COMPREHENSIVE MAINTENANCE INCLUDING PERIODICAL SERVICES AND DAY-TO-DAY MAINTENANCE WORKS OF B/R, E/M NATURE WORKS, MISC ITEMS SUCH AS SEWAGE DISPOSAL ETC FOR SMA AREA, ELLISON AVENUE AND GARUDA HOUSE AT NAVAL BASE KOCHI

Amount

S&F 32 mm dia PVC waste pipe with cup head for Wash Hand Basin as in repair complete all as specified and as directed..

S & F in repair Pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down and fixed complete all as specified and as directed..

S&F in repairs CP tubular towal rail 20mm dia , 600mm long all as specified.(Brass chromium plated), Make-KAG Aqua or equilvent Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair for CP towel ring round with flang complete all as specified and directed. cat part No. ACN-CHR-1121BN of Jaquar or equalent as approved complete all as specified and as directed.

S&F in repair 150x150mm SS grating doom with or without hole for waste pipe complete all as specified and directed.

S&F peg set of 6 pin, hooks & rail of stainless steel and fixed with screws complete all as specified and directed.

S & F in repairs Soap dish fixed with screws Cat No. CAN-CHR-1131N of Jaquar or equalent as approved complete all as specified and as directed.

S & F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed

S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long incl aluminium alloy bracket and guard rail complete all as specified and as directed.

S&F in repair corner shelf with 5.5 mm thick sheet glass and SS railing of approved quality fixed with brass screw complete all as specified and directed Cat No. CAN-CHR-1173 of Jaquar or equalent

S&F in repair for 25mm curtain rod powder coated anodized aluminium alloy fancy brackets and knobs complete all as specified and directed.

S&F in repair Waste fittings, brass, chromium plated 40mm dia for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed waste coupling for sink (make: ZIM/GMG/PARKO) complete all as specified and as directed.

S & F in repairs Plastic seat and cover, any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete all as specified and as directed.

S & F in repairs PVC connection 15mm bore 45cm long with complete all as specified and as directed.

S/F in repair 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. ( Make:Crown / Jyothi / Argent ) complete all as specified and as directed.

S/F in repair 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. ( Make:Crown / Jyothi / Argent ) complete all as specified and as directed.

S/F in repair 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S/F in repairs 125mm long Aluminium handles, cast type, anodised complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

M & L for continuous welding in repairs exc 2.5cm but n exc 5 cm in length Thickness of Metal to be welded not exc 6mm complerte all as specified and directed.

M&L cutting out floor and removing damaged floor/nahani trap, providing and fixing new floor trap/Nahani trap including making good floor to match existing flooring incliding joining trap to pipe line, sealing any voids, with CM 1:3 including water proofing compound,cement concrete 1:2:4,cleaning the pipes etc complete all as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.complete all as specified and as directed.

M&L for rendering 10mm thick on brick work or concrete wall surfaces in 1:6 cement mortar, finished even & smooth without using extra cement all as specified and directed

M&L cement Plaster in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth without using extra cement with using Approved WPC complete all as specified and as directed. Note : WPC shall be meassured separate item

M&L for rendering 5mm thick on ceiling surfaces in 1:3 cement mortar finished even &smooth without using extra cement all as specified and directed

M&L for preparation of newly plastered wall surfaces and application of one coat of primer ,and two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and application of two coats of cement based paint over a coat of primer all as specified and directed

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed

S&F in repairs stainless steel sink with draining board made out of 1.0mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm all as specified .

S&F in repairs stainless steel plate rack of size 36inchX31InchX10 Inch made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8) SS screw and round pipe fixed to wall with screws complete all as specified and as directed. [Make- Blue star sliver shine cat No KPR-315 or Equivalent from Nirali/Jain Brothers Sanitation Pvt Ltd (Jayna) as approved by GE

S&F in repair vitreous china wash hand basin (padestal pattern), white, flat back, size 450mm x 300mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia including fixing of pillar tap complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repair 4mm thick Sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repair 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed

S&F in repair 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed

M&L for adjusting, easing and minor repairs to aluminium windows of any size, pattern and with two/three shutters & and ensuring proper functioning of the windows including changing of pivot,repairs to lock,handle,rubber beadings etc all as directed

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced n.exc 15 cm complete all as specified and as directed.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section,unframed work complete all as specified and as directed.

M/L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M/L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

M/L 2nd class HW Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 sqcm & n exc 25 sqcm complete all as specified and as directed.

M/L 2nd class HW Clean sawn battens at 15 cm centres,exc 5 & n.exc 15 sqcm complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L 2nd class HW Weather boarding, clean swan, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed..

M/L Prepairing the surfaces of battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with 2 coats of creosote oil complete all as specified and as directed.

M/L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with 2 coats of creosote oil complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and as directed.

S & F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L-hook or cranked bolts.complete all as specified and as directed.

S&F for pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.

S&F for pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. Note applicable for item Nos 37 to 58 These item shall be aproved by GE. These item shall be purchased and kept in his own store by the contractor and need fix immediately on receipt of complaint slips.

Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repair complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including frame work. cover fillets etc complete all as specified.

Supply, Providing and fixing suspended false ceiling consisiting of 12mm thick Gypsum seamless board suspended on GI frame work with staggered joints, GI frame work to consist GI perimeter channel 25mm x20mm of 22 gauge along perimeter of false ceiling. Channel section of 50x25mm of 22 gauge and at 300mm C/C throughout one way fixed with Serew/nut bolt and other direction 40 x 15mm x 22 gauge channel provided for interlocking with GI cleat and expansion fasteners including hangers 6mm dia G.I. fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the gypsum board with joining compound paper tape and two coat plasting emulsion paint over one coats of primer & one layer putty 1.5mm thick suitable for gypsum board (As per the recommendation s/ practice) including necessary scaf folding and shuttering complete as directed as specified and directed by Engr-in-Charge.

S&F for powder coated aluminium snap grid frame work for false ceiling (grid size 600x600mm) fixed to wall with rawl plugs and screws and hang to roof members with 6mm dia GI wire (upto 120mm length) adjusting level fixed to roof slab by mean of ceiling cleats made out of GI 40x3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long with and including 10mm thick Non asbesto fiber cement building board size of 595x595mm fixed or laid /inserted to timber/GI/Aluminium frame work complete all as specified.

S/F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered & or riveted, or forged into spikes, framed guard bars etc & similar work conforming to Fe.290 Gde E-165.complete all as specified and as directed.

M&L MS Framed work confirming to Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete

S&F mild steel work in framing, purlins etc using sections such as angle, hollow pipes , flats etc using Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive paint over a coat of Epoxy primer, on steel surfacescomplete all as specified and as directed. (Make-Asian Apcolite or Equal from Berger, Nerolac)

S & F in repair Vitreous china wash down water closet pan (EWC), any color, pedestal pattern fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including cement concrete bedding complete all as specified and directed.

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as specified and as directed.

M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished flat surfaces (Horizontal or sloping) complete all as specified and directed

Supply only liquid water proofing compound complete all as specified.

M&L for Preparation of existing treated surface and applying one coat of exterior anti fungal acrylic emulsion paint (Apex ultima protek (Asian paint) at any storey, including provn and removal after use, of necessary scaffolding, complete all all as specified and as directed.

M&L for complete removal of old finishes surfaces of walls including washing rubbing down and stopping of distempered and painted and applying two coat of distemper oil emulsion over a coat of 1.5mm thick wall care putty including filling of nail holes/ disturbed surface by cementious wall care putty all as specified and as directed.

M&L for preparation of old plastered surfaces of walls including rubbing down surfaces applying one coat of oil bound distemper (washable) all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling including rubbing down surfaces on ceiling including filling of nail holes/disturbed surfaces by cementitious wall care putty and applying one coat of whitewash all as specified

M&L for preparation of old plastered surfaces of ceiling including rubbing down surfaces applying one coat of oil bound distemper (washable) all as specified and as directed.

M&L preparing old treated surface of wood or wood based material of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparing old treated steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L preparing old treated surface of steel of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

Writing letters or figures (Block. Roman, Italic or Indian) 40 cm high complete all as specified and as directed.

Writing letters or figures (Block. Roman, Italic or Indian) 10 cm high complete all as specified and as directed.

S&F in repairs providing Plain, Aluminium sheeting of 0.56 thk sheet, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing cut torequired width and length and fixed over crumble section in any position and height , sheet fixed using screws and plugs to wall/column/ceiling etc complete all as specified and as directed.

S&F in repairs powder coated anodised aluminium frame windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (Sliding type/Side hung type)

S&F in repairs powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F in repairs sheet glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F in repairs sheet glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc n. exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F Figured glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S&F in repairs Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F in repairs Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangement complete with following section :- (i) Outer frame 50.8x25.40x1.5mm (ii) 3 Track frame 43.66x22x1.22mm (iii) Shutter fame 31.801x14.50x1.20mm (iv) Shutter interlock 31.80x20.50x1.20mm

S&F Aluminum powder coated fixed type windows including suitable nylon beading channel gasket etc complete with following specification :- Frame :- 60mmx40mmx1.80mm Panel :- Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface (300x 200x 6-7 mm or 600x300x 6-7mm) thick Such as skirting or dados laid over cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl backing coat in CM 1:4, 10mm thick for fixing tiles as in skirting/dado all as specified and directed.(Make-Johnson/Somany/Kajaria)

M&L Non skid ceramic tile (7-8)mm thick area of each tile exc. 0.09 sqm but n exc 0.16 sqm thick in floor over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in eppoxy joint filling minimumum 5mm depth and 2mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid seprately)

M&L for epoxy tile joint filling on floor walls complete all as per manufacture instruction complete all as specified and as directed.

M&L for White cement joint filling of floors after removal of existing joint filling and cleaning work with blower etc all as specified and directed.

M&L Non-Skid Ceramic tiles (7-8)mm thk of size exceeding 0.18 sqm but not exceeding 0.38 sqm in floors with approved Pattern over and including cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non-Skid Ceramic tiles (7-8)mm thk of size exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting over and including cement backing coat 10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L in repairs chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and including 20 mm thick screed bed in CM 1;6 and including taking down old tiles (make-Eurocon/sirex/Johnson)

Demolition of stone slabs/tiles of any description or thickness laid and bedded in any motar complete all as specified and as directed.

M & L for 20mm thick granite stone slab( Jet black ) over and including cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed .

M & L for Machine cut kota stone slab flooring 20-25mm thick over and cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L PCC 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor complete all as specified.

M&L PCC 40mm thick type B0 1:2:4 (using 12.5 mm graded stone agg) as in floor smooth finishes complete all as specified.

Demolition of brick work/ stone /boulders masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed

M&L pre cast cement concrete block masonry 1;3;6 Type C1 with solid blocks exec 10 cm in width and setting in CM 1:6 (make as approved by GE) complete all as specified and as directed.

Taking down chowkats n.exc 1.5Sqm but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and as directed.

M/L 2nd class Hw Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

M/L 2nd class HW 35mm thick Plain framed, panelled factory made shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M/L 2nd class HW 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (B); supplied and fitted to chowkats complete all as specified and as directed.

M/L preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S/F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing(Make-Festel/Polycast)

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick with particle board core (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing (Make-Festel/Polycast)

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

M/L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing hold fast including necessary form work complete all as specified and as directed.

S/F MS hold fast made out of FI 40x6mm complete all as specified and as directed.

S/F 100mm stainless steel butt hinges, medium wt complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S/F 75mm stainless steel butt hinges, medium wt complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S/F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed (Make:Crown / Jyothi / Argent )

S/F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed (Make:Crown / Jyothi / Argent )

S/F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

S/F 125mm long Aluminium handles, cast type, anodised complete all as specified and as directed. ( Make:Crown / Jyothi / Argent )

Demolition of existing roof treatment including old tarfelt in any thickness from roof surface incl cleaning of surface by water removing dust by pressure pump etc and remove all debris from roof surface at any height and disposing off out side MoD land complete all as specified and as directed.

M/L screed bed or bedding layer of mortar 15mm in CM 1:4 (using WPC) for laying roof treatment complete all as specified and directed.

M & L The water proofing treatment in Five course and shall be carried out as follows: -(i) Apply a coat of oil based bituminous primer @ 200 gram / square metre on the prepared surface. (ii) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (iii) Provide and lay 4mm thick APP modified torch applied water proofing membrane weighing not less than 4.00 Kg per square meter reinforced with non woven polyester matt, weighing not less than 160gm/sqm having softening point not less than 1400C, Longitudinal tensile strength not less than 650 N/5 CM, tear strength of 180N(Min), a static puncture resistance of 180, keeping a minimum of 10 cm over laps and 15cm end lap. (iv) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (v) Finishing surface with solar reflective bituminous aluminium paint, @ 100 gm/Sqm.

M&L for water proofing treatment over roof surface with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. Annular space of down take water pipe shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. water ponding for minimum for 48 hours and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over a sustrate using spray/ squngee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete of thickness 50mm 1:2:4 mix type B1 with approved water proofing compound to maintain drainage of water easily Complete all as specified and directed by Engr-in-charge. (Water proofing compound measured at paid septrately) Make:- FOSROC or equivalent.

M&L for water proofing for sunken slabs including all materials as per the stages described below, complete all as specified and as directed. (a)Remove all dust, oil, dirt, laitance and other containments, loose particles from concrete surface . (b) Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. (c) Annular space of out let/spout pipes shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. (d) Carrying out ponding for minimum of 48 hours (e) Injection grouting of all leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. (f) Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over the surface using spray/ squngee/ roller/ brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed. Make:- FOSROC or equivalent as approved.

M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified

M&L for PCC type D2 1:4:8 (40mm aggregate) in sunken floor of toilet/bathroom finished fair and even complete all as specified and as directed.

S&F in repairs Door closer hydraulically regulated (Aluminium exturded section body ),designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

M&L preparing old treated surface of existing treatment on external surfaces of wall and applying one coat cement based paint including filling cementious exterior grade wall care putty on disturbed portion of wall as required all as specified Make: Berger Durocem/indigo royal indigocem/Snowcem plus etc., as approved by GE

M&L in repairs for door bottom sealer seal, door draft Guard with Nylon brisltes made up of (aluminium or PVC) and fixed with screw of any colour complete all as specified

S/F in repair 4mm thick Non asbestos fibre cement building boards in wall/ceiling jointless finish with jointing compound and jointing tape as per manufacturer instructions fixed or laid/inserted to timber/GI/Aluminium framework with self tapping screws complete all as specified

M&L in repairs for 18-19mm thick Marine plywood with laminated mica sheet glossy finished (not less than 1mm) covered kitchen cabinets, water proof, termite & Borer proof, corrosion free with melamine polished shutter complete all as directed .

M&L in repairs for auto closer counter sunk hinges for kitchen cabinet and cuboard complete all as directed .

Opening the man holes of septic tanks, removing night soil, other sediments, solid waste, and liquid waste in any condition by pumping or any other mechanical means, using sewage truck cleaning internal surfaces of the tank with clean water and refix the man hole cover on completion of work, complete all as specified and as directed by Engineer In Charge. Notes:- (a) The night soil, other sediments, solid waste, and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and NB(K) Premises on closed containers/conveyance and disposed off out side defence land (b) Disposal of the same shall be the responsibility of the contractor with out any extra expenditure to government. Disposal of waste shall be made in accordance with the regulations of authorities concerned. (c) The unit rate quoted shall be deemed to be inclusive of cleaning the nearest MH & sewage line from that MH to septic tank.

All as per item No 146 above but for manholes of plan area n exc 1 Sqm and depth upto 0.50m complete all as specified and as directed.

All as per item No 146 above but for manholes of plan area n exc 1 Sqm and depth from 0.50 to 1.00 m complete all as specified and as directed.

All as per item No 146 above but for manholes of plan area n exc 1 Sqm and depth more than 1.00m complete all as specified and as directed.

Cleaning of sewage line/effluent drains 100mm dia below/above GL to remove blockage and ensuring free flow complete all as specified and as directed..

Cleaning of sewage line/effluent drains 150mm dia below/above GL to remove blockage and ensuring free flow complete all as specified and as directed..

Cleaning of culvert and covered drains of any size incl removal of RCC cover slab and refixing in same position after cleaning incl setting and joining the cover slab in cement mortar 1:6 and removing the silt and dirt to a distance exc 200 and n,exc 250 m from starting point and disposed off (span of culvert upto 1m) complete all as specified and as directed.

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in single storied/ground floor of multistoried bldgs complete all as specified and as directed.

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in multistorey buildings except grounf floor complete all as specified and as directed.

Destruction and removal of growth of weed plants with roots from roof , walls or any other part of bldg, at any position of bldg height upto 16.00mtr (including scafolding or ladder) , by completely removing the growth and applying 2.40 'D' oil mixed with Veedol chemical solution and sprayed on and around location of growth and at places of possible growth of weeds and making good damaged surfaces in cement mortar 1:4 of PCC 1:1 1/2:3 as required and directed.

Notes for item Nos 146 to 155 (should be completed in 6 hours) (a) Safaiwala as per requirement will be present on all working days 0830 hrs to 1700 hrs and report to complaint cell for collecting the complaints and all complaints to be attend (except major complaints) within 8 hours, if not attended on same day an amount of Rs 250/- per complaints will be deducted from the contractor's payment for not attending complaints. 2. The nature of complaint (Either Major or Minor) will be decided by Engr-in-charge

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and as directed..

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, 100mm pipe complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, etc as required, dia of pipe 110mm complete all as specified and as directed.

M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 100mm complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains,making good to pipe and rendering cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required of 150 mm bore complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed.

Removing excavated material exc. 250m but n.exc 500mand depositing where directed

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as directed by engineer in charge.

M&L Providing precast cement concrete in cover slabs for man holes, beam and retaing wall etc and similar articles with plain faces, Type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed.

M&L Mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and as directed.

M&L RCC (Nominal mix) Type B1 1:2:4 (20mm graded aggreagate) for Beams, cantilevers, bressumm?ers, lintels over 1.5m span or beam of any thickness size or shape including formwork complete all as specified and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) complete all as specified and as directed.

M&L PCC1:3:6 type C2 using 40mm aggregate 75mm thick in plinth protection, surface to be finished even and fair complete all as specified and as directed.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified

M&L for 100 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for forming contraction(dummy) joints 65mm deepx10mm wide filled with sealing compound Grade A complete all as specified and as directed.

M&L for Coarse aggregate of grading 12.5mm to 4.75mm as in cushion for paver block spread and levelled in layers n exc. 25 cm thick well rammed including watering as required complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block M-35 grade any shape and size confirming to SI 15658-2006 of 40mm thickness, with grey cement and pigment complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block M-35 grade any shape and size confirming to SI 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block M-40 gradeany shape and size confirming to SI 15658-2006 of 80 mm thickness, with grey cement and pigment complete all as specified and as directed.

Dismantling and refixing the same machine pressed precast concrete interlocking paver block any shape with grey cement complete all as specified and as directed Note :- After removing existing interlocking paver block necessary levelling of coarse aggregate for cushoning below paver block graded from 12.5mm to 4.75mm spreading and levelling in layers of thickness 50mm shall be carried out before laying.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating, incl necessary form work complete all as specified and directed.

M&L PCC 1:2:4 type B1 with 20mm graded aggregate as in coping, incl necessary form work complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar 1:4 on fair face of brick work, surface finished even and smooth with out using extra cement using water proofing compound (WPC shall be measured and paid seperately)

M&L for Cement concrete of type C2 1:3:6(40mm graded aggregate) in surface channels and drains complete all as specified and as directed.

Taking down rainwater pipe,eaves gutter and AC vent pipe of any size including AC gutters,etc incl all fittings complete all as specified and as directed.

S & F in repairs 220 mm width rectangular UPVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips stop end drop etc complete all as specified.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of height up to 15 m, 75mm bore pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of height up to 15 m, 110mm bore pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius with access door, 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius with access door, 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) vent cowl slotted, 110mm complete all as specified and as directed.

S&F in repair PVC (SWR) vent cowl slotted, 75mm complete all as specified and as directed.

M&L provide 40 mm dia PVC pipe in any length with rubber ring joints fixed to wall complete all as specified and directed.(Make:Prince/Supreme/Finolex)

S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece (single Y)equal or unequal, 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR)branch piece (single Y)equal or unequal, 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 75 mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal 110 mm bore complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out portion embedded in natural ground and making good disturbed ground complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L plain cement concrete type D2, mix 1:4:8 with 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) MS round bars including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Dismantling chain link fencing, wire mesh etc any type /size complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type, weighing not less than 3 Kg per Sqm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, in repair complete all as specified and as directed.

Mild steel screw bolts(machine made) with hexagonal or square heads at oneend and screwed the other, orscrewed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length exc 5cm n exc 10cm, diameter of neck 11 to 15mm complete all as specified and as directed.

S&F PVC coated chain link fencing ( mesh 50 mm X 50 mm size) nominal dia of wire 3 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified (nuts and bolts shall be measured seperately)

Note for Item Nos 156 to 206 (should be completed in 7 days) 1. Safaiwala as per requirement will be present on all working days 0830 hrs to 1700 hrs and report to complaint cell for collecting the complaints and all complaints to be attend (except major complaints) within 8 hours, if not attended on same day an amount of Rs 250/- per complaints will be deducted from the contractor's payment for not attending complaints. 2. The nature of complaint (Either Major or Minor) will be decided by Engr-in-charge

Taking down Copper/ aluminium point wiring (light, fan, socket, bell, power point) complete fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type, building security light removing materials to store for keeping in safe custdoy for taking credit to match with existing suface all as specified and directed.

Material and labour for point wiring for one light with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm Depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge.

All as per item No. 208 here-in-before but for one fan point controlled by one push button on independent board. complete all as specified and as directed.

All as per item No. 208 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 208 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 208 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No. 208 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheated cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F Modular Bell Push 6A, 1 module, complete all as specified and as directed.

S&F electric bell, AC 230 Volt single pole complete all as specified and as directed.

S&F switch piano flush type single pole one way 5 Amp one way complete all as specified and as directed.

S&F switch modular 6 Amps 240 Volts one way switch complete all as specified.

S&F switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

S&F Switch modular type AC 240 volts 16 Amps one way complete all as specified.

S&F in socket outlet multipurpose 5 and 15 Amps, 3 pin, 2 in 1 complete all as specified and directed.

S&F in Socket 6 Amps AC 240 Volts 2/3 pin combined 2 modular type complete all as specified.

S&F in repairs Socket 6A/16 Amps-2/3 pin combined AC 240 Volts modular type complete all as specified.Make -Legrand,havells ,honeywell.

S&F fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

S&F ceiling rose surface bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed.

S&F in repairs bell push flush type 5 Amps single pole complete all as specified and as directed.

S&F in repairs capacitor for ceiling fans,230 volts, 2.5 MFD including necessary soldering complete all as specified and as directed. Make : Havells

S&F in repairs, capacitor for any type of exhaust fan/ pedestial fan/ air circulator fan 230 volts AC including necessary soldering of capacity 4 MFD complete all as specified and directed. Make Havells Cat Part No. QHPCWC5004X0 or Keltron.

S&F in repairs, lamp holder, PVC/ poly carbonate type with back plate suitable for batten fittings, all as specified and directed.

M&L in repairs sub main wiring with 4 runs of 10 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC Casing & Capping / medium grade, non metallic, PVC conduits and all accessories, with 1 run of 10 Sq mm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper/ Emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified. Note:- Five run of cable and one run of PVC casing and caping shall be measured as one unit.

All as per item No 229 here-in-before but 2 runs of 4 sq mm single core FRLSH copper conductor and 1 run of 4 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit.

All as per item No 229 here-in-before but 2 runs of 6 sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing. Note:- Three run of cable and one run of PVC casing and caping shall be measured as one unit.

All as per item No. 229 here-in-before but 4 runs of 16 sq mm single core FRLSH copper conductor and 1 run of 16 sqmm conductor for earthing. Note:- Five run of cable and one run of PVC conduits shall be measured as one unit.

S&F in repairs, Sheet Metal Enclosure for MCB DB, TPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make: L&T Cat Part No. DBTPN004DDS or Legrand/ Schneider

S&F in repairs, Sheet Metal Enclosure for MCB DB, TPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make: L&T Cat Part No. DBTPN008DDS or Legrand/ Schneider

S&F in repairs, Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make: L&T Cat Part No. DBSPN008DDS or Legrand/ Schneider

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make: L&T Cat Part No. BB40400C to BB40630C or Legrand/ Schneider

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 16 To 32 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make: L&T Cat Part No. BB40160C to BB30320C or Legrand/ Schneider

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make: L&T Cat Part No. BB30320C or Legrand/ Schneider

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make: L&T Cat Part No. BB20060C-BB20320C or Legrand/ Schneider

S&F bulkhead fitting of 20 Watt of suitable material, complete with all necessary accessories such as nuts, washers, and sealing gaskets complete all as specified and as directed. Make: Philips Cat Part No WT045C LED20/NW PSU CFWL1665

S&F in repairs LED light fitting 20 W, high performance batten ,not less the 120 lumen /watt 220 volt ,50 Hz, surface mounted high quality aluminium extruded with all connecting accessories ,with suitable connection complete all as specified. Make : Philips Cat Part No BN100C LED40S-6500 PSU L120 GR S4 or Havells/ Crompton.

S&F in repairs LED light Fiting 10 watt 50 hz,230 volts with all accessories and connection to the electric circuit complete all as specified. Make : Philips Cat part No 582108 or Havells/ Crompton

Supply & fix LED bulb 15 watt, 230 volt not less then the 120 lumen /watt complete all as specified and directed Make: Philips Cat part No 15W Stellar bright LED Lamp B22.

S&F in repairs sunken box with Modular white cover plate 3 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in repairs sunken box with Modular white cover plate 4 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in repairs sunken box with Modular white cover plate 6 module with removing old type sunken boxes /wooden board and match with existing surfaces , complete all as specified.

S&F in repairs SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified. Make: L&T or equivalent as approved by GE.

S&F in repairs XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 6 sq.mm 2 core including taking down old unserviceable cable complete all as specified.

S&F in repairs XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 10 sq.mm 4 core including taking down old unserviceable cable complete all as specified.

S&F in repairs LED building security light 35 watts ,50 Hz,220 volts having IP-65 protection, pressure die cast aluminium housing, high luminious efficiancy and high power complete all as specified. Make : Philips Cat Part No BRP030 LED35 or Havells/ Crompton

Taking down existing ceiling fans of 1200 mm sweep of any make and removing to workshop for following repairs and refixing at same location/ other location complete all as specified and directed by Engr-in-Charge:- (a) Opening & Strip cutting the winding of ceiling fans and re-winding with super enamelled copper wire of suitable/ existing size, with sleeves, heating, baking etc. and re-assembling the same. (b) Replacement of Ball bearings of suitable size. (c) Replacement of fan capacitor of suitable capacity. (d) Replacement of split pin, Nickel plated mild steel clamps, nuts, bolts washer suitable for any make & type ceiling fans (e) Rubber real insulator with clamps, bolt, nuts and split pin (f) Screws of suitable size for blades & body

Same as item No. 251 above but for steel body exhaust fan 250 to 450 mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current moto (BLDC) complete all as specified and as directed. Note: Old fan will be deposited in MES store yard Make: Orient Model Ecotech Neu BLDC 5 star/ Crompton Cat Part No. Energion Groove/ Usha Cat Part No. Energia 32

S&F in repairs PVC body exhaust fan motor suitable for 250/300 mm of any make as per site requirement all as specified and directed.

S&F in repairs exhaust fan motor suitable for metallic body exhaust fan of any make as per site requirement all as specified and directed.

Supply & fix PVC body wall fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting. Make : Havells, crompton and other equevelent make ,all as specified. Make : Havells/ Crompton/ Usha

Attending complaint including transportion of tools for rectification of urgent nature of electrical complaints like checking of existing electrical items for continuous electric supply including carrying out minor repairs such as checking of voltage calibration,checking of variation of R Y B phase in LT panel/DBs ,changing of MCBs, small pieces of wires including connections etc carrying out repairs such as tightening of loosen electric connections, nuts, bolts, screws of switches, sockets, switch boards, making joints and covering with PVC tape, minor repairs to ceiling fans / exhaust fans like replacement of capacitors, cleaning and oiling etc. as required to make the electrical items/ appliances fully functional at SMA area at Naval Base during off hours (1700 hrs evining to 0900 Hrs morning) on all working days all as specified and directed by Engineer-in-Charge. NOTE:- (i) The contractor should display contact number at complaint cell to register users complaint. (ii) The recovery of rupees 400 per complaints will be charged if contractor failed to attend that instipulated time period. (iii) Number of complaints may vary day to day and shall be on required basis. Contractor shall quote their rates accordingly.including in all aspects like labours,tool,transportation etc.

M&L for checking of ceiling fans stability (like fan hooks,nuts, bolts ,hanging rod ,canopy ,washer etc) exhaust fan stability ,loose connection in destribution boards,MCBs in SMA Area at Naval base all as specified and directed by engr in charge. Note: - 1. The contractor should prepaired a register and enter office name with signature of offce incharge and submited to engineer in charge office. 2. Checking of 7 fans and 2 DBs of any type at a time is shall be considered as one job.

M&L for checking of faulty / jumped energy meter (three phase /single phase) with fixing of new energy meter in series and after one week submmitted meter reading report of both energy meter in engr in charge office all as specified and directed by engr in charge

S&F in repairs SS enclosure suitable for MCCB 100-200 amp complete all as specified and directed.Make L & T cat CM91003OOOO or Schneider or Legrand

S&F in repairs MCCBs FP 63 Amps thermal magnatic 25 kA complete all as specified and directed by Engineer in Charge. Make L & TSchneider and Legrand

S&F in repairs MCCBs FP 100 Amps thermal magnatic 25 kA complete all as specified and directed by Engineer in Charge. Make L & T Cat No CM90642OOLO or Schneider or Legrand

S&F in repairs on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

All as per item No. 263 here-in-before but of size 25 mm dia

All as per item No. 263 here-in-before but of size 20 mm dia

S/F in repairs CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S/F in repairs CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S/F in repairs CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S&F in repairs of bib tap Chromium plated (CP), half turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera cat Part No F2004151 or prayag/hindware)

S&F in repairs of bib tap Chromium plated (CP),half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm and taking down old ,complete all as specified and as directed by the Engineer-in-charge. (Make : Cera cat Part No F2004152 or prayag/hindware)

S&F in repairs of Chromium plated (CP) bib cock short body with flange and nozzle for garden/wahing machine of size 15mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 2003153 or prayag/hindware)

S&F in repairs of two way bib cock ,half turn with flange and areator of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge(Make : Cera Model No F 2004163 or prayag/hindware)

S&F in repairs concealed stop cock regular body, half turn with flange chromium plated CP cup fancy type of size 20mm and taking down old one, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 2004351 and F4050502 or prayag/hindware)

S&F 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge.(Make : Cera Model No F 21018201 or prayag/ hindware)

S&F in repairs of swivel overhead shower (minimum weight 40grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one,complete and all as specified and as directed by the Engineer-in-charge.

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge.

S&F in repairs health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out old one all as per specified and directed (Make : Cera Model No F 8030102 or prayag/hindware).

S&F in repairs pillar taps, half turn with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified and directed by the Engineer-in-charge. (Make : Cera or prayag/hindware).

S&F single phase 230 volts ,pressure /booster pump of 0.5 HP including controller of boost pump suitable for 25x25 pipes complete all as specified directed by Engr -in -charge: Make - V-Guard or equivalent make in PS/ approved by GE.

M&L for cutting chasses on walls floor etc not exceeding 10cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed by the Engineer-in-charge.

Taking down defective Geyser of capacity 25 ltrs from its existing position duly disconnected inlet/outlet water connection and opening up geyser for checking old defective parts and replaced the defective parts which required for repairing including testing and commissioning the same after successful repairing complete including refixing the same on its existing position and making connection inlet/outlet water connection complete all as specified and directed by Engr-in-charge. Note : The spares required for servicing the geyser shoud be paid seperately under releveant item of the schedule.

Supply only Thermostate suitable for 25 and 50 litrs capacity Geyser any make/type including taking out old one complete all as specified and directed by Engr-in-charge..

Supply only Heating element 1.5 KW/2 KW ISI marked for 25 and 50 litrs capacity Geyser any make/type including taking out old one complete all as specified and directed by Engr-in-charge..

S&F Chromium Plated Pipe for Hot and Cold water as per suitable length 12mm dia with two brass adopter and connecting up complete including taking out old one complete all as specified and directed by Engr-in-charge..

S/F in repairs float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in repairs float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S/F in repairs float valve synthetic(PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed

S&F in repairs CP angle cock,Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe,complete all as specified (Make : Cera Model No:F 9020203 or prayag/hindware).

S&F in repairs of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters incl taking out u/s old one Make : Sintex (ISI)/ Aquatech

All as per item No. 289 above but 1000 ltr cap.

All as per item No. 289 above but 500 ltr cap.

S&F in repairs wall mixer (3- in - 1) with arrangment of both Telephonic shower and over head shower with 210 mm long bend pipeand taking down old unserviceble one complete all as specified and as directed by the Engineer in Charge. Make- CERA Cat Part No. F1018403 or equivalent in Jaquar/ Prayag).

Material, labour, transport and tools for rectification of urgent nature water supply complaints at Naval Base as and when required (SMA Area, Naval Base Kochi) during all working day ,sunday/ holyday /off hours on all working days all as directed by Engineer-in-Charge.

S&F in repairs rotate and lock type cover for over head water tank (HDPE) of capacity 200 Ltrs including taking down old unserviceble tank cover complete all as specified.

S&F in repairs rotate and lock type cover for over head water tank (HDPE) of capacity 500 Ltrs including taking down old unserviceble tank cover complete all as specified.

S&F in repairs rotate and lock type cover for over head water tank (HDPE) of capacity 1000 Ltrs including taking down old unserviceble tank cover complete all as specified.

S&F in repairs rotate and lock type cover for over head water tank (HDPE) of capacity 2000 Ltrs including taking down old unserviceble tank cover complete all as specified.

M&L for scrubbing cleaning,thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of HDPE storage tanks OF below 500 Ltrs (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " DATE OF CLEANING" in capital letters of suitable size on outside visible place of with synthetic enamel paint(white) over black back ground of 500 ltrs capacities complete all as specified.

All as per item No. 298 here-in-above, but 1000 litres capacity complete all as specified.

All as per item No. 298 here-in-above, but 2000 litres capacity complete all as specified.

M&L for scrubbing cleaning,thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of RCC storage tanks 2000 Ltrs (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " DATE OF CLEANING" in capital letters of suitable size on outside visible place of with synthetic enamel paint(white) over black back ground of 2000 ltrs capacities complete all as specified.

S&F of Kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete including taking down old one complete all as specified and as directed .Model No: F2004251 of CERA or Prayag /Jaguar/hindware.

S&F in repairs Plug top 15 amp 230 V, complete all as directed.

S&F fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of 25 Ltr complete all as specified and as directed by Engr-in-charge.

M&L for preparing the surface of any type, any make geyser, removing the existing painting by scraping, cleaning, filling the cavities and applying two coats of red oxide primer including writing the MES number complete all as specified and as directed for the size 25 Ltrs capacity.

S&F pressure/air release valve suitable for any type any make geyser made out of brass 15 mm complete all as specified and as directed.

S&F angle valve 2 in 1 of size 15 mm dia complete all as specified and as directed.

S&F CPVC tank connector of size 32 mm dia complete all as specified and as directed.

S&F heavy spindle of size 15 mm dia complete all as specified and as directed.

S&F normal spindle of size 15 mm dia complete all as specified and directed.

S&F vertical type Geyser (Water Storage Heater) 25 litres, 230 volt., 50 Hz, working pressure 0.8 mpa with storage tank of mild steel material 5 star rating including necessary grouting complete all as specified and directed. Make : V-Guard Cat Part No. SPRINHOT PLUS / Havells / Bajaj / Crompton or equivalent manufacturers mentioned in list of manufacturers complete all as specified and as directed.

S&F wall mixer spindle of size 20 mm dia complete all as specified and directed.

S&F wall mixer knob of suitable size complete all as specified and directed.

S&F concealed cock spindel of size 15 mm dia complete all as specified and directed.

Powertech Engineers (BID ID -3501657)

Suprisons (BID ID -3503614)