Macadamization of Link Road to JNV School Hubbi, Macadamization of link road to Eco Park Kandi, Macadamization of internal link roads of Kotranka Town

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means)

Supplying and stacking at site graded stone aggregate of size range 63mm to 45 mm

Supplying and stacking at site Stone screening of size 11.2mm nominal size

Supplying and stacking at site Good Earth

Laying WATER BOUND MACADAM Grade II with crushed stone aggregate and binding material including screening of 11.2mm size and stone dust sorting, spreading to template and consolidation with power road roller of 8 -10 Ton capacity complete.( Finished with including materials and labour (53mm to 22.50mm size aggregate with 11.2mm size screening,

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm

Providing and laying bitumen macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer – in – Charge 50 to 100 mm average compacted thickness with bitumen of grade VG -10 @ 3.5% (Percentage by weight of total mix) prepared in drum Type Hot Mix plant of 100-120 TPH capacity.

2 cm premix carpet surfacing with 1.8cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 size respectively, per 100 sqm and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.