Loading…
Loading…
Tender Value
₹11.3 L
EMD Value
₹11,275
Closing Date
9 Mar 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
chief officer Talala Nagarpalika
BEAUTIFICATION OF GVP POINT AT VARIOUS AREA IN TALALA NAGARPALIKA AREA, TALALA, DIST. GIR-SOMNATH (2nd ATTEMPT )
282335
20260301
Open
Civil - All
Junagadh
14 documents required · 14 mandatory
₹1,062
Chief Officer Talala Nagarpalika
₹11,275
2 Mar 2026
2 Mar 2026
2 Mar 2026
9 Mar 2026
2 Mar 2026
NAME OF WORK: - BEAUTIFICATION OF GVP POINT AT VARIOUS AREA IN TALALA
NAGARPALIKA AREA,TALALA, DIST. GIR-SOMNATH ( 2nd attempt )
SR. NO. DISCRIPTION AMOUNT
SCHEDULE DEVELOPMENT WORK OF POINTNEAR NEAR GALIVAD ROAD AS A
B-1 GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
SCHEDULE DEVELOPMENT WORK OF POINTNEAR NEAR MARKET CHOWK AS A
B-2 GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
SCHEDULE DEVELOPMENT WORK OF POINTNEAR NEAR BUS STAND AS A GARBAGE
B-3 VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST. GIR-
SCHEDULE DEVELOPMENT WORK OF POINTNEAR NEAR OPP. DELTA COMPUTER AS A
B-4 GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
SCHEDULE DEVELOPMENT WORK OF POINTNEAR NEAR KANYASHALA AS A GARBAGE
B-5 VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST. GIR-
SCHEDULE DEVELOPMENT WORK OF POINTNEAR OPP. NAGARPALIKA HIGH SCHOOL AS
B-6 A GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR GOPA GARBI CHOK AT
B-7 TALALA DIST.GIR-SOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR COURT BUILDING AT
B-8 TALALA DIST.GIR-SOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR DHARESHWAR SOCIETY
B-9 AT TALALA DIST.GIR-SOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR VIRPUR ROADAT
B-10 TALALA DIST.GIR-SOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR SIDI VADA AT TALALA
B-11 DIST.GIRSOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR MARKET CHOK AT
B-12 TALALA DIST.GIRSOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR KAILASH NAGAR AT
B-13 TALALA DIST.GIR-SOMNATH.
SCHEDULE REMOVAL OF GVP AND BEAUTIFICATION AT NEAR KENAL AT TALALA
B-14 DIST.GIRSOMNATH.
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR NEAR GALIVAD ROAD AS A
GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.80 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.74 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.22 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 2.13 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 2.68 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.11 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.15 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.15 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 4.00 Each 7575.00
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides 1.00 Each 720.13
to be applied time to time wherever required. also damaged or dry plant which
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.36 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 16.00 rmt 361.64
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR NEAR MARKET CHOWK AS A
GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.80 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.74 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.22 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 2.13 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 2.68 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.11 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.15 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.15 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 3.00 Each 7575.00
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides
to be applied time to time wherever required. also damaged or dry plant which 1.00 Each 720.13
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.36 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 16.00 rmt 361.64
16 Wall painting (two coats) natural/artifical art 3D picture on surface to given an
required shape brushing the surface free from mortar dropping and other
smooth to remove alldirt, and remains of loose powdered materials. Etc
complete 15.00 sqm 499.95
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR NEAR BUS STAND AS A GARBAGE
VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST. GIR-
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.80 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.74 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.22 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 2.13 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 2.68 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.11 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.15 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.15 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 3.00 Each 7575.00
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides
to be applied time to time wherever required. also damaged or dry plant which 1.00 Each 720.13
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.36 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 16.00 rmt 361.64
16 Wall painting (two coats) natural/artifical art 3D picture on surface to given an
required shape brushing the surface free from mortar dropping and other
smooth to remove alldirt, and remains of loose powdered materials. Etc
complete 15.00 sqm 499.95
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR NEAR OPP. DELTA COMPUTER AS A
GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST.
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.80 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.74 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.22 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 2.13 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 2.68 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.11 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.15 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.15 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 4.00 Each 7575.00
11 Providing and fixing an outdoor dustbin twin set for and dry waste with an m.s.
stand, a 100 litre capacity nilkamal or equivalent brand, two bins of different
colours, and a stand that weighs at least 50 kg. and everything is finished with
a 1 : 2 : 4 p.c.c under the supervision of the engineer in charge. 1.00 Each 8029.50
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour 1.00 Each 720.13
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides
to be applied time to time wherever required. also damaged or dry plant which
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.36 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 16.00 rmt 361.64
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR NEAR KANYASHALA AS A GARBAGE
VULNERABLE POINTS TALALA NAGARPALIKA, TALALA DIST. GIR-
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.10 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.76 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.03 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 1.72 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 1.98 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.67 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.89 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.89 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 2.00 Each 7575.00
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides 2.00 Each 720.13
to be applied time to time wherever required. also damaged or dry plant which
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.07 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 24.00 rmt 361.64
16 Wall painting (two coats) natural/artifical art 3D picture on surface to given an
required shape brushing the surface free from mortar dropping and other
smooth to remove alldirt, and remains of loose powdered materials. Etc
complete 30.00 sqm 499.95
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
DEVELOPMENT WORK OF POINTNEAR OPP. NAGARPALIKA HIGH SCHOOL
AS A GARBAGE VULNERABLE POINTS TALALA NAGARPALIKA, TALALA
DIST. GIR-SOMNATH
Description Qty Unit Rate Amount
1 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (A) For
Loose or Soft soil 2.10 cum 117.08
2 Excavation for foundation up to 1.5 Meter depth including sorting out and
stacking of useful materials and disposing of excavated stuff any lead (B) For
Dense or Hard soil 0.76 cum 149.67
3 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm
thickness including watering, ramming and consolidating etc. complete. 1.03 cum 289.06
4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering 1.72 cum 130.39
5 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6-
Graded brick bat aggregate 40mm normal size) and curing complete excluding
cost of formwork in (A) Foundation and Plinth 1.98 cum 2986.00
6 White Stone Bela masonry work in partition walls up to 15 cm thickness in
cement Mortar 1:4 (1- Cement : 4-course sand) 3.67 Sqm 652.36
7 20 mm thick sand faced cement plaster on walls up to height 10 meters above
ground level consisting of 12 mm thick backing coat of c.m. 1:3 (1-cement : 3-
sand) and 8 mm thick finishing coat of c.m. 1:1 (1-Cement : 1-Sand) etc.
complete 4.89 Sqm 326.11
8 Finishing wall with weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose powdered materials. etc
complete 4.89 Sqm 114.53
9 Providing and fixing pre-cast Rubber Dye / steel Dye interlocking concrete
block 60mm thick with grade of concrete M300 pneumatic compressed /
vibrated mechanically and as per approved design Confirming to IS 15658 :
2006 including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc. Complete.
10 Providing & Fixing cast Iron Bench made up of 13 MS square tubes (50 mm x
25 mm) in length of 1500 mm size decorative stade Length - & and painting
bench selection as per Engineer in charge 2.00 Each 7575.00
11 Providing and installing 4G Solar Bullet Camera as per specification below
* H. 265+, 4 Megapixel
* 2.8 mm Fixed Lens, 2 White Led 15 Meter Distance, 2 Array LED 20 Meters
* Night Vision Modes : B & W / All time color/ Smart Mode
* Built- in PIR sensor
* Built- in Battery 10400 mAh, with 5W solar Pane
* Supports all type of 4G SIM 1.00 Each 8286.04
12 Supplying and erecting approved make Octagonal pole made from HR sheet
steel. The pole should be made as per IS. and shall be coated with hot dip
galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with
integral Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer considering site
requirement. (A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia. 3 mm
thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm
long with necessary G.I. J Bolts. Approx weight 29 kg 1.00 Each 4237.96
13 Tree plantation are to be planted as per the detailed planting drawing, labour
charges, for digging of pit as per detailed specification filling of organic
manure, fertilizer, insecticides etc. and planting of plant as shown in the
drawing, filling the pit, proper pressing, supporting and watering. complete
including maintenance for 3 years with watering, organic manure, insecticides 2.00 Each 720.13
to be applied time to time wherever required. also damaged or dry plant which
is not grow up, to be replaced. (A) (Average height 8 to 10 feet of plant will be
14 Filling with black garden soil in any thickness completed. 0.07 Cum 289.06
15 Providing and fixing pre-cast concrete kerb stone of gray cement based
concrete block 30cm length, 30cm height and 15cm thick of m20 grade concret
as per approved design and including excavation for fixing the join with C : M
1 : 3 ( 1 cement : 3 fine sand ) etc complete. 24.00 rmt 361.64
16 Wall painting (two coats) natural/artifical art 3D picture on surface to given an
required shape brushing the surface free from mortar dropping and other
smooth to remove alldirt, and remains of loose powdered materials. Etc
complete 30.00 sqm 499.95
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR GOPAL GARBI CHOK AT
TALALA DIST.GIR-SOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR COURT BUILDING AT TALALA
DIST.GIR-SOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR DHARESHWAR SOCIETY AT
TALALA DIST.GIR-SOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR VIRPUR ROAD AT TALALA
DIST.GIR-SOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR SIDI VADA AT TALALA
DIST.GIRSOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR MARKET CHOK AT TALALA
DIST.GIRSOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR KAILASH NAGAR AT TALALA
DIST.GIR-SOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin) 1.00 Cum 6745.79
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
REMOVAL OF GVP AND BEAUTIFICATION AT NEAR KENAL AT TALALA
DIST.GIRSOMNATH.
Description Qty Unit Rate Amount
1 Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and
despositing on the road side slope as directed up to 50 mt. lead.
2 Providing and laying cement concrete 1:3:6 (1 cement 3 coarse sand
6 Machine cut stone aggregate 40mm nominal size) and curring
complete excluding cost of formwork in (a) Foundation and plinth
3 Providing and fixing Pre-cast rubber dye/steel dye inter locking
concrete block 60mm thick with grade of concrete M-300 punmatic
compressed by mechanically pressed and as per approved design
confirming to IS 15658:2006 including 35mm sand/stone dust/greet
layer for levelling and filling the joints with sand in proper line and
level as per guidlines of IRC : 63-2018 etc Complete.
4 Providing and fixing pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
M200 grade concert as per approved design and including excavation
for fixing in proper line and level, filling the joint with C:M 1:3 (
1cement : 3 fine sand) etc complete.
5 Providing & Fixing cast Iron Bench made up of 13 MS square tubes
(50 mm x 25 mm ) in length of 1500 mm size decorative stade
Length - & and painting Bench selection as per Engineer in charge
6 Supply, Installation, Testing and Commissioning of 4G Solar 3MP
PTZ Outdoor Dual Lens Camera 128 GB SD card, 1 year warranty
7 Drawing picture on existing wall including finishing surface and all
paint, colour and required material and as per guide nagarpalika
engineer (Related swachchha bharat mission, climate exchage and
other save water etc)
8 Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 90cms. rectangle as per the design of IRC-67-1977 pre
treated with phospheting process & acid teching; coated with one
coat of epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from
suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;
painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of
size 45 x 45 x 60cms. for each leg. including excavation curing tec.
complete under the supervision of engineer in charge. (A) Engineer
9 Supplying and erecting approved make Octagonal pole made from
HR sheet steel. The pole should be made as per IS. and shall be
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable
suspend local wind speed with integral Junction box consist of
terminal plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. and C.C. Foundation (C) 5 Mtr. Long
70 mm Top X 130 mm bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4 M16 Bolts and 600mm long
with necessary G.I. J Bolts .Approx Pole weight 46 kg
10 Providing & Supplying Aristo outdoor twin waste bin (80 Ltr
capacity Double Bin Hanging Dustbin)
1 % Electrification Charge Rs
I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered
amount mentioned above.
Tendered amount put to tender Rs. 11,27,508.00 Tendered amount put to tender Rs.
Deduct. % below Rs. Add.: % Above Rs.
Net Rs. Net Rs.
In words In words
President Chief Officer
Signature of Contractor. Talala Nagarpalika Talala Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01-Talala Garbage Vulnerable SBD.pdf
02 GR All.pdf
03 - GVP POINT SCHEDULE B.pdf
04. SITE VISIT CERTIFICATE.pdf
05 - drawing.pdf
Download all tender documents and submit your bid