping tool, PVC tape etc. of Makes:Dowels / Jainson / Comet.

Supply of 3 core 1.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes:Finolex/Goldmedal/Finecab as per the approval of the departmental authorities.

Providing independent earthing by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Engaging of Air compressor 7Cmm (Diesel) on hire basis including hire charges, fuel charges, crew charges etc., complete as directed by the departmental authorities.

Supply, delivery and fixing of sintex box for fixing of MCBs, fuses etc., including clamps, bolts nuts, washers, transportation, labour charges and incidental charges etc., complete as per site condition and as per directed by the departmental authorites.