Providing LWSS to GP Marathu Janed Natned Randhara in Tehsil Sadar Distt Mandi HP

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregated 40mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (uncoursed brought in to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggragate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement:6 sand)in all leads and lifts.

Half brick masonry in common butnt clay building bricks in cement mortar I :4 ( I cement 4 sand ) 2nd class bricks in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc. up to 200mm in thickness in all leads and lifts

Vertical Surface such as walls (any thickness) partitions and the like including attached buttresses, plinth and string courses and the like. (For retaining Wall)

Providing and laying cement concrete 1:2:4 ( 1 cement:2 sand: 4graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work and reinforcement in:- Suspended floors roofs landing and sheleved and their supports balconioes, beams girderss, bressumers and cantilivers upto floor two level in all leads and lifts

Providing & Laying Cement Concrete 1:5:10 (1 Cement : 5 Sand : 10 Graded Stone aggregate 40 mm normal size) with 15% plum and curing complete excluding the cost of form work in retaining wall/breast wall, the size of plums shall usually be 150 mm to 300 mm as per H.P.P.W.D specification in all leads and lifts

Boulder Filling behind the retaining Wall / Breast Wall in all leads and lifts

Providing Tor Steel reinforcement for RCC work including bending , binding and placing in position complete upto floor two level in all leads and lifts

Supplying and fixing of cast iron manhole cover with frame 455 x 610 mm rectangular C.I. cover (light duty) single seal pattern the weight of cover 23 Kg. and weight of frame 15 Kg. The total weight of cover and frame to be not less than 38 Kg. compelete in all leads and lifts

Providing wood work in frames of door, windows, clerestory windows and other frames wrought , framed and fixed in position in all leads and lifts (2nd class deodar wood).

Providing and fixing panneled glazed or panelled and glazed shutters for doors windowns and clerestory windows, including black enamelled iron butthinges with necessary screws 40 mm thick in all leads and lifts (2nd Class Deodar Wood).

Brick work using comon brunt clay builing bricks in super structure in pment mortor 1:4 (1cement:4 sand)in all leads and lifts (2nd class bricks).

15mm cement plaster in single coat on rough side of brick /concrete stone walls for interior plaster up to floor two elvel including arrises, internal rounded angles, chamfers ad/or rounded angles not exceediong 80mm in girth and finished even and smooth in C.M 1:6 (1Cement :6 Sand) in all leads and lifts

6mm cement plaster to ceiling in cement mortor 1:3 ( 1cement: 3 sand) in all leads and lifts

White glazed tiles 6 mm thick in flooring cement mortar 1:3 (1cement : 3 sand) finished with flush pointing in white cement in all leads and lifts

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 :3 ( 1 cement : 3 sand ) and jointed with cement slurry in all leads and lifts

Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth in all leads and lifts

Providing and fixing aliuminium sliding door bolts with bolts and nuts screws etc. complete in all leads and lifts .250 *16 mm

Providing and fixing aliuminium tower bolts ( barrel type) with screws etc. complete in all leads and lifts 200 * 10 mm

Providing ad fixing aliuminium handles with necessary screws etc. complete in all leads and lifts 125 mm .

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed primer paint brushing wood primer pink in all leads and lifts.

Painting two coats on new wood and wood based surfaces with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white in all leads and lifts.

Providing and fixing automatic flushing cistern with a pair of CI or MS bracket complete with fitting including CI Syphonic apprature masquits proof lid, CP brass unions and coupling for connecting with inlet outlet and over flow pipes including cutting holes and making good the same Over flow pipe to be measured and paid for seperately (Viterous china 5 liters capacity in all leads and lifts.

Providing and fixing vitreous china wash down water closet (Indian Type, W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( Seat and cover to be measured and paid for separately) (White colour) in all leads and lifts.

Providing and fixing 100 mm size P or S trap for water closet ( Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1cement : 1 sand) Sand cast iron in all leads and lifts.

Providing & fixing viterious china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white in all leads and lifts.

Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour) in all leads and lifts.

Providing and Fixing of water storage tank sintex having of capacity 500 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects in all leads and lifts.

Providing and fixing on wall face PVC (D - Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads , lifts and carriage of materials.110 mm nominal bore in all leads and lifts.

Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete.75 mm nominal bore in all leads and lifts.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts.) 15 mm nominal bore in all leads and lifts.

Providing and fixing full way wheel valve 15 mm dia Gun metal in all leads and lifts.

Providing and fixing C. I cowl 100 mm dia in all leads and lifts.

Providing and fixing brass bib tap (superior qualityor heavy type) 15 mm dia in all leads and lifts.

Providing & Fixing CP Brass Soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required in all leads and lifts. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required in all leads and lifts. i) 2x1.50 Sq. mm.

ii) 2x2.50 Sq. mm.

(a) Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required in all leads and lifts.

(b) Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required in all leads and lifts.

(a) Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required in all leads and lifts.

(b) Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required in all leads and lifts.

Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required in all leads and lifts. ((a) 229 mm.x 102 mm.x 60 mm. deep

(b) 203 mm.x152 mm.x 60 mm. deep

Providing and Supplying CFL 1 x 23 watt of reputed make in all leads and lifts.

Providing and Supplying of CFL 1 x 5 watt in all of reputed make in leads and lifts.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole) in leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in a lead all leads and lifts.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts in all leads and lifts.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, huttering, finishing and reinforcement : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm in all leads and lifts.

Providing, Manufacturing, Supplying and Fixing of Fencing Panel of Size. 2.40 M X1.20 Meters fitted with Expended Metal Jali 25 X 25 mm mesh welded with M.S. angles for stand 40 x 40 x 5 MM including cutting, welding, painting with red oxide paint complete in all respect and as per with MS flat cover 25 X 5 MM M.S. hold fast made of M.S. angle 40 x 40 x 5 MM mesh panel of size 2.40 X 1.20 M fitting with expended metal mesh embended in cement concrete Pillars complete in all respect as per direction and to the entire satisfaction of the Engineer - in - Charge.

RAVI SINGH

JAGDISH CHAND