TOILETS INTERNAL WATER SUPPLY /FITTINGS AND JOINERY TO CERTAIN BUILDINGS UNDER DGNP

Amount

Dismantling floor hearth or wall tiling including cement mortar (but not backing) removing off the premises complete all as specified and directed

Demolition of cement concrete ( un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 40 mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in flooring finished the surface even without using extra cement complete all as specified and directed

M&L for 25 mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed

M&L15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L Non-skid coloured ceramic tiles(Square or rectangular) 7 to 8mm thick area of exceeding 0.11 sqm but not exceeding 0.18 sqm area of in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile surfaces complete all as specified and directed.

M&L Granite (of any type) tiles 20mmthick machine cut, bedded andjointed with grey cement slurry and pointed with white cementwith admixture of pigment tomatch the shade of granite stone includinggrinding and polishing complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar (1:4) as backing coat complete all as specified and directed .

M&L Glazed ceramic tiles in vertical surface 300x200x 6, 6 to 7 mm thick as like skirting/dado, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc complete all as specified and directed.

M&L Rendering 15mm thick CM 1:4 on fair faces of brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10mm thick CM 1:6 on fair faces of brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying two coats of plastic emulsion over a coat of alkali resistant primer including a coat of putty finish complete all as specified and directed.

Taking down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed .

All as per item No 15 above but 20mm bore steel tubing.

S&F 15mm tubes,'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

All as per item No:17 above but 20mm bore.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing of bolts to floor and fixing of seat cover, flushing cistern, flush pipe and PVC connection pipe etc complete all as specified and directed.

S&F in repairs, viterous china urinal, bowl, type flat back of size 465X355 X265 mm white (minimum) with grating and union for discharge pipe complete all as specified and directed

S&F in repairs, Vitreous china urinal partition white of size 310 x 700mm including all fittings complete all as specified and directed

S&F in repairs, 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F in repairs plastic water closet seat and cover black, closed pattern with flat bottom, and cover & mild steel chromium plated or aluminised hinging device for EWC etc complete all as specified and directed.

S&F in repair wash basins, viterous china white flat back type size 550x400mm including cutting for and pinning in ends of brackets or erecting stand incl all fittings etc all as specified and directed.

S&F urinals in repair spreader of PTMT any colour for fixing with 15mm dia pipe. complete all as specified and directed

S&F 32mm dia waste coupling of PTMT suitable for urinals. complete all as specified and directed

S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed..

S&F PVC connection (high density) 15mm dia 600mm with PTMT nuts both ends with rubber washer all as specified and directed.

S&F waste pipes 32mm dia LDPE, UPVC pipes of pressure rating 6Kg/cm2 for wash basins and urinals complete all as specified and directed.

S&F in repairs, 40 mm dia., waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs, 15mm dia pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly- nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs, 15mm dia stop valve/angle cocks, fancy type, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs 15 mm dia, push taps any colour high pressure of PTMT screwed for iron pipe and fixed complete all as specified and directed

S&F brass chromium tubular towel rail, 20mm dia D type 60cm long between flanges in repairs complete all as specified and directed.

S&F 15mm dia hand shower (health faucet) with 8mm dia, 1 meter long flexible tube & wall hook fancy type, as fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) of following model of with P trap, black plastic cover closet seat, closed pattern with flat bottom, including cover and mild steel cromium plated hinges device with rubber buffer, 32 mm dia cromium plated brass flush tube, PVC valveless syphonic action type flushing cistern, low level 10 ltr capacity, white with inlet ball valve flat and handle including bracket including all joints cutting and making good the walls and floor where required, white lead TW plugs anti syphonage pipe joint to socket or stopper etc complete for finished items of work all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2.0 Sqm each complete all as specified and directed

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply and fix in openings as per specificatin and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet of back face, supply and fix in frame at site as per specification complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed.

S&F powder coated aluminium door shutters, partition aluminium section weighing 0.55 kg/m including joining cleat, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F powder coated aluminium windows and ventilarors shutters, parttion side hung type without sash, aluminium sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long, hinges types B-21 100mm long, suitable handles, tower bolts including all fittings etc complete all as specified and directed.

S&F 12mm thick prelaminated particle board exterior grade, laminated both sides with decorative finish complete all as specified and directed.

S&F 6mm thick sheet tinted glass of good quality fixed with glazing clips exceeding/not exceeding 0.50 Sqm in each pane including rubber beeding/gasket etc complete all as specified and directed

S&F in repairs for brass mortice lock vertical type of size 100mm, 4 levers complete all as specified and directed.

S&F Door closure hydraulically regulated aluminium (die cast) body universal type designation No. 3, as fixed in repairs, complete all as specified complete all as specified and directed.

S&F aluminium anodised grills of sections for door and windows with one or core rebates including jointing cleats/beading 'U' or 'H' channel for fixing etc. complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of operture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Removing the damaged/defect aluminium doors of any size and description and refixing the door in same position after repairs including replacement of new aluminium sections like joining cleats, glazing clips, rubber packing, snap beading, screws, pegstays, hinges, aluminium handles, towerbolts etc of same size complete all as specified and directed.

Removing the damaged/defect aluminium windows of any size and description and refixing the door in same position after repairs including replacement of new aluminium sections like joining cleats,glazing clips, rubber packing,snap beading, screws, pegstays, hinges, aluminium handles, towerbolts etc of same size complete all as specified and directed.

S&F for 100mm butt hinges medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F for 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm aluminium handles cast type anodised complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 3.0mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for 75mm butt hinges medium weight, cold rolled mild steel and fixed,complete all as specified and directed.

S&F for 100mm long aluminium anodised barrel tower bolts of extruded section and fixed,complete all as specified and directed.

S&F for 100mm aluminium handles cast type anodised complete all as specified and directed.

S&F in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs vertical PVC venation blinds reversible type for windows including necessary accessories etc complete all as specified and directed by Engineer-in-charge.

Removing building material etc (other than soil) to a distance of 15 Km away from the DGNP & Dockyard premises including loading unloading and depositing in civil area at contractor s own responsibility complete all as specified and directed.

SRI DHANESWARI ENGINEERING WORKS

M/S REAL POWER SYSTEMS